News - page 15
Daily news from plastic industry, plastics processing, packaging, plastics and machinery.
ORCCA industry s.r.o. provides disassembly and installation of machines and production technologies
- 23.11.2021
- Latest News
- Service of machines
ORCCA industry s.r.o. would like to introduce you to their services. The company makes complete transfers in plants or transports between...
In 2019, the European Union recycled 41% of plastic packaging waste
In 2019, each person living in the EU generated 34.4 kg of plastic packaging waste, out of which 14.1 kg was recycled. Between 2009 and 2019, the volume of plastic packaging waste generated per inhabitant increased by 24% (+6.7 kg). The recycling volume of plastic packaging waste increased sharply...
Invitation to the webinar of SMARTPLAST s.r.o. - Influence of residual stress on deformations and part quality
- 18.11.2021
- Latest News
- Injection molding
- Webinar
Residual stresses are mechanical residual stresses that arise in the injection molded part during production. They remain built into the spray even after being ejected from the mold cavity and throughout the life...
Good results of the MOL group for the 3rd quarter 2021
- 11.11.2021
- Latest News
- Business economics
MOL Group announced financial results for the third quarter of 2021. Thanks to a favorable macroeconomic environment, doubling of petrochemical margins compared to last year and internal performance, net CCS EBIDTA (earnings before interest, taxes, depreciation and amortization, net of inventory...
News overview - Possibilities of obtaining a grant in the Slovak Republic for November 2021
- 10.11.2021
- Latest News
- Events
Overview of new grants in November...
Bag - Plastic or paper? The answer is an ECO bag from GRANITOL
- 09.11.2021
- Latest News
- Packaging
- Recycled plastics
Paper production is much more energy intensive than plastic production. The production of paper bags pollutes the environment more by emitting greenhouse gases CO2, has significantly higher demands on the consumption of water, energy, fuels, and occupies a larger percentage of the volume of...
The Digital Factory 2.0 at MSV will focus on the technological transformation of the economy
The main topic of the International Engineering Fair, which takes place from 8 to 12 November 2021 at the Brno Exhibition Center, will be the digitization of industry. MSV will clearly show how the innovation strategies of Czech industry can be fulfilled and how the digitization of production...
FORT-PLASTY s.r.o. will also present its new products at MSV Brno 2021.
The 62nd International Engineering Fair in Brno will open its doors on November 8 - 12, 2021. The company FORT-PLASTY s.r.o., which operates in the field of plastics processing using thermoforming and hot air welding technology, will also be part of this year's...
The content of bioplastics can be verified by the radiocarbon method
- 04.11.2021
- Latest News
- Bioplastics
- Testing of plastics
In recent years, Greenwashing has forced brand owners to look for creative solutions to prove that their packaging materials are truly plant-based. The 14C carbon isotope monitoring method, commonly associated with the dating of archaeological finds, can verify that the packaging contains the...
Visit the stand of EUROIMPEX CZ s.r.o. at the fair MSV Brno 2021
- 03.11.2021
- Latest News
- MSV Brno
- Peripherals
- Exhibitions
Euroimpex CZ has been operating on the Czech and Slovak markets for more than 20 years as a partner of major commercial Italian suppliers for the plastics...
Invitation from Shimadzu to MSV Brno 2021
- 02.11.2021
- Latest News
- MSV Brno
- Exhibitions
Shimadzu Handels GmbH - organizational unit is a company that manufactures the widest range of instruments for instrumental analytics, materials testing and life science, invites you to the fair MSV Brno, which will take place November 8 - 12,...
The company DATRIA s.r.o. invites to the fair MSV Brno 2021
- 27.10.2021
- Latest News
- MSV Brno
- Exhibitions
Spoločnosť DATRIA s.r.o., česká výrobno-obchodná spoločnosť, čerpajúca z viac ako 20 ročných skúseností v plastikárskom a gumárenskom odbore, Vás pozýva na veľtrh MSV Brno 2021, ktorý sa uskutoční v dňoch 8. - 12. novembra...
More than 1,470 exhibitors at the international fair for plastics processors FAKUMA 2021
- 26.10.2021
- Latest News
- FAKUMA
- Exhibitions
The 27th Fakuma international trade fair for plastics processing celebrated an inspiring restart in Friedrichshafen from the 12th through the 16th of October, 2021. 1470 exhibitors from 39 countries came to Lake Constance for the first major international on-site event for the plastics industry...
International Engineering Fair 2021 in the sign of restart
- 26.10.2021
- Latest News
- MSV Brno
- Exhibitions
This year's 62nd International Engineering Fair, which takes place from 8 to 12 November at the Brno Exhibition Center, will once again present the latest and most innovative industrial technologies. The main topic is the digitization of industry, which will be highlighted in a special exhibition...
