Machinery & Equipment - Current News Articles - page 23
Articles on Machinery & Equipment. Daily updated information and news from the plastics industry.
-
Konica Minolta Spectrophotometer CM-5 from Anamet Ltd.
- 07.01.2013
- Machinery & Equipment
- Quality control
Brand new spectrophotometer with comfortable upper sensing contains a very wide range of applications. Spektorfotometr CM - 5 has been developed for a wide range of applications, particularly suitable for a color measurement in the food, chemical, cosmetic and pharmaceutical...
-
Measurable and demonstrable cost reduction = Interflon
- 24.12.2012
- Machinery & Equipment
The trend of reduction in production costs, increase productivity and increase the competitiveness of the market is more and more demand periods and is valid for plastics...
-
COMPUPLAST introduce a 5-layer co-extrusion line for tubular film blowing from Labtech Engineering Co., Ltd..
- 03.12.2012
- Machinery & Equipment
- Extrusion
This 5-layer co-extrusion line for tubular film blowing consists of 5 one extruders Ø30 mm with a ratio L / D 30 All extruders are equipped with gravimetric dosing zabazpečujícím precise control of the thickness of the individual...
-
Maximum cooling yield with minimum energy consumption - Piovan Digitemp Thermorefrigerators
- 29.11.2012
- Machinery & Equipment
With a range of three models available in the single or dual circuit versions, Piovan Digitemp Thermorefrigerators are a new solution of water-cooled...
-
Always one step ahead - Arburg company is now also certified according to ISO 50001
- 22.11.2012
- Machinery & Equipment
This year 2012 the company faced a major challenge Arburg, which managed to perfect: a new certification audit by certification body TÜV tested the compliance management system with the requirements of ISO 50001 with the requirements of ISO 9001 and 14001. This success is an innovative company in...
-
MuCell technology for large parts of the company KraussMaffei, here represented by Kuboušek, Ltd.
- 12.11.2012
- Machinery & Equipment
KraussMaffei and its partners focus on MuCell technology for large parts - Largest MuCell injection system in the world successfully started operation in the company...
-
KUBOUŠEK a novelty KrausMaffei - GX Series - a new dimension of injection molding
- 30.10.2012
- Machinery & Equipment
More efficient and better plastics, which brings even higher quality-pressed indeed an ambitious goal! Based on years of experience, hundreds of hours of innovative developments, not least thanks to the abilities of our engineers, who received requests for its customers KraussMaffei, we were able...
-
The Hotset Sk Company introducing: Fluke thermal imagers
- 25.10.2012
- Machinery & Equipment
Fluke thermal imagers can detect radiometric infrared images using IR-Fusion ®. Thermal imaging is often referred to as the first line of defense in preventive maintenance or reconstruction of buildings and...
-
URA module - News from the International Engineering Fair in Brno awarded honorable mention for the best exhibit innovation in industrial automation
- 23.10.2012
- Machinery & Equipment
Common operational changes in the production schedule, reducing production batch, continuous reduction of production costs while complying with quality requirements of the new automatic production - either by the company's management or customer ... daily tasks of production manager. How to face to...
-
The perfect coating system for pipe constractors
- 16.10.2012
- Machinery & Equipment
PP & PP Flame Spray Coatings Of Pipe Bends, Field Joints and for Repair Work on Pipes in Flame Spray Coatings. High performance and Veratility in a compact...
-
Wittmann Battenfeld is expanding its production capacity at its plant in Kottingbrunn
Based on the persistent sound of orders and particularly strong demand for the new series of large stojích MacroPower Wittmann Battenfeld has decided to expand in 2012, its production...
-
Greiner and Piovan: joining forces on a project to implement an energy-saving free cooling system
- 08.10.2012
- Machinery & Equipment
Today, every industrial sector expects technology and raw material suppliers to offer first-rate skills, efficiency and services in order to become successful on the global market. The plastic packaging and technical component moulding sector is no different, and a fitting example of an industry...
-
KVT-Koenig Ltd. is NEOSPEED rivets ™ system for automated systems with reservoir
- 17.09.2012
- Machinery & Equipment
This system of blind rivets for automated systems using proven technology of reusable...
-
News media in the maintenance of injection molds from Chem Trend and products for production and maintenance of machinery and equipment OKS
- 14.09.2012
- Machinery & Equipment
Lusin ® cleaners remove plastic residue, oils and waxes of dies and molds. To provide a time-saving production, dimensional precision plastic parts and moldings, flawless surface structure and protect the purity of the equipment inside from the...
