Suppliers of raw materials - Current News Articles - page 5
Articles on Suppliers of raw materials. Daily updated information and news from the plastics industry.
-
MOL has completed the construction of a plant for the production of rubber asphalt from used tires at the Hungarian Zala refinery
- 30.10.2020
- Suppliers of raw materials
- Business economics
The MOL Group has completed the construction of a rubber asphalt plant at the Hungarian Zala refinery for approximately USD 10 million. The plant can produce 20,000 tons of rubber asphalt per year. In addition to recycling 8-10 percent of used tires in Hungary, the new plant will contribute to the...
-
K.D. Feddersen – your distributor for engineering plastics from Teijin
K.D. Feddersen CEE GmbH is the distributor for Teijin’s PC and PC/ABS for Central Eastern Europe in the countries Austria, Switzerland, Poland, Hungary, Romania, Czech Republic and...
-
Unipetrol also completed the second part of the new polyethylene unit
Unipetrol has completed the highest ever investment in the Czech chemical industry. Following the completion of the respective tests, the company took delivery of the second part of the new polyethylene unit, PE3. The first part of the unit producing natural polyethylene (the Natural Line) was put...
-
MOL Group and Meraxis will work together to produce recycled plastics
The Swiss Meraxis business group and the leading Central European integrated oil, gas and petrochemical group MOL have entered into a strategic partnership focused on the development and production of recycled polyolefins. The goal is to develop and produce high quality materials based on recycling...
-
LANXESS launches bio-based prepolymer line Adiprene Green
- 31.08.2020
- Suppliers of raw materials
- Bioplastics
- Rubber
LANXESS has developed a new range of MDI polyether prepolymers containing renewable raw materials. Marketed under the brand name Adiprene Green, the products are suitable as replacement for existing fossil based polyether prepolymers and allow the PU processor to produce components with a reduced...
-
Addiplast group expands its engineering plastics range with its ADDIBIO RENEW range of natural fibers and bio-polymers
- 10.08.2020
- Suppliers of raw materials
- Automotive
- Packaging
- Bioplastics
- Circular economy
- Compounds
- PA Polyamide
- PE Polyethylene
- PP Polypropylene
- Recycled plastics
- Technical plastics
- High Performance Polymers
Addiplast Group, founded in 1986, now, has 2 production sites: Addiplast & Addikem in Saint Pal de Mons in France, equipped with twin-screw extruders and Buss co-mixers. Both sites are certified IATF 16949 and ISO 14001 and have a production capacity of 30...
-
MOL has discovered new natural gas and condensate deposits in Pakistan
- 28.07.2020
- Suppliers of raw materials
- Research
As the operator of the TAL unit in Pakistan, MOL has discovered new deposits of natural gas and condensate. This is the thirteenth positive result of the company's geological survey in Pakistan and the tenth discovery on the TAL...
-
Polykemi Group increases the efforts in China
- 06.07.2020
- Suppliers of raw materials
- Business economics
Polykemi Compounds in Kunshan, China has recently finished their third factory building. This gives the company the possibility to install at least five additional extruding lines, that would increase the production capacity by more than 10 000 tonnes per...
-
New cooperation between RÖHM and GRAFE
From 1 July 2020, GRAFE Polymer Solutions GmbH, based in Blankenhain, will start production and sales tasks for low-volume orders for PLEXIGLAS® pre-painted material from RÖHM GmbH on the German...
-
MOL Group reported a net loss of $ 152 million in the first quarter
- 12.06.2020
- Suppliers of raw materials
- Business economics
MOL Group announced financial results for the first quarter of 2020. Extensive losses from inventories and foreign exchange transactions resulted in MOL reporting a net loss of $ 152 million. This is the first manifestation of a pandemic...
-
PA66 Vydyne - Over 180 approvals for automotive OEMs and Tiers
Company Ascend is the world‘s largest fully integrated PA66 producer. Full integration means that Ascend produces all raw materials needed for PA66 polymerisation itself and customers therefore benefit from high quality and reliable availability of PA66...
-
Ultrapolymers and Domo extend partnership with Technyl
DOMO Chemicals, a leading producer of engineering materials and Ultrapolymers, the pan-European distribution company, have announced a European distribution partnership. The acquisition of Solvay’s European Performance Polyamides Business (Polytechnyl) by DOMO initiated a change in Technyl®...