MCAE Systems will present the largest exhibition of 3D technology at the International Engineering Fair
After a break, the International Engineering Fair in Brno is being prepared again, which for several years also includes an exhibition of 3D printing, which annually exhibits the largest supplier of innovative 3D technologies in the Czech Republic and Slovakia, MCAE Systems,...
AHK Industrial Suppliers Forum 2021
- 21.10.2021
- Latest News
- Events
The AHK Industrial Suppliers Forum 2021, organized by the network of German Chambers of Commerce Abroad (AHK), offers you the ideal opportunity to present yourself on the German market and establish or expand business contacts. This European supplier platform is the largest of its kind in Europe....
Attend a free webinar: Conflict between part design and mold, how to further optimize cooling
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. In the last webinar No. 8, we described how the cooling time affects the wall thickness of the part, the type of plastic and fillers, the mold material and the identification of places with difficult heat...
Invitation to MSV Brno 2021 from the company ADDIPLAST GROUP
- 19.10.2021
- Latest News
- MSV Brno
- Exhibitions
ADDIPLAST GROUP is a specilist in the formulation, production and the coloring of compounds PA6, PA66, PA6.66, PPH, PPC, PPR, PC, ABS/PC, ABS, PBT, PPS, PPO, PLA and the formulation and the production of colored...
Effective and practical solutions for waste recycling are offered by Hard Plastic Recycling s.r.o.
Hard Plastic Recycling s.r.o is a company that specializes in the recycling and efficient processing of various types of plastics in waste...
News overview - Possibilities of obtaining a grant in the Slovak Republic
- 13.10.2021
- Latest News
- Events
New challenges in the Slovak Republic in October...
NICO color masterbatches and additives from UNICOL s.r.o.
UNICOL s.r.o. is actively engaged in the development and production of quality additives and masterbatches for various segments of the plastics...
BOCO PARDUBICE machines, s.r.o. invites to the fair MSV Brno 2021
- 07.10.2021
- Latest News
- MSV Brno
- Exhibitions
The supplier BOCO PARDUBICE machines, s.r.o. was founded in 1994 with a focus on engineering production and today employs about 100 employees. With its technological background and the range of professional services offered, the company is one of the leading European companies in the plastics and...
New website and e-shop of Schier Technik Slovakia s.r.o. with 3D CAD systems and literature
The company Schier Technik Slovakia s.r.o. has been the official reseller of SOLIDWORKS 3D CAD system and related applications for 20 years. The company is focused on the sale, service, training and telephone hotline of SOLIDWORKS family...
MSV Brno 2021 starts in a few weeks
- 04.10.2021
- Latest News
- MSV Brno
- Exhibitions
Companies from the plastics industry cannot wait for the popular Brno trade fair, the 62nd International Engineering Fair. It will open its gates to all visitors from 8 to 12 November...
Oerlikon HRSflow will present hot runner system for small applications at FAKUMA
- 01.10.2021
- Latest News
- FAKUMA
- Hot runners
- Exhibitions
Oerlikon HRSflow - part of the Polymer Processing Solutions Division of the Swiss technology group Oerlikon - is specialized in the development and production of advanced hot runner systems for a wide range of applications in the plastic injection molding industry: from the automotive market to...
Schoeller Allibert presents a new service - rental of plastic boxes
- 30.09.2021
- Latest News
- Plastic products
Business values flexibility in times of crisis. In response to current market needs, Schoeller Allibert adds the possibility of long-term container rental to its...
Invitation to the webinar on injection cooling - SMARTPLAST s.r.o.
- 30.09.2021
- Latest News
- Injection molding
- Webinar
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. The cooling time is the longest part of the injection cycle. It depends mainly on the design of the part, the set injection parameters and the cooling...
Aerosol disinfection can be performed via your merlin® humidification system!
- 28.09.2021
- Latest News
- Disinfection
- MSV Brno
Disinfection of the area with aerosols is a permanent way leading to the achievement of uniform disinfection of the entire area (production area, warehouse, etc.). It is a supplement to the classic disinfection, which is applied by wiping, which strives for the safest possible air in the room. This...
BGS's virtual trade fair, Irradiation Service Days, starts on September 29
- 28.09.2021
- Latest News
- Events
- Radiation technologies
BGS Beta-Gamma-Service, specialised provider in the area of radiation crosslinking and radiation sterilization, is presenting a virtual trade fair this year for the first time. The BGS Irradiation Service Days (ISD) will take place on 29 and 30 September 2021 and focus on radiation crosslinking and...
Tool shop Formy Tachov s.r.o. invites to the FAKUMA
- 27.09.2021
- Latest News
- FAKUMA
- Injection molds
- Exhibitions
The company Formy Tachov s.r.o. invites you to visit the stand at the Fakuma trade fair, which takes place from 12 to 16 October 2021 in the German city of...
Branch Dictionary
