Services - Current News Articles - page 10
Articles on Services. Daily updated information and news from the plastics industry.
-
MSV 2019 will focus on digitization of manufacturing
61th International Engineering Fair (MSV) in Brno will once again showcase the latest news and trends in industrial technologies, the phenomenon of a digital factory and will open a debate on circular economy. MSV 2019 will be held from 7th to 11th October at the Brno Exhibition Centre,...
-
New REACH registration of polymers
European chemicals legislation REACH has entered the next phase after the registration of substances above 1 tonne in 2018. In the case of plastics, monomers were addressed. Reviewing the effectiveness of REACH (REFIT) has made a recommendation to prepare a polymer registration...
-
The dynamics of the world economy is slowing down - global development consumption machine tools in 2019
- 16.07.2019
- Services
- CNC technologie
- Research
According to the UK research institute Oxford Economics, the world economy is set to grow by 2.5% in early 2019. Investments and industrial production are growing by 2.4% each. Machine tool consumption is forecast at the beginning of the year, with a slight plus of 2.3% below. EMO Hannover 2019...
-
The Slovak plastic cluster celebrated the ten-year anniversary of its operation at the General Assembly
At the Mikado Hotel in Nitra, 33 participants from 22 member firms of the Slovak Plastic Cluster (SPK) met to personally and commercially acquaint themselves with the General Assembly of the SPK (SPK) to vote for the budget, the 2019 activity plan and the Annual Report year...
-
10th year conference of FORMS and PLASTICS 2019
The tenth year is organized by JAN SVOBODA s.r.o. in cooperation with Ľubomír Zeman, a professional conference focused on plastic injection. The aim of the conference is to provide information across the production chain so that companies can compete in the global...
-
K 2019 Düsseldorf - new technology as an innovation engine
More than 3,000 plastic and rubber companies will present products and solutions for productive and responsible today, tomorrow and after tomorrow. At a press conference in Budapest, the organizers of the fair met directly from Düsseldorf - Thorsten Kühmann Director of the German VDMA Association...
-
Plastpol Kielce 2019 - Photo gallery
- 18.06.2019
- Services
- Photo reportage
- PLASTPOL
- Exhibitions
The balance of this year's international plastics and rubber trade fair Plastpol 2019 was record-breaking and impressive, with 910 companies from 42 countries taking part in 7 exhibition halls. The exhibition was the biggest in its history so far. The trade scope of the fair included technologies,...
-
SOVA Digital: The first R&D meeting of Slovakia's leaders
- 11.06.2019
- Services
- Industry 4.0
R&D (Research & Development) Leaders of R&D Centers of Slovak Industrial Companies gathered for the first joint meeting to find a space for mutual cooperation to improve industrial R&D. The aim of the event was to create cooperation of R&D leaders, which has the ambition to contribute to the...
-
International Engineering Fair 2019 in Nitra - awards and photo gallery
- 06.06.2019
- Services
- MSV Nitra
- Exhibitions
The International Engineering Fair in Nitra was held at the Agrokomplex Exhibition Center on May 21 - 24, 2019 and again prepared for visitors a number of expositions with the latest solutions and technologies. In addition to engineering production, products and innovations from other areas of...
-
Become an expert in plastic processing, secure your future profession
- 03.06.2019
- Services
If you are taught as a plastician, it will not happen that you will not have a job after graduation. New disciplines that you can report to today have already arisen from the initiative of manufacturing companies struggling with a shortage of skilled workers. At the instigation of plastics...
-
IPA Slovakia Seminar: Let's learn how to produce quality products!
We currently have enough. Plenty of everything. Quality, but also poor quality products, their various variants, imitations or even harmful products, environmentally harmful. You really have something to choose from. But how does a customer find that it is a product of good...
-
Interconnected devices change the manufacturing industry
The use of IoT in industry is one of the most important steps on the road to Industry 4.0. Industrial IoT significantly increases the efficiency and quality of production and minimizes unnecessary costs. Experts at the next Industry4UM meeting discussed the collection, analysis, distribution of...
-
The 26th International Engineering Fair in Nitra will attract new exhibitors
At the Agrokomplex will take place from 21 to 24 May 2019 26th International Engineering Fair in Nitra. The fair has become the most important event in Slovakia in this...
-
The VELOX CMS plastic injection workshop brought interesting lectures
- 09.05.2019
- Services
- Events
- Cost savings
VELOX CMS would like to inform you that on April 9 - 10, 2019 in Hustopeče near Brno, the sixteenth training seminar organized by VELOX CMS s.r.o. in cooperation with Incoe International Europe. The seminar, which featured seven speakers with contributions on "defect prevention, problem solving,...
-
Strength, design and speed have come together at the prestigious Auto Show 2019 in Bratislava
- 03.05.2019
- Services
- Events
- Autosalon
- Photo reportage
After a year, the attention of cars enthusiasts will once again focus on the capital city. Central Europe's most awaited car event is set to meet the expectations of all car fans about the exceptional automotive experience. The Bratislava Motor Show brings not only a lot of interesting news. This...
