Services - Current News Articles - page 9
Articles on Services. Daily updated information and news from the plastics industry.
-
The Regional Training Center will be built in Nitra and will also be equipped with robots
- 14.01.2020
- Services
Private secondary technical school Polytechnic DSA in Nitra will have a new Regional Training Center for almost 7 million. euros. The main hall will be available to school students next school year, with additional classrooms to be added over the next two...
-
Suppliers for Car of the Year 2020 in the Czech Republic
- 13.01.2020
- Services
- Automotive
- Awards
The Automotive Industry Association (AutoSAP) represents companies that, within the 26th edition of the 2020 car survey in the Czech Republic, have acquired the right to use the prestigious name "Supplier for the car of the year 2020 in the Czech Republic". At the same time, the parts of domestic...
-
SOFTIP joined the Paris challenge of trust and security in cyberspace
- 07.01.2020
- Services
- Smart factory
SOFTIP has joined the Paris Call for international cooperation to strengthen protection and trust in the digital world. The Paris challenge is the world's largest stakeholder group that has come together to promote security in the digital space and to face new cyber threats to which we are...
-
Production of motor vehicles is catching up last year
- 30.12.2019
- Services
- Automotive
The Automotive Industry Association provides a traditional overview of vehicle production and sales for the period from 1 January to 30 November 2019. The slight decrease in total motor vehicle production between January and the end of November confirmed the trend this...
-
Expected changes in the automotive industry the main theme of the AutoSAP General Meeting
- 19.12.2019
- Services
- Electromobility
In the traditional pre-Christmas term, a meeting of top representatives of the member companies of the Automotive Industry Association (AutoSAP) took place in Floret, Prùhonice. The 91st General Meeting confirmed the co-opt of the Board of Directors of AutoSAP Robert Kiml, General Manager for...
-
17th Seminar - Defect Prevention, Problem Solving, Cost Savings and Innovation for IMCD Czech Republic s.r.o. is popular
Company IMCD Slovakia s.r.o. would like to inform you that on November 13-13, 2019, a seventeen educational seminar was successfully held near the Brno...
-
CEE Automotive Supply Chain 2019: Let’s think strategy
- 26.11.2019
- Services
- Events
- Automotive
The largest conference of automotive suppliers in the Czech and Slovak Republics was held in Olomouc on 12 and 13 November. Over 450 participants from 18 countries worldwide did not miss the opportunity to meet, discuss and hold business talks at the NH Collection Congress Hotel in Olomouc, Czech...
-
The share of companies applying Industry 4.0 reached 40%. Changes are beginning to override corporate culture settings
- 14.11.2019
- Services
- Industry 4.0
The Intelligent Industry Association - Industry4UM presented the results of the third annual survey on the level of penetration of Industry 4.0 into Slovak companies. Three-year data collection confirmed a continuously increasing share of companies that started with Industry 4.0. Today, 40% of...
-
SOFTIP is the first Microsoft Gold Security certified company
- 13.11.2019
- Services
- Awards
- Software for industry
SOFTIP became the first company in the territory of the former Czecho-Slovakia to obtain the Microsoft Partner Gold Security certificate. In four months, he has achieved the highest possible level in this new competence of Microsoft, which confirms his expertise, ability and rich experience in...
-
K 2019: Raw materials, additives, semi-finished and reinforced plastics, press conferences, large photo gallery, halls 5-8
New developments by the raw material produces are responding to current application trends. The requirements are changing in the light of the development of autonomous electric cars and the different mobility infrastructure. Products for digitalisation and energy and resource efficiency were also...
-
K 2019: Machinery and equipment, large photo gallery, halls 1-4, 9-17
- 05.11.2019
- Services
- Photo reportage
- K Show
- Peripherals
Circular economy and digitalisation are key issues for machine manufacturers. Injection molding manufacturers are now concentrating on machine concepts for processing bioplastic or recyclates are being optimised the energy efficiency of machines is increased and rejects minimised in order to...
-
Pavel Alexy: Someone has to pay the price difference between ecological and conventional plastics
- 04.11.2019
- Services
- Bioplastics
- Interview
If we replace plastic packaging with glass, metal or wood, for example, the volume of landfills would increase by about 260%. Professor Pavel Alexy specializes in research and development of biological plastics from renewable sources. He talks about the future of plastics and plastic waste, their...
-
K 2019 gives a Clear Signal for Responsible Handling of Plastics
- 29.10.2019
- Services
- Circular economy
- Exhibitions
K, the leading global trade fair for the plastics and rubber industry, has drawn to a close after eight days. The 3,330 exhibitors from 63 nations proved impressively: plastics continue to be an innovative, indispensable, future-oriented material. But they also unanimously underscored the necessity...