-
Compact, space saving locking swivel snap R4 from Southco ®
- 05.09.2012
- Machinery & Equipment
The Swiss company Bruce SWISS AG, Zurich Airport has developed with the use of fasteners with locking R4 manufactured by Southco ® new security...
-
A journey through time into the future of injection moulding - 2,700 guests attend ENGEL Symposium 2012
- 29.08.2012
- Machinery & Equipment
The ENGEL Symposium 2012 was a full house experience in the truest sense of the word. 2,700 guests from 35 countries - more than ever before - experienced ENGEL AUSTRIA's premium system solution competency and innovative drive at first hand on 13 and 14 June...
-
Unique technological scope of GF AgieCharmilles
- 22.08.2012
- Machinery & Equipment
More than 200-year history of Swiss industrial corporation Georg Fischer neustálosť impressively illustrates the change that the company had to face in order to remain successful in the long run. Overcome a period of significant change and often painful, always with a commitment to restore the...
-
Wittmann introduced innovative robots
- 10.08.2012
- Machinery & Equipment
- Robotics
In the first half of this year were introduced innovative robots W8xx series, offering customers improved performance, greater comfort, a number of new features and all for the price of previous models W7xx series. In the near future counts with other innovations. These new robots play an important...
-
KraussMaffei injection molding machines range AX from KUBOUŠEK Company Ltd.
- 02.07.2012
- Machinery & Equipment
Enter the world of electrical machines - energy efficient and...
-
Hotseat Slovakia sro is a non-contact temperature meter mark optris
- 21.06.2012
- Machinery & Equipment
Hotseat Slovakia sro, exclusive Embassy in contactless temperature meters mark Optra, presents its...
-
BaXx lifting magnet from Selos Company, Ltd.
- 18.06.2012
- Machinery & Equipment
Magnetic systems from Selos products are of permanent magnets, which are mainly used in...
-
Circular magnetic grids to separate fine particles of ferromagnetic bulk material flow from the company Selos
- 24.05.2012
- Machinery & Equipment
Iron is one of the most widely used materials in the industry. On the other hand, the metal particles are undesirable in finished products, intermediate products or raw materials - particularly in food, chemical, plastics, pharmaceuticals as well as in many other...
-
The smallest fully functional unit for tubular film blowing in the world
- 30.03.2012
- Machinery & Equipment
- Extrusion
Labtech Engineering Company in Thailand will be exhibiting at NPE 2012 in Florida, one of the smallest fully funčních line of tubular film blowing in the world of classical horizontal...
-
COMPUPLAST sro Zlín is Labtech Engineering - manufacturer of laboratory equipment for extrusion and blow molding
- 16.03.2012
- Machinery & Equipment
- Extrusion
COMPUPLAST Zlín Company Ltd. designs, manufactures and supplies instruments, equipment and lines for the extrusion of plastics since 1991. At the turn of January and February 2012, the company became the exclusive representative COMPUPLAST Thai Labtech Engineering Company - Manufacturer of...
-
Increased production safety applications metal detectors and separators S + S KUBOUŠEK Ltd.
- 29.02.2012
- Machinery & Equipment
Process safety in the field of plastic industry and optimize operating times of machines are in the vast majority of processing firms increasingly important...
-
Corrections and innovation in electrical equipment of machines by KONEL Ltd.
- 15.02.2012
- Machinery & Equipment
KONEL Company Ltd. for many years successfully carried out one of their activities - repair, renovation and innovation for a wide range of machinery and equipment for plastics...
-
Firma KNP s.r.o. predstavuje nový laserový prístroj SWA-150 určený pre zváranie a naváranie laserom
- 01.02.2012
- Machinery & Equipment
Laserové prístroje sú už nevyhnutnými pomocníkmi najmä v nástrojárňach a lisovniach, pri úpravách a opravách vstrekovacích foriem, foriem pre tlakové liatie a lisovacieho...
-
Breakers plastics company menu PROFING s.r.o. Bratislava spol.
- 27.01.2012
- Machinery & Equipment
PROFING Bratislava spol. s r.o. is the engineering firm offering design and manufacture of machines and mechanical engineering...
-
KUBOUŠEK Ltd. presents: a new solution for separation from MTF Technik
- 25.01.2012
- Machinery & Equipment
Even when tools with hot runner channels and semi classical separation technique has not lost its importance. Depending on the input can be used by a variety of separation bits and separation...
-
Rhytemper from the Temperiertechnik THEY Rhytemper
- 04.01.2012
- Machinery & Equipment
Temperovaci system pro use in the vstřikovaní plastic extruzi and tlakovém,...
.jpg)
Branch Dictionary