-
Slovakia and its readiness for global trends in the automotive industry
- 25.04.2019
- Services
- Events
- Automotive
In the near future, the automotive industry is expected to see significant changes, which will also have a strong impact on Slovak companies. In the coming years, we will see an increase in the production of cars for alternative propulsion, and electric cars on the hydrogen...
-
A new research center for drive by wire is being set up at FEL ČVUT
Top experts, financial investments and big ambitions are behind the newly established Smart Driving Solutions Research Center at the Department of Control Engineering of the Faculty of Electrical Engineering, ČVUT. A team of 13th scientists, led by Tomáš Haniš, aim to change the thinking and...
-
Technology Days 2019: Heading for the future with Arburg on the Road to Digitalisation
The Arburg Technology Days have been around for 20 years now. Between 1999 and 2019, more than 93,000 invited guests from all over the world attended the highly regarded industry event. Between 13 and 16 March 2019, more than 6,000 visitors from 54 countries joined the event. Around 660 actively...
-
Cimatron CAD / CAM solution in practice
- 25.03.2019
- Services
- CAD/CAM
- Software for industry
Na tému NC programovanie a NC programovanie s pomocou CAM alebo CAD / CAM softvéru toho bolo napísaného už veľmi veľa. Dnes sa ale skúsme pozrieť na celú problematiku z iného...
-
Software from SOFTIP, a.s. will help with preparation of manufacturing.
- 15.03.2019
- Services
- Software for industry
More than ever, a quick response to market changes, new orders, or non-standard customer demands makes it a competitive edge. Precisely, what the SOFTIP MONACO information system is all about. A tool that makes the manufacturing process transparent, fast, and largely...
-
Kia again won the iF Design Awards
- 12.03.2019
- Services
- Automotive
Number three became a happy number of Kia. After introducing the new, third generation Kia Ceed, currently sold in Europe in three different body styles, each of the three newcomers received the iF Design Award. This three-fold triumph in the world-renowned design competition is also the third...
-
HANNOVER MESSE 2019: Industry 4.0 hand in hand with Artificial Intelligence (UI)
- 08.03.2019
- Services
- Industry 4.0
- Exhibitions
The HANNOVER MESSE fair is moving digital transformation of the industry and the energy economy forward. Every year means the next step towards the future. For the year 2019, the title of the main topic is "Integrated Industry - Industrial Intelligence". The meaning is the digital networking of...
-
ai magazine a ATP journal stores invite you to II. the annual conference of Robotics in the production practice of small and medium-sized enterprises
- 04.03.2019
- Services
- Events
- Automation
- Robotics
LEADER press, s.r.o. and HMH, s.r.o. organizing - through their journals and magazine and ATP Journal - also the second edition the successful Robotics Conference in the Manufacturing Practice of Small and Medium...
-
CAD / CAM Cimatron solution offers both efficiency and user freedom
- 21.02.2019
- Services
- CAD/CAM
- Software for industry
The manufacture of the electrode starts with the construction of the electrode model and the preparation of the NC code for its machining. For this input part of the manufacturing process, it is crucial to use a high-quality CAD / CAM software solution that saves the time of the designer and...
-
IPA Slovakia, s.r.o.: Correlation Industry 4.0 and Lean Management Tools
- 07.02.2019
- Services
- Industry 4.0
At present, organizations are trying to exploit the principles of lean manufacturing that focus on value-adding activities, constantly improving, and removing all forms of waste from production and administrative processes. In the field of production, a paradigm called Industry 4.0 or the fourth...
-
Ivo retrofits s.r.o.revamps and reconstructs injection molding
Ivo retrofits s.r.o. is engaged in the renovation and reconstruction of injection moulding and compression presses. Thanks to its independence and flexibility, the company offers a wide range of services related to plastic and rubber moulding...
-
Digital HR is for business necessity, announces SOFTIP, a.s.
- 23.01.2019
- Services
- Interview
- Software for industry
We spoke to a member of SOFTIP board of directors and CFO, Martin Vlčko about the current trends in information systems for HR management and the experience with their management at SOFTIP. He is responsible for managing the central support services from the economy and the economic administration...
-
Overturned Class at University? A visionary teacher from the CTU FEL, instead of a lecture, is a YouTube video
- 21.01.2019
- Services
Prof. Zdeněk Hurák from the Department of Control Engineering, FEL ČVUT, has been experimenting for several years with the teaching of technical subjects in the so-called " inverted class. Students will see an interpretation of animated videos on YouTube at home, and they will only solve examples...
-
Quality assurance non-destructive use of computer tomography at the ZEISS Metrological Center in Trnava
- 15.01.2019
- Services
- Quality control
- Plastic packaging
Quality assurance is achieved by control and measurements of products. To check the products many types of measuring technology can be used. One of them is computer tomography. Carl Zeiss Slovakia, p. r. o., Industrial Measurement Division, offers training and customized measurements using computer...
-
Vienna Autoshow 2019 - photo gallery of the largest car show in the region
- 14.01.2019
- Services
- Autosalon
- Photo reportage
- Exhibitions
The Vienna Autoshow was a 4-day event at the Reed Messe exhibition in Vienna. Visitors could enjoy the automobile models of many automobile brands, including interesting...
Branch Dictionary
