Suppliers of raw materials - Current News Articles - page 2
Articles on Suppliers of raw materials. Daily updated information and news from the plastics industry.
-
Ampacet introduces Organoleptic Preserver 1363 designed for polyolefin-based packaging
- 04.09.2023
- Suppliers of raw materials
- Additives for plastics
Ampacet, a global masterbatch leader, has introduced Organoleptic Preserver 1363, a highly efficient additive designed to capture off-tasting components present in polyolefin packaging and protect products from off-tastes and unpleasant...
-
Röchling-ReLoop®: Materials with a reduced ecological footprint, suitable for the production of plastic tanks
Thanks to our product line of Röchling-ReLoop® materials, denoting high-quality recycled materials, we save valuable natural resources and effectively close the life cycles of...
-
Hydrogen buses run on hydrogen from Slovnaft on Bratislava's roads
- 18.08.2023
- Suppliers of raw materials
- Automotive
The Bratislava transport company put the first four hydrogen buses of its fleet into operation in August 2023. The hydrogen that is filled into vehicles at the hydrogen filling station in Vlè hrdl comes from...
-
TER Plastics presents the G-Blend ® product line
- 07.08.2023
- Suppliers of raw materials
- Technical plastics
In the automotive sector, we increasingly encounter increased demand for high-quality regranulates and sustainable materials. This requirement within the PC/ASB material group is met by the G-Blend ® product line, introduced by TER...
-
Polykemi AB and HEXPOL TPE AB have collaborated on the development of new materials
Making a material selection can be a complicated task when designing consumer products. There are many properties to balance, and the choice is even more complex when including eco-design principles. Selecting two materials for a 2K part is not doubling the difficulty; it is...
-
ORLEN Unipetrol is launching a pilot operation of a hydrogen bus in the Czech cities
- 10.07.2023
- Suppliers of raw materials
- Automotive
The refining and petrochemical group ORLEN Unipetrol, in cooperation with the Czech cities of Most and Litvínov, is starting a pilot operation of a hydrogen bus, developed by the Slovak company Mobility&Innovation Production...
-
Vacula s.r.o. supplies custom-made compounds and additives Polytechs France
Recently, we at VACULA s.r.o. had the honor to attend the distributor days at Polytechs France. It was an event that allowed us to learn more about the products and services of Polytechs, a leader in the custom manufacturing of compounds and additives for polymer manufacturers and...
-
Ampacet introduces AA Scavenger for PET and rPET bottles
Ampacet, a global masterbatch leader, has introduced AA Scavenger 0846, an additive designed to reduce the level of acetaldehyde in PET and rPET bottles and preserve the organoleptic properties of...
-
IMCD becomes new distributor for Evonik’s medical care polymer materials
IMCD, a global leader in the distribution of specialty chemicals and ingredients has entered into a strategic distribution agreement with Evonik, a specialty chemicals company. Under this agreement, IMCD will serve as Evonik’s European distributor for its Medical Care series, covering EEA countries...
-
K. D. Feddersen CEE GmbH supplies recycled ABS and PS from SKYTECH
- 15.05.2023
- Suppliers of raw materials
- ABS
- Recycled plastics
Using a patented manufacturing process, SKYTECH produces a variety of high-quality recycled plastics such as Skylonitrile® (rABS) and Skystyrene® (rPS), which meet the high demands of manufacturers and end consumers...
-
RESINEX Czech Republic presents the INFINO® product line
Polycarbonates under the INFINO® brand belong to the portfolio of the world's leading manufacturer LOTTE Chemical. LOTTE has a main production plant in Korea and a compounding plant in Hungary. Thanks to this, customers can rely on the delivery of material in short periods and at prices that are...
-
VACULA : Customer trust is one of the most important prerequisites for a successful company
The family company, VACULA s.r.o., has gradually developed into the strongest player on the technical plastics market since its establishment in 1997. After the death of the founder of the company, the family was forced to make some big changes. We can now confirm that the younger generation is...
