Machinery & Equipment - Current News Articles - page 9
Articles on Machinery & Equipment. Daily updated information and news from the plastics industry.
-
The company PROFING Piešťany advises how to choose the right wire straightener
- 18.09.2020
- Machinery & Equipment
- Peripherals
Wire straightening is a process that goes back to the essence of steel production technology. In short: when the steel cools, various grains (crystals) are formed and various defects at their borders. During wire forming and production, these are transformed differently, and different stresses and...
-
Plastic variable flow regulators type RVPK from the company FORT - PLASTY s.r.o.
When implementing industrial ventilation systems, possible economic savings during the operation of the installed ventilation system are increasingly taken into account. One of the most effective ways to save significantly is to regulate the system properly. The most common control elements include...
-
ant s.r.o. represents electrofusion welding of pipes
- 14.09.2020
- Machinery & Equipment
- Welding of plastics
Electrofusion welding is a method of joining plastic pipes with the help of special fittings (electric fittings), which have a built-in resistance wire. With the help of an electric current from a welding machine for electric fittings, the resistance wire heats up and melts the mass of the fitting...
-
New mobile cleaning laser ROD 1000W from Narran s.r.o.
The biggest novelty of Narran s.r.o. is a new mobile cleaning laser ROD with a power of 1000W for 2020. The laser is equipped with a special fiber resonator, which allows cleaning without damaging the surface and handles a really wide range of unwanted materials from greases and greases through...
-
WITTMANN BATTENFELD presents its highlights digitally
Since FAKUMA 2020 has been postponed to next year due to the health risks arising from the SARS-CoV-2 virus, WITTMANN BATTENFELD has decided to present the exhibits originally planned for the Fakuma and several other interesting applications in the form of product videos, and post them on a...
-
KraussMaffei extends sales cooperation with Luger in Austria and Hungary
KraussMaffei Austria, a national subsidiary of the Munich-based KraussMaffei Group, is extending its sales cooperation for KraussMaffei-brand injection molding machines with the Austrian family-owned company Luger GmbH. The cooperation will start on September 1,...
-
Automatic feeders from PROFING Piešťany spol. s.r.o.
PROFING Piešťany s.r.o. is engaged in the development and production of machines such as: plastic crushers, EPS polystyrene crushers, shredder, knife mills and feeders. The automatic feeder is an effective solution because you can save time, money and work safety when you use it - you no longer...
-
PENTA - servis spol. s r.o. - Sales of packaging technology, custom machines and complete service
- 06.08.2020
- Machinery & Equipment
- Service of machines
It doesn't end with the sale! The company PENTA-servis spol. provide complete customer care, including consulting, training, supply of consumables, warranty and post-warranty...
-
Lightweight construction Arburg: Efficient production of highly durable components with long glass fiber
Big topics in connection with the automotive industry are electromobility and autonomous driving. In addition, the requirements for resource protection and sustainability are constantly increasing. Arburg shows how efficient insertion of fibers into a polymer melt (FDC) can be used efficiently and...
-
Flexible tubular heating element FLEX from the company BAMAS - ELEKTRO spol. s r.o.
- 27.07.2020
- Machinery & Equipment
- Control technology
Robust tubular heating element with excellent heat resistance, which can be shaped freely by hand without special tools in all three dimensions. Manipulation is very easy, you shape it into the desired shape by...
-
LUMOS II - Fully automated FTIR microscope for chemical imaging
LUMOS II is a very easy-to-use stand-alone FTIR imaging microscope with top performance in any measuring mode. Whether you need to measure in transmission, reflection or attenuated full reflection (ATR); LUMOS II is always the right...
-
Systems for removal and transport of plastic granulate for manufacturing companies
- 24.06.2020
- Machinery & Equipment
- Automation
- Peripherals
At present, many manufacturing companies face the problem of labor shortages. This is not the case in the plastics industry either. Therefore, more and more companies are focusing on increasing the degree of automation of production, as well as the efficiency of the use of existing labor. In...
-
The fastest service of strapping and packaging technology from PENTA-servis spol. s r.o.
No more than 30,000 spare parts in stock! In 2019, we performed 2763 service interventions directly at the customer's and 382 workshop repairs. PENTA-servis s.r.o. has been operating on the Czech market for almost 30...
-
Application of 3D metal printing in plastic injection
- 18.06.2020
- Machinery & Equipment
- 3D technology
As one of the main global innovation drivers, voestalpine is leading the way into the new area of Additive Manufacturing. Based on experience and tradition, by offering the whole value chain from the start to finalization and beyond. All in-house and in one...
-
Nordson EFD Helps Medical Manufacturers Meet Growing Demand for COVID-19 Treatment and Diagnostic Devices
- 04.06.2020
- Machinery & Equipment
- Dosing equipment
From ventilator sub-assemblies to diagnostic test kits, Nordson EFD is putting medical manufacturers’ needs first with rapid response and...
-
Is everything styrene? Testing of materials and identification of plastics during recycling using infrared spectroscopy
Recycling plastics is becoming increasingly important - especially since oil on this scale will no longer be the main source of raw material for polymer production as has been the case so far. The Earth's resources and atmosphere are limited. "New" polymers are made, among other things, from...
