CMS system, optional supplement to injection molds Wittmann Battenfeld, informed about the condition of your machines

Thanks to recent progress in sensor technology and increasing availability of high-speed data networks, CMS systems are now becoming interesting also for less expensive capital goods such as injection molding machines. Here, Wittmann Battenfeld has blazed the trail and offers CMSequipment as an optional extra for its injection molding machines.

In contrast to time-oriented maintenance (preventive maintenance), where machine parts are replaced at fixed intervals regardless of their actual condition, condition monitoring (CM) is based on continuous observation of the parts’ condition(predictive maintenance). The latter approach offers the advantage that replacements depend exclusively on the actual degree of wear and functionality of the parts. The superiority of condition monitoring over preventive maintenance is inherent in the method itself. Forany damage occurring in the course of a maintenance interval normally remains undetected and may therefore even lead to a total breakdown, while the problem could often be remedied at little expense if it was detected in time. The costs for unplanned repairs incurred in this way and the loss of profit caused by the machine standstill are generally higher than the costs of a condition monitoring system.This is all the more important;the more closely the production is linked to a just-in-time supply chain, as is the case, for example, in injection molding production for automotive suppliers. (fig.1)

fig. 1: A condition monitoring system for condition-oriented scheduling of maintenance work increases plant availability in a demand-oriented “just-in-time” supply chain.

Comprehensive CMS package available

At the K2016,WITTMANN BATTENFELD introduced acondition monitoring system (CMS) which is available as an optional equipment package for injection molding machines. It accesses thevalues measured by already existing as well as additional sensors installed for this purpose and passes on these data to a recording system.

fig. 2: The WITTMANN BATTENFELDCMS concept of condition data collection by sensors and subsequent data processing as the decision-making basis for maintenance work.

The CMS system actually monitors the following (fig.2):

• in(servo-) hydraulic machines, the drive function of the hydraulic system (vibrations in the pump drive, current consumption, system pressure),
• in(servo-) hydraulic machines, the quality of the oil (temperature, number of particles in the oil and water content), in all-electric machines, the quality of the gear oil,
• the “climate” inside the electric cabinet (temperature, moisture, possible smoke formation),
• the capacity of cooling water and air supply (flow quantity, pressure, temperature),
• the mechanical parameters of the clamping unit (pressures in the pads of MacroPower machines, vibrations and torques in servo-electric drives),
• the mechanical parameters of the plasticizing/injection unit (vibration,plasticizing torque, screw stroke, closing behavior of the check valve).One cause of vibrationmay be a loose screw in the screw coupling which, if it remains unnoticed, may lead to major consequential damage. (fig.3)

fig. 3: Display example of condition monitoring of the screw drive and check valve function.

Condition data processing on three levels

1.Measurement data collection and display on the machine

The data (temperatures, moisture, signals from the smoke detector inside the electric cabinet) are collected on the machine partly cycle-synchronously and partly dependent on time, and subsequently transmitted to the CMS computer for evaluation. On the machine,the current condition data are displayed compactly on an overview page of the machine’s B8 control system (fig.4). Deviations from pre-set reference values (temperature ranges, air pressure, and smoke detector signals) are visualized by green/red traffic light indicators.

fig. 4: Overview of condition values on the B8 machine control system.

2.Data analysis and processing on the CMShost computer

The heart of the CMS system is the CMS computer. It is part of aproduction control system. It communicates with the injection molding machines and draws the measurement data, collects and saves them for possible later backtracking.The CMS software processes the measurement data into trend-tracking models.

A CMS control station is able to monitor up to 50 machines simultaneously and pass on advance warnings to maintenance staff by email (fig.5).

fig. 5: The monitoring data from up to 50 machines can be collected on one condition monitoring host computer. Where the measured values exceed or fall below tolerance margins, the calculated data trends trigger signals which must be correctly interpreted and followed up by appropriate action on the part of qualified maintenance staff.

3.Data evaluation and condition analysis

Evaluation of the data is based on generally recognized quality standards, such as the NAS (National Aerospace Standard) oil quality assessment1638 or the oil purity rating according to ISO-4406.Empirical limit values are used for judging air and oil pressure values, temperatures or the closing behavior of the check valve.In addition, the vibrations of components exposed to wear are measured by vibration sensors and evaluated by analysis algorithms (see again fig. 2).

Besides current status information, the CMS software also delivers trends indicating changes in functional values. These provide the basis for decision-making by maintenance staff. Should no sufficiently qualified or experienced personnel be available on site for correct interpretation of this decision-making tool, it is also possible to outsource the interpretation of the data to a WITTMANN BATTENFELD service center via online networking and have the necessary maintenance work initiated from there. This service can be supplied by theWITTMANN BATTENFELD service organization(fig.5).

Summary

Condition-oriented machine maintenance offers better failure protection than servicing in fixed regular intervals or a preventive maintenance concept since, due to lack of information, malfunctions developing between maintenance sessions(loose screws, gradual failure of bearings) with a risk of sudden total breakdown are very hard to detect. This is why a CMS system is a useful contribution to improving failure protection of production processes, primarily and in particular for just-in-time production chains. The cost of implementing a condition monitoring system is already compensated for by preventing only a few days of production standstill.