Services - Current News Articles - page 4
Articles on Services. Daily updated information and news from the plastics industry.
-
IPA Slovakia, s.r.o. presents the Quality Forum conference: Only quality people can produce quality?!
The inspiring Quality Forum, which will open its doors for the fourth time this year, will traditionally turn into a fountain of ideas, motivation and the search for meaning in what we do. In quality. Although it is used most often at the conference in all cases, "supporters of quality" know what...
-
SPK members recapitulated but also planned at their general meeting
On June 16, 2022, after a year, representatives of member companies of the Slovak Plastics Cluster (SPK) met again at the Mikádo Hotel in Nitra to evaluate what the year 2021 was...
-
Solid results of the Czech automotive industry despite the decline in production
- 29.06.2022
- Services
- Automotive
A pandemic also affected the performance of the automotive industry in 2021. Its consequences manifested themselves in the sector mainly in the second half of the year. The critical shortage of semiconductor chips, problems in supply and demand chains and logistics, the lack of raw materials,...
-
The NEWMATEC 2022 conference sought answers to current challenges and the future of the automotive industry
- 27.06.2022
- Services
- Events
- Automotive
- Photo reportage
The sixth annual Newmatec conference, which is considered to be the most important Slovak conference focused on the automotive industry, took place in the Hotel Partizan (Slovakia) on June 7-8, 2022. The program, which was dedicated to the current situation, but also to the most fundamental...
-
Production of Czech cars increased by 12.8% in May, approaching pre-crisis numbers
- 17.06.2022
- Services
- Automotive
For the first time this year, the May production of passenger cars in the Czech Republic exceeded the monthly production volumes of last year. The increase in production by 12.8% to 120,186 vehicles means an approach to pre-crisis monthly production volumes. This moderates the current year-on-year...
-
International Engineering Fair 2022 in Nitra - awards and photo report
- 01.06.2022
- Services
- Photo reportage
- MSV Nitra
- Exhibitions
After a two-year break, the 27th International Engineering Fair in Nitra took place on May 24-27, 2022. Visitors were able to visit the exhibitors again, who presented their latest technologies and...
-
MOLDS and PLASTICS 2022 - successful restart of the conference
- 27.05.2022
- Services
- Events
- Photo reportage
More than 120 participants visited the largest Czech plastics conference MOLDS and PLASTICS 2022 in the pleasant surroundings of the Maximus Hotel in Brno, Czech Republic. The conference is traditionally organized by JAN SVOBODA s.r.o. with partners and according to the final reactions of the...
-
MOL Group wants to fill more than 50 jobs with young people - recent university graduates
- 19.05.2022
- Services
- Business economics
MOL Group is opening a call to join for his annual Growww talent program. The development program is an ideal opportunity for recent graduates and graduates of master's or engineering studies who are looking for opportunities to start their careers in one of the largest companies in the...
-
MSV 2022 in Brno, Czech Republic: Major companies across industries will present their products
- 13.05.2022
- Services
- MSV Brno
- Exhibitions
This year's International Engineering Fair, which will take place from 4 to 7 October 2022 at the Brno Exhibition Center, will feature major companies from all branches of engineering. Regular and new exhibitors are preparing their presentation, and a number of companies that could not participate...
-
We visited the Bratislava Motor Show 2022 - photo report
- 03.05.2022
- Services
- Autosalon
- Photo reportage
- Exhibitions
The focus of this year's Bratislava Motor Show was a little different, which we have been used to so far. This year's subtitle "Mobility Salon" provided a cross-section of the possibilities of passenger and commercial transport, electromobility and related...
-
Education in the plastics industry - professional training of SimulPlast s.r.o.
- 21.04.2022
- Services
- Injection molding
The reality of recent years has taught us to get used to rapid and frequent changes in both work and personal life. In manufacturing companies, this is reflected in the constant and often unexpected change of orders, problematic supplies of materials and energy with great price volatility, shortage...
-
K SHOW celebrates its 70th anniversary - remembrance of the first big market in 1952
- 13.04.2022
- Services
- K Show
- Exhibitions
On October 11, 1952, the Messe Düsseldorf exhibition center opened its first large market, the trade fair for the plastics and rubber industry, which is still the largest industry and the largest trade fair in this market. See what the first big market looked...
-
How the specialist from Stepanek3D developing new products?
- 11.04.2022
- Services
- 3D technology
- Prototyping
- Research
How is the development of new products in a short time with the possibility of further piece or even serial production? What materials and technologies are appropriate? What documents should be prepared? We answer these and other questions in the article...
-
Maintenance stories with all wins and losses - IPA Slovakia s.r.o.
The practical maintenance forum celebrates 10 years! We have summarized for you and its moderators what has changed over the last decade, how they have coped with the challenge of the past months, and what stories will be told during the jubilee...
-
Companies and employees of the Czech automotive industry are helping Ukraine
- 18.03.2022
- Services
- Automotive
Despite the difficult situation and the lingering pandemic of COVID-19, the companies of the Czech automotive industry financially and non-financially support the improvement of the situation in Ukraine, its citizens and the families of its Ukrainian...
