Webinar - Current News Articles - page 2
Articles on Webinar. Daily updated information and news from the plastics industry.
Invitation to the webinar of SMARTPLAST s.r.o. - Influence of residual stress on deformations and part quality
- 18.11.2021
- Latest News
- Injection molding
- Webinar
Residual stresses are mechanical residual stresses that arise in the injection molded part during production. They remain built into the spray even after being ejected from the mold cavity and throughout the life...
Attend a free webinar: Conflict between part design and mold, how to further optimize cooling
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. In the last webinar No. 8, we described how the cooling time affects the wall thickness of the part, the type of plastic and fillers, the mold material and the identification of places with difficult heat...
Invitation to the webinar on injection cooling - SMARTPLAST s.r.o.
- 30.09.2021
- Latest News
- Injection molding
- Webinar
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. The cooling time is the longest part of the injection cycle. It depends mainly on the design of the part, the set injection parameters and the cooling...
Participate in the webinar: Inhomogeneity of injection under pressure-depressions-lunks-air bubbles
- 08.06.2021
- Latest News
- Webinar
SMARTPLAST s.r.o. invites you to a webinar: Injection Inhomogeneities for Pressure-Depression-Lunkry-Air Bubbles, which will take place on June 10, 2021 at 13:00 online. The lecturer is Ing. Petr...
Attend the Plastic Injection webinar from IMCD Czech Republic s.r.o.
- 30.04.2021
- Latest News
- Injection molding
- Webinar
IMCD Czech Republic s.r.o. invites you to a webinar, which continues the long tradition of seminars organized by this company. It will take place on 27.5.2021 from 1...
Attend the webinar - Injection instabilities when filling the mold cavity
- 14.04.2021
- Latest News
- Injection molds
- Webinar
Smartplast s.r.o. He invites you to a webinar entitled Injection instabilities when filling the mold cavity: orientation, cold joints, closed air. The webinar will take place on April 20, 2021 at 1 p.m. The presenter is Ing. Petr...
Invitation to the webinar Form as a heat exchanger
- 09.04.2021
- Latest News
- Injection molds
- Webinar
On Wednesday, April 14, 2021, a webinar "Form as a heat exchanger" will take place, which will take you to Jan...
Is it possible to measure color and gloss at the same time? Don't miss the webinar where you get to know more
- 08.03.2021
- Latest News
- Quality control
- Webinar
The Japanese company Konica Minolta Sensing is launching a new generation of high-end desktop spectral photometers. We invite you to an interactive webinar, on March 18th 2021, where we will introduce these innovative devices to Czech and Slovak users for the first...
Discover ZEISS X-ray quality control of plastic parts
- 24.02.2021
- Latest News
- Events
- Webinar
Carl Zeiss invites you to a webinar to introduce you to the possibilities of ZEISS X-ray quality control technology for plastic parts. The webinar will take place on March 16,...
Zortrax Apoller - webinar from ADATEX, s.r.o.
- 02.09.2020
- Latest News
- Webinar
Webinar on how to achieve great results with Sinterit...
Webinar: Uneven filling of injection mold cavities and how to adjust the filling
- 21.08.2020
- Latest News
- Events
- Webinar
In the webinar from Smartplast s.r.o. you will see the causes of uneven cavity filling, examples of uneven cavity filling, the effect of temperature, shear rate and viscosity, removal of uneven cavity filling and analysis of uneven cavity...
Webinar: What influences the formation of lunks, analysis of the formation of lunks and their removal
- 26.06.2020
- Latest News
- Events
- Webinar
In the webinar from Smartplast s.r.o. you will see the causes of lunking, the influence of design, the influence of the inlet system and the influence of cooling on the formation of lunkers, industrial tomography and prediction of lunk formation using...
JAN SVOBODA s.r.o. and PEWE invite you to a webinar: Indestructible Marking with Panasonic Laser Systems
- 12.06.2020
- Latest News
- Events
- Webinar
The webinar will take place on Wednesday, June 17, 2020 at 10 a.m. It will take about 30...
WEBINAR: How to protect your sensitive data?
- 26.05.2020
- Latest News
- Events
- Webinar
A practical example of how you can handle...
An invitation to education called The Injection Process
- 22.05.2020
- Latest News
- Events
- Injection molding
- Webinar
The Banska Bystrica Regional Chamber of the Slovak Chamber of Commerce and Industry offers training for workers in the field of construction and production of molds for plastic injection focused on the injection...
Polyjet as you do not know it - webinar
- 15.05.2020
- Latest News
- 3D technology
- Events
- Webinar
Are you interested in news in the world of 3D printing? Specifically about PolyJet technology? Would you like to have an up-to-date overview? So don't hesitate and take a look at our 30-minute webinar, where we will introduce you to the hot news, the latest model, the Stratasys J55 3D...
Online Cadmould seminars
German firm SIMCON GmbH, supplier of CADMOULD simulation software and VARIMOS optimization software, represented by Plasty Gabriel...
Offer Stäubli webinars
- 15.04.2020
- Latest News
- Events
- Robotics
- Webinar
The first wave of Stäubli webinars was a great success, so the company decided to prepare...
Current plastics - requirements of chemical legislation
- 08.04.2020
- Latest News
- Events
- Webinar
The webinar is designed for marketers, manufacturers, importers or...
Webinar - Use of 3D technologies in industry
- 06.04.2020
- Latest News
- 3D technology
- Events
- Webinar
Use technologies that save you time and money! Come to our seminar, where we show...
Automotive - communication in the supply chain
- 03.04.2020
- Latest News
- Events
- Automotive
- Webinar
The webinar is intended for workers responsible for the management of chemicals, communication in the supply chain, ensuring the sale / purchase of parts, raw materials, substances and mixtures, importers and manufacturers of chemicals and mixtures and downstream...
New service - PlasticPortal.eu Webinar Service
- 01.04.2020
- Latest News
- Events
- Webinar
In the current period of limited personal contact, it is important to behave responsibly and protect yourself, your business partners and your customers. However, your business must continue to...
.jpg)
Branch Dictionary
