Services - Current News Articles - page 21
Articles on Services. Daily updated information and news from the plastics industry.
-
7 th. exhibition of recycling and waste management PRO EKO
- 20.05.2011
- Services
From 3 to 6 May 2011, in Banská Bystrica conducted exhibition events FOR ARCH - N14. Exhibition Building, FOR EKO - 7 Exhibition of recycling and recovery on for the region - 10 exhibition of regional development and tourism. Exhibition space 5 000 m2, which were presented to 161 exhibitors from...
-
PlasticPortal.eu celebrates second birthday
- 18.05.2011
- Services
In May 2009 there was launched a new portal in Slovakia, to provide comprehensive information from plastics industry in one place. You can find plastics processors, manufacturers and distributors of plastic products and intermediate products, raw material suppliers, machinery, technologies,...
-
The introduction of new practices Polytechnic Secondary School pupils - COP Zlin in plastics and rubber companies - study and work placements for pupi
- 04.05.2011
- Services
The project deals with improving the quality of initial training in the Zlín Region and enables students to acquire practical knowledge and skills and thereby increase their competitiveness and...
-
Autosalón 2011: Priemyselné inovácie - základ budúceho rozvoja regiónu
- 02.05.2011
- Services
During days 12 to 17 April 2011 in Bratislava on Incheba made Autoshow 2011, where the Automotive Cluster - Western Slovakia with its project partners to the Hungarian Chamber of Commerce and Industry in Miskolc BOKIK project presented CBC HU - EN \ "Clusters Without Borders \...
-
PRO EKO- 7.výstava recyklácie a zhodnocovania odpadov
- 27.04.2011
- Services
From 3 to 6 May 2011, the area under the monument Uprising in Banská Bystrica filled with exhibitors from Slovakia and abroad and in the event: r nFor EKO - 7 year of the exhibition waste recycling and recovery r nFor REGION - 10 výstava Regional Development and Tourism r nFor ARCH - 14...
-
Car Show, Slovakia Chemistry 2011, CARplast - Final press release and photo gallery of exhibitions
- 19.04.2011
- Services
On Sunday, he reached the final of the 21st vintage car of Bratislava. During the six days of its existence has led to huge interest journalists and experts - motorists and the general...
-
Engineering veľrh in Nitra 2011-stable base for successful communication professionals
- 13.04.2011
- Services
Nitra International Engineering Fair, which will be held at the Agrokomplex from 24 to 27 5. 2011, the most important not only in Slovakia but also in the countries of Central and Eastern...
-
Begins in late March largest construction fair in Slovakia - CONECO, 29.3. - 2.4. 2011
- 28.03.2011
- Services
International Fair CONECO the end of March and April public again present innovations and challenges one of the most important sectors of our economy. Construction, which went through a few years ago the boom seen in the form of new housing or commercial and business centers, today faces a deep...
-
The best start for your growth - spring industrial fairs in Prague
- 07.03.2011
- Services
We will advise you how to be the best and see where the inspiration in 2011! R nJubilejní 10th year Engineering Fair FOR INDUSTRY spring is the ideal third term to 5 May 2011, venue in the capital city of Prague, 3 days of personal contacts and business...
-
Cadmould ® 3D-F 2K & insert - simulation of the injection process
- 28.02.2011
- Services
Results of a new software development CADMOULD ®, made under the EU project "PRO4PLAST", was released in 2010 for all those interested in the analysis of injection molding, who often design and construct a plastic molded parts and injection mold process...
-
Record Aqua-therm Nitra 2011 - 10% more exhibitors, about 852 more visitors a live tiger
- 21.02.2011
- Services
Aqua-therm Nitra this year to further strengthen its position as the largest events in the field of technical equipment of buildings in Slovakia. The center, Nitra, presented their news 141 exhibitors, an increase of nearly ten percent more than last...
-
Project meeting AUTOCLUSTERS
- 31.01.2011
- Services
Project team members AUTOCLUSTERS the end of last year attended the 5th meeting of project partners, aimed at creating and building the first cooperative and innovative network for the automotive industry in South East...
-
FOR ECO - 7th annual ecological exhibition biggest in Slovakia
- 02.01.2011
- Services
Exhibition PRO ECO will take place May 3-6,2011 in Banska Bystrica, together with the exhibition FOR ARCH 14th Exhibition Building, 10th FOR THE REGION. Event is supervised by Ministry for the Environment and Recycling...
-
-
The introduction of new practices Polytechnic Secondary School pupils - COP Zlin in plastics and rubber companies
- 20.12.2010
- Services
The project deals with improving the quality of initial training in the Zlín Region and enables students to acquire practical knowledge and skills and thereby increase their competitiveness and employability. The target group is primarily all pupils study field processing of leather, plastics and...
-
Message from K 2010
- 05.11.2010
- Services
Strong impetus for further growth of the plastics and rubber, extremely strong willingness to invest among more than 220,000 visitors...
