Plastics Moulds - Current News Articles - page 6
Articles on Plastics Moulds. Daily updated information and news from the plastics industry.
-
Injection moulding costs optimazing
- 23.09.2011
- Plastics Moulds
How to preserve the company experts´ know-how? The Expert System CalcMaster 7.2 software working on the reflected wave principle brings new possibilities in the offer and demand process of moulds for plastics and light metals. The system integrates the issues of price and quality in relation to...
-
Producer and innovator hot runner firm Mold-Masters presents news at autumn fairs MSV 2011 and FAKUMA 2011
- 19.09.2011
- Plastics Moulds
Leading manufacturer and innovator hot runner firm Mold-Masters owning over 50% patents field will present the on next two fairs in Brno Engineering Fair and in Fridrichshafen on Fakuma their novelties you certainly surprise and impress its designs and outputs enabling maximize and optimize...
-
Latest hot runner system
- 02.09.2011
- Plastics Moulds
Thermoplay Company has more than thirty years experience in the development of modern technologies in the industry, pressing and molding plastics. The face of ever-increasing customer requirements by continuously investing considerable resources in Thermoplay analysis and development of advanced...
-
TOOLOX33, no compromises on form stability
- 17.08.2011
- Plastics Moulds
- Design of molds
Why does HASCO recommend TOOLOX33 to its clients as a better alternative to the conventional materials 1.2311 and...
-
Technological innovations in the latest applications in the automotive industry
- 10.08.2011
- Plastics Moulds
Processing of plastic materials is very well developed automobile industry. Vehicle manufacturers are focused on reducing vehicle weight, lower power consumption and energy optimization of production processes, including reducing...
-
Heating with a new high-performance heating layer: Jets are now slim, have more power and are more economical
- 22.07.2011
- Plastics Moulds
Heisskanaltechnik Günther GmbH has introduced a new, powerful and energy efficient technology BlueFlow © nozzles first to K2010 in Düsseldorf. These nozzles are all new heating system other than a thick, rigid and large energy...
-
06E “Plug ‘N Play”® threaded nozzle and bolt-on valve gate actuator
- 24.06.2011
- Plastics Moulds
SYNVENTIVE introduces new 06E “PLUG ‘N PLAY”® hot runner system feturing threaded (screwed- in) Nozzle and bolt-on valve gate...
-
Construction tips of company Strack Normalien
- 22.06.2011
- Plastics Moulds
As every year, even now the company Strack Normalien enlarges its catalog offers with new or improved components, such as following two new...
-
Technological innovations in injection molding for parts with large dimensions
- 20.06.2011
- Plastics Moulds
Company Thermoplay SpA has developed a new hot runner system for molding parts with large dimensions, such as bumpers, spoilers, racks for car body and trucks, but also large parts in home electronics industries and variety of packaging...
-
Universal frame molds for prototypes and small series
- 16.05.2011
- Plastics Moulds
- Design of molds
- Standardized parts
K3500 Universal frame forms developed by HASCO, meets all requirements for the production of samples, prototypes and production in small quantities at low cost. It consists of a frame form in dimensions 156x196 mm, 246x296 mm, 296x396 mm and shaped inserts K3520 / K3501 and ... / ... with built-in...
-
PVC: Technological innovations in injection molding
- 08.04.2011
- Plastics Moulds
Conversion of PVC material and its compounds, which is one of the most widely used plastic materials in the construction industry, food and pharmaceutical industries, medicine, electrical equipment for industrial and packaging technology, is constantly...
-
ORYCON launches a new generation of low-profile multiple nozzles „Pan-cake“
- 06.04.2011
- Plastics Moulds
- Control technology
ORYCON EU interoduces a novelty in its range of multiple jet designed for injection molding with close location to each other in mould for up to 4...
-
Faster pressing optimal cooling - a comprehensive program of Parker Rectus couplings that exist on all systems
- 10.03.2011
- Plastics Moulds
Tools for injection molding enables the production of large quantities of plastic components. Therefore, the duration of one cycle - ie the time between two lisováními - depends not only on the size of the molded part, but partly also on cooling. Faster cooling of injection molds means increasing...
-
New single jet with a simple heating
- 10.01.2011
- Plastics Moulds
The new generation of simple jets with a new concept was designed and developed by Thermoplay to optimize different temperature control zones, reduce costs and simplify the electrical...
-
Mechanical containment management systems for one guide plate with a separate adjusting
- 16.11.2010
- Plastics Moulds
The traditional system of control for needle nozzles with shut-off system (zažehlováním) uses various types of air, hydraulic or electrical control elements, with each nozzle to always belong to one control component. The main advantage of the described method is the possibility of keeping the...
-
Solutions imbalance in the influx of bitter
- 30.08.2010
- Plastics Moulds
Balance of the bitter influx vstřikovacího proposal is part of the system. Company Thermoplay ensures that Her bitter influx systems are always balanced, and that applies to mnohodutinových It also vstřikovacích...
-
Cooling Application forms konformního cooling
- 12.07.2010
- Plastics Moulds
In vstøikolisových forms are now commonly used drilled cooling channels. Ensuring optimum cooling mold cavity is very hardened by many, not only with the shape ohledem složitost mold cavity, but often with the space necessary for the conduct of cooling channels located also included a kick-off...
-
Integrated lines for forms čelistí
- 09.06.2010
- Plastics Moulds
Thanks zkušenostem with Us Together JAN SVOBODA been with the company Ermanno vyvinout Balz and patented a new system for driving a large čelistí forms. The system is intended for molds for plastics and rubber, but is suitable for use in Light...
-
Bunk form with integrated valves
- 14.05.2010
- Plastics Moulds
One very interesting news that Thermoplay presented to Düsseldorfském Engineering Fair, is the story form with opposing jets and closing systémem.Společnost Thermoplay has long experience with hot systems that use traditional locking systems with shut-off group installed externally with respect to...
-
Reduce production costs by analyzing the injection molding process
The largest part of the costs of implementing the new product is fixed during the development phase and production preparation. This part may consist of up to 70% of total costs. Especially with injection-molded parts, which is mostly on large production runs and costly dedicated tools, the...
-
Optimum cleaning material for screws and cylinders for presses and extruders
- 15.02.2010
- Plastics Moulds
MACHINES HF OF ITALY SRL produces an optimum cleaning material for screws and cylinders for presses and extruders for plastic material. Our cleaning material belong to the line HFC SPECIAL CLEANER, created for the cleaning and maintenance services for molds, presses and...
-
Application of PVD treatment of molds for plastic injection molding and casting Al
- 02.02.2010
- Plastics Moulds
Thin coatings obtained by methods PVD (Physical Vapor Deposition) or PACVD (Plasma Assisted Chemical Vapor Deposition) Already have obtained the surface engineering svou pry a position and their practical applications are now in many oblastech Already...
-
ORYCON EU second-stage production of bitter influx
- 19.01.2010
- Plastics Moulds
- Hot runners
Even though the European market for system vendors působí series of bitter inlet, back them These systems manufactured in Bohemia or Slovakia. First Society of která production came to the Czech Republic is a company ORYCON CONTROL TECHNOLOGY INC.. This American company, která se Already since...
-
Simulation software Moldex3D
- 16.05.2009
- Plastics Moulds
Abstract: Simulation software Moldex3D provides the most comprehensive True 3D simulation capabilities for plastics injection moulding, such as solid melt flow, 3D runner effect, 3D mould temperature, fountain flow, inertia effect or viscoelasticity. These superior functions effectively help users...
Branch Dictionary