-
The 61st International Engineering Fair in Brno offer the future of industry, Photogallery
- 25.10.2019
- Services
- Photo reportage
- MSV Brno
- Exhibitions
Robots, the Internet of Things, virtual simulation systems and artificial intelligence - this year's MSV confirmed the massive advent of digital technology into industrial practice. All covered areas of the exhibition were sold out and the largest Central European fair lived in...
-
3. Central European Plastics Meeting and Photo Gallery
- 23.10.2019
- Services
- Events
- Photo reportage
The 3rd year of the successful plastic conference Central European Plastic Meeting was held in Šamorín in the hotel X-bionic sphere. The annual forum for actors in the plastics industry in Central and Eastern Europe is focused on fast and efficient business, establishing partnerships and gaining...
-
Special Show Plastics shape the future at K 2019 in Düsseldorf
K 2019, The World’s No. 1 Trade Fair for Plastics and Rubber, held in Düsseldorf from 16 to 23 October 2019, is the performance barometer and global innovations marketplace for the entire industry. As part of its programme of side events K in Düsseldorf also extends an invitation to debates on...
-
UNIPLAST BRNO Conference - Molds, Machines and Materials
- 07.10.2019
- Services
- Photo reportage
Between 17th and 18th September 2019, a conference was held on the topic of Rationalization of the production of plastic parts in the pleasant environment of the Hotel Tri Vìžièky near Jihlava. The international conference, the main organizer of which was UNIPLAST BRNO, was attended by a number of...
-
The Digital Factory 2.0 exhibition will show the digital transformation of the industry in live streaming
Progressive digitalisation in all areas of human activity brings ever more new, more advanced yet realistic production models. In fact, a large part of the public, and often a part of the professional community, do not know what to really imagine under the name Industry 4.0. Therefore, on the...
-
Exhibition Committee Report K 2019: Technology and Trends
- 01.10.2019
- Services
- K Show
- Exhibitions
More than ever before, plastics have been discussed in the media. Visible marine pollution has given plastics a widespread attention of the world's population, but the benefits of plastic for well-being and health, water, food and energy supply, as well as increasing mobility and intensified...
-
Miroslav Kollár: We want to be a project partner for our customers, not just a supplier
- 30.09.2019
- Services
- Interview
- Software for industry
SimulPlast, s.r.o. is a technical-consulting company for manufacturers, developers, designers and users of injection-molded plastic parts. It is the exclusive dealer of Moldex3D CAE software for the analysis and optimization of plastic injection. In an exclusive interview, Mr. Miroslav Kollár told...
-
The first International Engineering Fair began 60 years ago. To date, a single year has not been omitted
- 24.09.2019
- Services
- MSV Brno
- Exhibitions
On September 6, 1959, the first year of the International Engineering Fair was launched at the Brno Exhibition Center. After 60 years, MSV is the most important Central European fair of its kind with attendance of over 80,000 people and more than 16 hundred exhibiting companies. This year it takes...
-
K 2019 Düsseldorf: The World of Pioneers
- 20.09.2019
- Services
- K Show
- Exhibitions
The K 2019 - the world's leading plastics and rubber fair - has long been sold out. More than 3,200 exhibitors from over 60 countries will participate. Suppliers from Europe, in particular Germany, Austria, Switzerland, France and Turkey, and non-European countries, mainly from the USA, are...
-
Interview with Schier Technik Slovakia, s.r.o. director Ing. Radoslav Zavøel about news and plans of the company
- 19.09.2019
- Services
- 3D technology
- Software for industry
Company Schier Technik Slovakia s.r.o. was the first official seller of SOLIDWORKS 3D CAD system and related applications in Slovakia. The company boasts a large number of satisfied customers, as well as the highest levels of certification from DS SOLIDWORKS Corp., as well as a reseller with the...
-
MSV 2019 will be a fair of technology and innovation for the industry of the future
The 60th International Engineering Fair will once again show visitors the latest innovations and trends in industrial technology. From 7 to 11 October 2019, more than 1,600 exhibitors from dozens of countries around the world will be exhibiting in Brno. In addition, an interactive exhibition...
-
EMO Hannover 2019 - network infrastructure changes industrial production
- 13.09.2019
- Services
- HANNOVER
- Industry 4.0
- Exhibitions
EMO will be held from 16 to 21 September 2019 in Hannover, Germany. The world's leading metalworking fair will once again be held in Germany, the world's third largest machine tool market. „In Hannover, all important manufacturers of manufacturing technology present themselves at the largest and...
-
Who is behind Expect the Unexpected and what do these meetings bring?
Each of us wants to understand the future ahead of us in business or personal or social life. The most read periodicals write how many of the existing occupations are lost and how many people lose their jobs. It raises fear naturally. New and more demanding conditions arise for people at work, for...