-
VALPLAST & 1.PLASTCOMPANY: Two young companies with a promising future celebrated their 10th anniversary
- 17.04.2023
- Suppliers of raw materials
- Events
Friendship, fun, trust, professionalism and expertise were the most mentioned words during the spectacular celebration of companies VALPLAST - supplier of plastic granules and 1.PLASTCOMPANY - supplier of plastic technologies. This celebration was proof that it is possible to build strong and...
-
Ampacet GASTOP-Flex™ Named Plastics Recycling Awards Europe Finalist
- 03.04.2023
- Suppliers of raw materials
- Additives for plastics
Ampacet GASTOP-Flex™ has been named a Plastics Recycling Awards Europe 2023 finalist in the category of Product Technology Innovation of the Year. GASTOP-Flex is part of the Ampacet R3 Sustainable Solutions portfolio, which features innovations that help to protect our...
-
Ampacet introduces ELTech™ masterbatches for E&E market
- 01.03.2023
- Suppliers of raw materials
- Additives for plastics
Ampacet, a global masterbatch leader, has launched the ELTech™ product range, specifically formulated to respond to the stringent requirements of the E&E...
-
Addiplast: Eco-development for better recycling
Addiplast Group develops its own innovation strategy in the field of packaging materials and supports sustainable development and recycling. The Addicolor manufacturing plant has already designed 5 products that are part of the sustainable assortment and are detectable using near infrared radiation...
-
The Central European Plastics Meeting 2022 has once again brought together plastic artists from Central Europe
- 12.12.2022
- Suppliers of raw materials
- Events
- Photo reportage
The editors of PlasticPortal.eu participated in the 5th year of the traditional Central European Plastics Meeting (CEPM), which is organized by the Hungarian company myCEPPI. The conference was held in autumn in the beautiful premises of the Várkert Bazaar in...
-
ORLEN expands network of filling stations in Europe
- 07.12.2022
- Suppliers of raw materials
- Business economics
The international ORLEN Group, which operates the ORLEN Benzina network of filling stations in Czechia, is significantly expanding in Hungary and Slovakia. The ORLEN Group entered Hungary because of the corrective measures related to its acquisition of Grupa LOTOS and an agreement with the MOL...
-
Successful collaboration on material change resulted in reduced CO₂ footprint
The Danish manufacturer EVBiler ApS was looking for a more environmentally friendly and material-smart solution for one of their products. Polykemi Group provided them with the optimal material that reduced their CO₂ footprint by more than...
-
The results of the MOL Group in the 3rd quarter were positively affected by oil extraction and processing
- 14.11.2022
- Suppliers of raw materials
- Business economics
MOL Group reported today its financial results for the third quarter of 2022. Thanks to strong results in the Upstream and Downstream divisions, supported by macroeconomic factors, the MOL Group achieved a net CCS EBITDA of USD 1449 million in the third quarter of...
-
ORLEN Unipetrol opens a new production unit and becomes one of the four largest dicyclopentadiene producers in Europe
- 10.11.2022
- Suppliers of raw materials
- Research
ORLEN Unipetrol, the largest Czech petrochemical company, has commissioned a new production unit for dicyclopentadiene, which will expand its product portfolio. This liquid hydrocarbon, abbreviated as DCPD, has a broad range of applications in the automotive industry, construction, electrical...
-
Secret Sea-Grit: Successful partnership between Ampacet and NaturePlast
Ampacet, a global masterbatch leader, and NaturePlast, bioplastic experts since 2006, have launched the Secret Sea-Grit collection made from 100% PCR material and aquaculture...
-
K.D. Feddersen Holding GmbH: Strategic start-up investment in Biofiber Tech Sweden AB
- 20.10.2022
- Suppliers of raw materials
- 3D technology
- Compounds
Hamburg-based K.D. Feddersen Holding GmbH acquired a minority stake in the start-up Biofiber Tech Sweden AB in June 2022. Shortly after port F was founded in January 2021, initial talks began with Biofiber Tech Sweden AB (BFT for short) to evaluate a possible strategic collaboration, including...