-
AYES presents smart glasses and augmented reality for industrial companies
- 01.06.2020
- Machinery & Equipment
- Smart factory
- IIoT - industrial internet of things
- Industry 4.0
- Software for industry
Augmented reality has become another trending topic in the industrial environment in recent years. Unlike artificial intelligence, which is based on machine learning and in which machines are intended to replace the human factor in the long term, augmented reality pursues a different goal: to...
-
ADATEX, s.r.o. - Table vs. Industrial SLS 3D Printers
- 29.05.2020
- Machinery & Equipment
- 3D technology
This comparison is directed to the educational sector, which has an impact on a wide selection of 3D technologies. From simple and cheap FDM to state-of-the-art 3D metal printing equipment. The ideal device must be simple, affordable, reliable and easy to...
-
TECRON composite grippers: Lower weight, higher accuracy
- 26.05.2020
- Machinery & Equipment
- Automation
- Manipulators
The use of robotic grippers and manipulators is common in the plastics industry, with an ever-increasing number of applications. They are used not only for removing moldings from the mold, but also for subsequent handling, insertion of parts for the plug and the...
-
Moving and installing machines from ORCCA industry s.r.o.
- 25.05.2020
- Machinery & Equipment
- Service of machines
Orcca industry s.r.o. is engaged in assembly, disassembly, installation, transport and removal of standard and oversized loads, both weight and dimension. These include: complete production lines, single-purpose and multi-purpose machines, robots and robotization centers, injection molding...
-
Laser welding: Solution for solid joints from K.D. Feddersen
- 21.05.2020
- Machinery & Equipment
- Lasers
- Welding of plastics
Laser welding is a process of non-detachable joining, which has been an established method since the mid-1990s. It uses plasticization created as a result of power supply. It provides solid, non-detachable...
-
WITTMANN and FarragTech are now under one roof
- 19.05.2020
- Machinery & Equipment
- Peripherals
The Austrian family group WITTMANN took over the Austrian company FarragTech from Wolfurt. For more than 25 years, FarragTech GmbH has been active in the peripheral segment, focusing on compressed air-based granule...
-
Quality control of plastics from Anamet s.r.o.
- 13.05.2020
- Machinery & Equipment
- Quality control
Are regular deliveries of polymers at the entrance to your production qualitatively identical? Did you receive unknown material? And what is the flow index of these materials? Do you need a quick and easy analysis of polymeric...
-
ENGEL and Haidlmair together against Covid-19: Face masks in record time
- 07.05.2020
- Machinery & Equipment
- Injection molding machines
Together with business partner Haidlmair, ENGEL is committed to improving the supply of face masks worldwide. In record time, mould maker Haidlmair developed and implemented a new mould solution for the production of reusable masks, which is now being used by plastics processing companies...
-
Automation of disinfection is with Sanfog s.r.o. easy
Disinfection is a very important part of daily production in various segments. Not only during these difficult times of the global pandemic, but also during normal operations or production. In this article, we look at how large businesses, retail chains, but also smaller cafes and restaurants can...
-
Size, zeta potential and particle concentration analysis on Zetasizer Ultra
In 2018, Malvern Panalytical introduced a new analyzer for particle size, zeta potential and particle concentration in dispersions - Zetasizer Ultra, which is absolutely unique among devices working on the principle of dynamic and electrophoretic light...
-
FANUC - electric versus hydraulic injection molding
- 09.04.2020
- Machinery & Equipment
- Injection molding machines
Fanuc introduces you to the major differences between fully hydraulic and fully electric injection molding machines. The main and decisive difference between electric and hydraulic injection molding machines is in the way of transformation, number of transformations and energy...
-
Granulating machine for string regranulation lines from CHODOS CHODOV s.r.o.
The company CHODOS CHODOV presents a novelty in its assortment, granulating machine for string regranulation lines, type 031105. The granulation machine is designed for granulation of strings made of polyolefins and thermoformable plastics produced by the extrusion method. The drive of the...
-
Highly versatile plastic crushers from PROFING Piešťany Ltd.
- 26.03.2020
- Machinery & Equipment
- Recycling technologies
PROFING Piešťany has long been engaged in the development and production of machines such as plastic crushers, EPS polystyrene crushers, shredders, knife mills, nut feeders and dedusting equipment. In addition, their portfolio includes technological crushing lines, wire straighteners, special...
-
MCAE Systems introduces a new 3D printer middle class designed for product design
- 25.03.2020
- Machinery & Equipment
- 3D technology
- Prototyping
The new J826™ 3D Printer with seven materials capacity now makes PolyJet™ 3D full-color printing available to smaller businesses. At about half the cost of other PolyJet J8 series printers, it delivers the same exceptional resolution, detail and wide range of PANTONE™ colors. It is ideal for...
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
Upcoming Events
17.07.2024 - 19.07.2024 | Beijing
17.07.2024 - 20.07.2024 | Surabaya
17.07.2024 - 19.07.2024 | Guangzhou
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)