-
At the MSV 2019, Digital Factory 2.0 will be unveiled like never before
Progressive digitalisation in all areas of human activity brings ever more new, more advanced yet realistic production models. In fact, a large part of the public, and often a part of the professional community, do not know what to really imagine under the name Industry 4.0. Therefore, the...
-
When saving money means to remake or challenge one technician
- 05.08.2019
- Services
- Software for industry
For several years now Mr. Szczecin from technology-support s.r.o. moves as an application technician and trainer in companies and has noticed an interesting thing. When a milling cutter comes to a supervisor or a business owner that he needs a new tool because the old one is no longer working, a...
-
K 2019 Exhibition Committee Report: Market and economy
- 02.08.2019
- Services
- K Show
- Exhibitions
Since 1952, K Düsseldorf has held a privileged position among all the specialized trade fairs of plastics and rubber. No other event can see the worldwide success of polymeric materials so clearly, tangibly and transparently. The 21st edition of the trade fair also demonstrates the continued growth...
Latest Classifieds
For Sale: Regranulates PP, PA, PBT - 175 tonnes
15.11.2024 | ID: 202420074
Top AdvertFor Sale: PVC window regrind, white, light gray, mix
18.12.2024 | ID: 202420236
For Sale: Plastic regrind and regranulates.
18.12.2024 | ID: 202420235
For Sale: 2x press SEM P12-12 II
18.12.2024 | ID: 202420234
For Sale: BAYBLEND FR3010 IF red
16.12.2024 | ID: 202420232
For Sale: Granules ABS, PA6,PP
16.12.2024 | ID: 202420231
To purchase: Fumigated pallets 120*80
16.12.2024 | ID: 202420230
To purchase: Fumigated pallets 120*80
16.12.2024 | ID: 202420230
To purchase: PA 6/66 GF 30 regrind
16.12.2024 | ID: 202420229
To purchase: Plastic scrap from production
16.12.2024 | ID: 202420222
To purchase: LDPE film in bales
09.12.2024 | ID: 202420201
To purchase: Wanted: PE-PP dirty granulates from ground
09.12.2024 | ID: 202420194
To purchase: Plastic scrap from production
09.12.2024 | ID: 202420190
To purchase: PA 6/66 GF 30 regrind
09.12.2024 | ID: 202420183
For Sale: Regranulates PP, PA, PBT - 175 tonnes
15.11.2024 | ID: 202420074
Top AdvertFor Sale: PVC window regrind, white, light gray, mix
18.12.2024 | ID: 202420236
For Sale: Plastic regrind and regranulates.
18.12.2024 | ID: 202420235
For Sale: 2x press SEM P12-12 II
18.12.2024 | ID: 202420234
For Sale: BAYBLEND FR3010 IF red
16.12.2024 | ID: 202420232
For Sale: Granules ABS, PA6,PP
16.12.2024 | ID: 202420231
-
16.12.2024 | ID: 202420228
Upcoming Events
07.01.2025 - 09.01.2025 | Düsseldorf
World Future Energy Summit 2025
14.01.2025 - 16.01.2025 | Abu Dhabi
22.01.2025 - 23.01.2025 | Paríž
22.01.2025 - 24.01.2025 | Tokyo
04.02.2025 - 06.02.2025 | Anaheim
04.02.2025 - 06.02.2025 | Varšava
11.02.2025 - 13.02.2025 | Monterrey
International Plastic Industry IPF 2025
12.02.2025 - 01.01.1970 | Dhaka
18.02.2025 - 19.02.2025 | Nuremberg
07.01.2025
World Future Energy Summit 2025
14.01.2025
22.01.2025
22.01.2025
04.02.2025
16.01.2025
Polykemi invites you to Materialsmart webinar for Czech Republic and Slovakia
16.01.2025
ING 4.0 training programme for digital skills development: Robotics and Advanced Robotics
17.01.2025
ING 4.0 training programme for digital skills development: Logistics systems and automated logistics
18.02.2025
20.02.2025
Job offers
Assistant - DALGA GROUP s.r.o.
18.12.2024
Warehouse worker - forklift experience required. ENVI-RECYCLING PLAST, s. r. o.
09.12.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
20.11.2024
Obchodno-technický zástupca spoloènosti LIFOCOLOR, s.r.o.
11.11.2024
Commercial - technical representative, western Slovakia - Wermaly s.r.o.
05.11.2024
Production operator - inspection of plastic products - ESOX-PLAST s.r.o.
30.10.2024
Logistics dispatcher for plastic moldings - JASPLASTIK-SK spol. s.r.o.
30.10.2024
Sorter - adjuster of injection moldings - Plasted spol.s r.o.
14.10.2024
Adjuster - AIS Automotive Interior Systems Slovakia s.r.o.
11.10.2024