-
GRAFE implements modern design ideas for new textures
According to the designers at GRAFE, Blankenhain, textile surface haptics are very much in vogue among plastics processors. At K 2022, visitors to stand A63 in hall 6 will be shown high-quality effect combinations that visually complete this surface trend and thus take product design to a new...
-
Ampacet GASTOP-Flex boosts flexible packaging barrier performance in compliance with circular economy design guidelines
Ampacet, a global masterbatch leader, introduces GASTOP-Flex, a masterbatch solution designed to reduce gas transmission rates in flexible applications and help product designers to optimise their packaging to meet circular economy...
-
ML Polyolefins with an award for regranulate with rubber filling
- 22.08.2022
- Suppliers of raw materials
- Composites
- Awards
During the International Fair for Plastics and Rubber Processing PLASTPOL, the winners of competition for the best products were presented. The award in the category ‘Plastics Processing Technologies’ went to ML Polyolefins together with partners: Bydgoszcz Industrial Cluster Tool Valley, Bydgoszcz...
-
How to perfectly treat metal elements in the exterior with PULRON
- 17.08.2022
- Suppliers of raw materials
- Surface treatment
As an architect or investor, do you deal with exterior metal elements such as railings, fences, gates, benches, play elements for children and other metal objects? Almost every building has one. You definitely want their final surface treatment to protect them for as long as possible, against all...
-
Institute that freed Slovakia from leaded petrol marks 70th anniversary
- 08.08.2022
- Suppliers of raw materials
- Events
The Research Institute for Oil and Hydrocarbon Gases in the past, called VÚRUP, a.s. today. The company, thanks to which Slovakia belonged among the first countries in the European Union to get rid of leaded petrol, celebrated its 70th anniversary in July this...
-
With high-strength thermoplastics, compound manufacturers make wheel designers' job easier
Cycle chic, e-bike boom, bike culture, low-tech, high-tech, bike highways - the bike is in the midst of its reinvention; in the midst of a transformation from a mere means of transportation and sports equipment to an expression of a serene, sustainable, individual attitude to life. More and more...
-
Teknor Apex Announces NEW Sarlink® R2 3180B TPV with 25% recycled content
- 11.07.2022
- Suppliers of raw materials
- Recycled plastics
Sarlink® thermoplastic vulcanizates (TPVs) are the premier choice for critical applications that require superior elasticity and long-term performance, like extruded seals and hoses or molded...
Latest Classifieds
-
03.05.2024 | ID: 202419068
Top Advert Cooperation: Nezaplatené faktúry firmou Industry Storm s.r.o.
19.04.2024 | ID: 202418993
Top AdvertFor Sale: Injection molding machine LOG160T
26.07.2024 | ID: 202419531
For Sale: Injection moulding machine MA900 II 260e
26.07.2024 | ID: 202419530
For Sale: Krauss Maffei KM1300 - 8100 M Injection Molding Machine
25.07.2024 | ID: 202419529
For Sale: Morethan A GF15 HSK Black
25.07.2024 | ID: 202419528
-
24.07.2024 | ID: 202419527
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
-
03.05.2024 | ID: 202419068
Top Advert For Sale: Injection molding machine LOG160T
26.07.2024 | ID: 202419531
For Sale: Injection moulding machine MA900 II 260e
26.07.2024 | ID: 202419530
For Sale: Krauss Maffei KM1300 - 8100 M Injection Molding Machine
25.07.2024 | ID: 202419529
For Sale: Morethan A GF15 HSK Black
25.07.2024 | ID: 202419528
-
24.07.2024 | ID: 202419527
-
24.07.2024 | ID: 202419526
Upcoming Events
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
04.09.2024 - 07.09.2024 | Jakarta
05.09.2024 - 07.09.2024 | Karachi
08.09.2024 - 10.09.2024 | Cairo
09.09.2024 - 14.09.2024 | Chicago
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
13.08.2024
21.08.2024
Formnext + PM South China 2024
28.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Cutting equipment operator - VALLOS s.r.o.
22.07.2024
Projektový vedúci pre nástrojáreò ESOX-PLAST s.r.o.
19.07.2024
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)