Plastics Moulds - Current News Articles - page 3
Articles on Plastics Moulds. Daily updated information and news from the plastics industry.
-
Plasty Gabriel: Development of the injection mold from a simulation analysis CADmould a VARIMOS
- 15.01.2018
- Plastics Moulds
- Injection simulation
During the design and manufacture of the P 10 C injection mold have been used several times simulations CADmould and VARIMOS. In this article you will be familiar with the benefits of the calculations and the problems they...
-
DESOI units on the Czech market thanks to CECHO - BOHUMIL CEMPÍREK, s.r.o.
- 04.01.2018
- Plastics Moulds
- Standardized parts
DESOI of the unit are on the market for more than ten years. They represent sets of components for forming internal threads in plastic...
-
Mechanical mold temperature controller by JAN SVOBODA company
- 21.12.2017
- Plastics Moulds
- Peripherals
How to maintain constant mold temperature during molding? That is the question the press council meets. Generally, there were two ways to solve - either the mold temperature was not solved and cooled to the lowest possible temperature, including all negative accompanying phenomena such as incorrect...
-
Hot runner system from HRSflow for Class A vehicle windows made of polycarbonate
For the two-component injection molding of the rear-quarter windows of polycarbonate (PC) for the Buick GL8 and GL8 Avenir MPVs (multi-purpose vehicles), Chinese Tier 1 supplier Shentong uses two hot runner systems from...
-
CUMSA DOUBLE RACK - revolutionary solution for molds offers CECHO - BOHUMIL CEMPÍREK s. r. o.
- 31.10.2017
- Plastics Moulds
- Standardized parts
The new Cumsa Double Rack mechanism also proves its quality on the Czech market. This alternative to conventional sloping ejectors can greatly facilitate work in tool shops, while reducing and simplifying molds quickly. As a result, moulds are available in shorter terms and at a lower price. In...
-
Synventive Announces the New Synflow® Technology
- 30.10.2017
- Plastics Moulds
- Hot runners
Molders can now slow the opening of the pin for a set distance and hold at that position until closing, or alternate different moves within a...
-
HRSflow at MSV Brno 2017: Hot runner solutions for complex challenges
- 11.09.2017
- Plastics Moulds
- Injection molding
- Exhibitions
Highlights at HRSflow’s booth at MSV Brno 2017 will include the new range of space-saving Full Compact Nozzles, the servo driven FLEXflow One hot runner technology which – set by an External Smart Interface – does not require an additional control unit, as well as newly developed Pressure Block...
-
Do you need a partner to service, modify, or repair a mold? Complex mold service is provided by ALFA CHROM servis s.r.o.
- 07.08.2017
- Plastics Moulds
- Maintenance of injection molds
The company ALFA CHROM servis s.r.o. from Bruntál has many years of experience in repairing moulds for injection molding. It originated in 1991 as a galvanizing plant in which hardcore molds were made, and later on other machine parts. During these processes, there has often been an urgent need to...
-
FLEXflow One: The Servo Driven Valve Gate System Without Control Unit
- 06.07.2017
- Plastics Moulds
FLEXflow One is the electric servo driven valve gate system where control unit is not required. For every hot runner nozzle, through a multi-steps setting, needle stroke, position and velocity can be...
-
Mould maker relies on Synventive hot runner systems for perfect shapes and automotive parts
- 04.07.2017
- Plastics Moulds
Finke Formenbau GmbH, with manufacturing and development facility in Altenbeken, Deutschland is a tool maker for plastic injection...
-
8th edition of the popular MOULDS and PLASTIC CONFERENCE Brno 2017 with a rich list of current topics
- 30.05.2017
- Plastics Moulds
- Events
- Photo reportage
Again after the year JAN SVOBODA organized together with its partners a two-day conference, rich in various lectures in the field of plastic processing. The topics of the so often questionable issue of work efficiency have been brought to the forefront. The full capacity of the lecture hall...
-
Quality of moldings in the first place
- 29.05.2017
- Plastics Moulds
- Standardized parts
When visiting Forma Tachov, we were able to take a closer look at the behind-the-scenes production that attracted us by its size, the large units that are being created here, and the state-of-the-art technological equipment needed for innovative and modern...
-
E-Normalie Servis - a new supplier of standardized parts on the Czech and Slovak markets
- 23.05.2017
- Plastics Moulds
- Design of molds
- Standardized parts
E-normalie is a new company but with many years of experience in the supply of standardized parts and subsequent servicing of pressing tools or injection...
-
Special mechanically clean hot runner systems ORYCON
- 18.04.2017
- Plastics Moulds
- Hot runners
The company ORYCON EU as producing hot runner systems in the Czech Republic, introduced a new type switchgear. The so-called "mechanically cleanable" cabinets allow using a special capping perfect mechanical cleaning of hot runner...