-
Final press release from Fair VIENNA-TEC 2010 - Industry and crafts are ready to invest
- 02.11.2010
- Services
The International Industrial Trade Fair VIENNA-TEC is the biggest event in Austria * 6 prestigious trade fairs under one roof * more than 570 direct exhibitors presented technical news and trends revealed in the future * fair was attended by 30,280 professionals * 17.5% of visitors came from abroad...
-
RubPlast EXPO - the most dynamic sector
- 25.10.2010
- Services
After the success of last year's trade fair industry and rubber industry, plastics RubPlast EXPO Expo Silesia continue in preparation for the third edition, which will be held from 17th to 19th November. Already, the state of applications exceeds the number of exhibitors last year's event and...
-
Innovation Compass shows the direct path of the highlights of the fair K 2010 Düsseldorf
- 22.10.2010
- Services
Fair K 2010 by the widest and most comprehensive range of products and innovations. In fact it can not overtake any other trade fair plastics and rubber industry. With a high degree of internationality of three thousands of exhibitors, who will be the 27th time October to 3 November present at the...
-
Analysis of injection plastic parts with metal inserts and analysis of two chamber injection
- 21.10.2010
- Services
Simulation analysis focused on injection molding helps to improve the quality of plastic products and manufacturing tools. Simulations also means shortening the preparation of new products to market and thus the final reduction of financial costs associated with new projects. Simulation programs...
-
PlasticForum 2010
- 08.10.2010
- Services
Plasticforum 2010, prepared by SLOVAK PLASTIC CLUSTER with NADSME to promote cooperation, increase competitiveness and economic growth in the Slovak and Hungarian firms have met with very positive feedback from workshop...
-
Preliminary Final Report and Photo of MSV Brno 2010
- 20.09.2010
- Services
International engineering trade fair presentations byl AGAIN largest industrial space technologies in Central Europe. Its scope, the large number of business dealings led many now directly on the spot confirmed the contract closed nastupující reviving the economy. Exposure exhibitors occupying All...
-
Radiation síťování - a recipe for improving the tribological properties of injection molding parts polymerních
- 07.09.2010
- Services
- Radiation technologies
Areas with many shops nahrazují others plastics materials such as metals, are almost all kinds of drives. Plastic is a material suitable for production of gear wheels, bearing bushes or of other sliding elements. Lightweight and Cheap to manufacture parts located in office machines, in automobilech...
-
Moldex3D/eXplorer - gateway to the world of 3D simulation of plastics injection molding
- 05.09.2010
- Services
Creep cavities form in the melt is a complicated process. Especially in parts of proměnnými thickness walls ztěží odhadnout there is possible to just one by the mold cavity where a report accompanied by a defect in mohou vzniknout dilemma. Design of plastic parts are today still složitější and...
-
Fair VIENNA-TEC 2010 - waiting for the Slovak and Czech visitors in Vienna from 12 15 October 2010
- 24.08.2010
- Services
In the near future will open doors to international industrial exhibition VIENNA-TEC, which takes place every two years and offers the opportunity to see in one place under one roof six specialized industrial trade fairs AUTOMATION AUSTRIA (automation), ENERGY-TEC (energy), IE ( industrial...
-
Flexible planning and production control as a strategy for Growth during Economic Crisis
- 19.08.2010
- Services
Every business manager výrobního surely knows that his products Competitiveness depends on ukazatelích doubt, as is productivity, quality of production or level of services provided, ideal Already at the very beginning of choosing the appropriate concept of production...
-
The pilot training program for injection molding adjuster - the first part of testing successfully completed
- 11.08.2010
- Services
The project Improvement of Vocational Education in Field of Injection Moulding (EDMOULD) - Improvement of vocational training in the field of injection molding - LLP/LDV/TOI/2009/SK/93100534) Lifelong Learning Programme, Leonardo da vineyard - Transfer of...
-
MSV 2010 Together with Technology Fairs
- 29.07.2010
- Services
Souběžně the 52nd international engineering and seventh veletrhem International veletrhem cutting and shaping machines for IMT Brnenský Exhibition pass off even more next three specialized technological fairs: 13 international foundry trade fair FOND-EX 20 International Welding Engineering Fair and...
-
Willmark chosen the way of quality
- 19.07.2010
- Services
One of the most visible effects of the crisis with which we meet today in business is the pressure on...
-
VIENNA-TEC 2010, 12th-15th October 2010 opened the door. Vienna awaits you ...
- 04.06.2010
- Services
Already well known in Slovakia, the Czech Republic and Hungary, Austria for a unique exhibition VIENNA-TEC will be back after two years to act in a modern exhibition center Messe Wien Vienna, near the Prater. This fair is a leader in Austria, host a six trade fairs under one roof AUTOMATION AUSTRIA...
Branch Dictionary