-
PlasticPortal.eu suspends cooperation with Russian companies
- 15.03.2022
- Services
PlasticPortal.eu joins the democratic world and suspends any promotion of Russian companies until the end of the military conflict in...
-
The unique Slovak will be presented at the International Engineering Fair in Nitra
- 11.03.2022
- Services
- MSV Nitra
- Exhibitions
The exhibition halls of the Agrokomplex exhibition center in Nitra will be filled with news from the world of plastics, machines, welding, metallurgy, automation and mechanization on 24-27 May. Professional and lay visitors can also look forward to the presentation of a unique Slovak - hydrogen...
-
The popular Motorcycle and Boat Show exhibitions are returning to Incheba in Bratislava
- 09.03.2022
- Services
- Exhibitions
From March 10 to 13, visitors to the Motorcycle and Boat Show will be introduced not only to motorcycles, but also tricycles, quad bikes, scooters and electric scooters, which will complement motorcycle accessories, including clothing, footwear and services. At the same time, there will be a...
-
MSV Brno 2022 will present new directions in the development of industrial technologies
- 07.03.2022
- Services
- MSV Brno
- Exhibitions
The 63rd International Engineering Fair, which will take place in Brno on 4-7 October, will offer companies the opportunity to present innovative industrial technologies and establish new business relationships. October 2022. Specialized trade fairs IMT, PLASTEX, FOND-EX, WELDING and PROFINTECH...
-
The CRM system will significantly streamline business processes for companies
- 07.02.2022
- Services
- Software for industry
- Cost savings
Not only building but also maintaining business relationships with the customer is one of the main tasks of every company, no matter what product or service it offers. Various CRM systems can be a great help (not only) for salespeople, which usually offers complete management of all existing and...
-
The success of a company depends on a quick response - interview with the managing director of Geis CZ
For the last two years, the whole society has been affected by the effects of the COVID-19 pandemic. We have experienced events we have never been able to imagine before - business closures, production interruptions, bans on free movement and a lack of many types of goods or components in...
-
Plasty Gabriel s.r.o. - Examples of connecting software Cadmould and VARIMOS with other software
By connecting the simulation software Cadmould and VARIMOS with the measuring program VGmetrology, a more detailed, simpler and faster quality control of the plastic part is achieved. The definition of the checked criteria (dimensional tolerance) is performed only once, either directly in the CAD...
-
Automation, digitization or artificial intelligence is becoming a common part of companies
The Fourth Industrial Revolution summarizes the changes that have made and are still streamlining processes in the field of transport, production itself or communication through digital technologies. In addition, current technological trends are also influenced by the coronavirus pandemic, which in...
-
EDU-MaTech: training for companies in the engineering and automotive industries
- 27.12.2021
- Services
- Events
- Automotive
In February 2020, the implementation of an international project entitled "Creating strategic partnerships and preparing advanced lifelong learning courses for companies and clusters with innovation potential in the engineering and automotive industries" (EDU-MaTech)...
-
-
A survey of Industry 4.0 in companies showed that top managers are a barrier
- 20.12.2021
- Services
- Smart factory
- Industry 4.0
In the months August - October, the Association of Intelligent Industry - Industry4UM and the company Trexima Bratislava carried out the 5th annual survey on the level of implementation of Industry 4.0 in industrial enterprises. A survey of a sample of 125 companies confirmed the downward trend in...
-
Legislative changes in the field of packaging materials
- 25.11.2021
- Services
- Packaging
- Plastic packaging
COMMISSION REGULATION (EU) 2020/1245 of 2 September 2020 amending the provisions and correcting Regulation (EU) No 182/2011 entered into force on 23 September 2020. 10/2011 on plastic materials and articles intended to come into contact with...
-
62nd International Engineering Fair in Brno - photo gallery part 2
- 22.11.2021
- Services
- Photo reportage
- MSV Brno
- Exhibitions
The International Engineering Fair in Brno once again showed technologies and phenomena transforming industrial practice - the Internet of Things, robotics, corporate data systems and control using artificial intelligence. In the next part of our report we bring you a photo gallery from Pavilion F...
-
62nd International Engineering Fair in Brno - photo gallery part 1
- 19.11.2021
- Services
- Photo reportage
- MSV Brno
- Exhibitions
After last year's break, the Brno Exhibition Center once again welcomed the largest Central European fair of industrial technologies. MSV 2021 took place on an unusual November date. We bring you a photo gallery from pavilions G1 (machines and equipment for plastics processing), pavilion V...
-
The biggest transformation since industrialization - HANNOVER MESSE 2022
- 15.11.2021
- Services
- HANNOVER
- Exhibitions
Digitalization and sustainability – these are the key topics at HANNOVER MESSE 2022. The world's leading trade show for industrial technology thus promotes more climate protection in business and industry and clearly illustrates how digitalization, automation and regenerative energies can...
Branch Dictionary