-
Laser cleaning of plastics molds with LASCAM systems
- 24.03.2017
- Plastics Moulds
- Cleaning of machines
- Lasers
Laser cleaning is a breakthrough technology in terms of cost savings on operational energy and consumables with proven stability. Laser systems are highly efficient, economical and ecological alternative to conventional technology available. Require no abrasives or chemicals that could be stored...
-
External injection unit E-Radial fully electric, solution to clamp the plate press
Company Mold Masters, owned since 2013 by the group Milacron, is a leading global manufacturer and innovator hot runner, having more than half of the patents filed in the field of hot runner, developed for the needs of companies producing more component parts solution that enables the use of...
-
Investment group Aakon Capital acquired the Slechta company
- 13.02.2017
- Plastics Moulds
- Business economics
Aakon Capital acquires Slechta, a leading company in the surface treatment of forms based in Jindrichuv Hradec in the Czech...
-
HASCO Austria under new corporate leadership
After six successful years as manager of the company Hasco Austria Ges.mbH in Guntramsdorf leaving DR. Ernst Brenner at the end of February 2017 to deserved...
-
Synventive Announces the SVG+, the New Standard for Sequential Valve Gate Molding
- 16.11.2016
- Plastics Moulds
- Hot runners
SVG+ systems boast the latest patented hot runner advancements, providing the optimum and most reliable molding solution for large part...
-
Directly managed threading units in manufacturing conveyors and the compression of waste
- 07.11.2016
- Plastics Moulds
- Automation
- Conveyors
- Peripherals
Company E - Normalie servis s.r.o. has 10 years experience in the production of threading...
-
Synventive Exhibits Plug’n Play® Systems and Announces the SVG+, the new standard for every Valve Gate Application, at the K-Show in Düsseldorf
- 23.08.2016
- Plastics Moulds
- Hot runners
Synventive, a business of Barnes Group Inc, will exhibits at K-Show 2016 in hall 1,booth C05. The company will feature its innovative modular hot runner technologies with a key focus on delivering a stable process allowing for perfect part quality in challenging molding...
-
Magnetic clamping: benefits QMC122 from Stäubli Systems, s.r.o.
- 10.08.2016
- Plastics Moulds
- Design of molds
Magnetic clamping systems Stäubli QMC122 forms are among the most advanced and reliable technologies in the plastics industry. The main advantages of this robust system is especially high safety for operators and quality feedback and control over the process from the control...
-
Patented control mold temperature valve helps produce plastic cups NICKNACK® in company 2D & S
- 11.07.2016
- Plastics Moulds
- Design of molds
How to keep a constant temperature of injection moulds? This is a question faced by many...
-
FLEXflow and Moldflow come together – Exploiting advantages at the planning stage in the cascade injection molding process
- 06.07.2016
- Plastics Moulds
- Hot runners
One of the highlights of the Italian hot runner specialist HRSflow is the innovative FLEXflow technology. This process, which has been subjected to constant further development, involves a servo-driven valve gate to ensure accurate, easy and flexible control of the pressures and flow rates in...
-
Design of the hot nozzle and the transfer of heat from the hot nozzle to the steel mold
- 09.06.2016
- Plastics Moulds
Injection mold can be evaluated and assessed in many ways, from many...
-
Mold-Masters going on
- 08.06.2016
- Plastics Moulds
A leading global manufacturer and innovator hot runner - fcompany Mold-Masters, owning more than 50% of patents in the field - will be presented at K Messe in Düsseldorf, which takes place this year from 26th October to 19th, a number of innovations. Those visitors will surprise and impress with...
-
A global partnership between Huf Tools and Synventive
- 18.05.2016
- Plastics Moulds
- Hot runners
- Plastic products
Huf Hülsbeck & Fürst develops and produces mechanical and electronic locking systems, driver authorisation systems, passive entry systems, car access authorisation systems, door handle systems, as well as power tailgate...
-
goHASCO - The new HASCO mouldmaking portal – live as of 18 April 2016
- 11.05.2016
- Plastics Moulds
- Design of molds
- Standardized parts
As the inventor and leading global supplier of modular standard mould components, HASCO considerably speeds up and simplifies mouldmaking – in the digital field too. Alongside the consistent development of innovations, HASCO customers also benefit from our brand values of agility, simplicity and...
-
Conference Moulds Brno in 2016 again attracted many visitors
- 10.05.2016
- Plastics Moulds
- Events
- Photo reportage
Also this year in the area of the hotel Maximus Resort at Brno two-day conference held Forms 2016, which is traditionally held company JAN SVOBODA Ltd. Already the seventh year of the highest quality event for the plastics industry will once again offer a diverse range of practical lectures on the...
-
A challenging road to success - Kovorob, s.r.o.
In the beginning, as often happens, it was the idea. The idea based on the belief that if a man gives to his work heart and doing it honestly, his effort will be rewarded with success. This vision was the basis for the establishment of Kovorob, s.r.o., whose origins date back to 1991. The full...
Branch Dictionary