-
Scanfill AB and Plast Petter AB in new collaboration - will manufacture up to half a million protective face shields
- 14.05.2020
- Suppliers of raw materials
- Compounds
Packaging company Scanfill is adjusting the production for a brand new market. The company will produce up to half a million face shields together with Plast Petter AB - every...
-
Polymers from Slovnaft are also used in the production of protective equipment for healthcare
In response to the spread of coronavirus, the demand for health care products has increased significantly this year. Polymers from Slovnaft are also used in their production. Polymers from the Bratislava refinery - polypropylene and polyethylene - are suitable for the production of protective...
-
How to spin with bacteria on the surface of objects not only in hospitals?
Currently, people deal with hygiene and protection against viruses and bacteria in practically all places. But for some it is absolutely essential. Are you interested in how to treat the surfaces of objects so that they are in front of microbes et al. perfectly...
-
The MOL Group guarantees a secure supply when optimized production and financial measures are taken
- 14.04.2020
- Suppliers of raw materials
- Business economics
The MOL Group has put in place measures that mitigate the impact of the current situation on the Group and allow the MOL to emerge stronger from this crisis. The MOL Group focuses on protecting the health and safety of its employees, minimizing the spread of COVID-19 through operations, and...
-
The MOL Group's 2019 profit exceeded the updated full-year outlook
- 28.02.2020
- Suppliers of raw materials
- Business economics
The MOL Group reported its 2019 results. Despite the challenges and volatility of the external environment at the end of the year, the MOL Group achieved a cleaned CCS EBITDA of $ 598 million in the fourth quarter. Adjusted CCS EBITDA for the full year is $ 2.44 billion, outperforming the recently...
-
Final investment decision on the Rijeka Refinery Residue upgrade project
- 09.01.2020
- Suppliers of raw materials
- Business economics
INA Supervisory Board granted its prior agreement for the Rijeka Refinery Residue Upgrade project and the INA Management Board unanimously approved the investment. The decision was supported both by the Croatian Government and by MOL, the two major shareholders of...
-
Fillamentum Industrial introduces the new Flexfill TPE
- 17.12.2019
- Suppliers of raw materials
- 3D Fillaments
Fillamentum Industrial is a Czech manufacturer of the highest quality 3D printing filaments, which are particularly suitable for use in industrial sectors. Flexfill TPE is a polypropylene-based thermoplastic elastomer and is defined by completely different properties than the Flexfill TPU...
-
K 2019: LDS filaments for 3D printing by Ensinger
- 11.12.2019
- Suppliers of raw materials
- 3D Fillaments
At K 2019 Ensinger showed the newly developed filaments for the additive manufacturing of 3D micro-components with conductive structures. In addition, the Compounds division is the only manufacturer worldwide to present PEEK LDS compounds approved by LPKF Laser & Electronics...
-
MOL Group completes acquisition of Aurora Group, strengthening position in recycled, sustainable plastics compounding segment
- 10.12.2019
- Suppliers of raw materials
- Compounds
Following satisfaction of customary transaction approvals, MOL Group announce that effective, it has acquired 100% shareholding in Aurora, a German plastic compounder company. As a result of the acquisition, MOL Group is strengthening its position in recycled, sustainable compounding segment and in...
-
Zytel HTN Bridges the Performance Gap
DuPont™ Zytel® HTN cost-effectively bridges the performance gap between conventional engineering resins and high-end specialty...
-
MOL Group upgrades 2019 guidance after robust Q3 results
- 20.11.2019
- Suppliers of raw materials
- Business economics
MOL Group announced its financial results for the third quarter of 2019. Despite a weaker macro environment and much lower oil and gas prices, strong Q3 EBITDA allows MOL Group to raise 2019 full year guidance to „around USD 2.4 bn” from „around USD 2.3...
-
Polykemi leads the way for recycled plastic compounds by hosting in-house workshop
Over recent years, a change has come regarding the usage of recycled plastic compounds within the industry. Polykemi now supports this process further by hosting a tour of in-house workshops at subcontractors and end customer across...
-
Delrin CPE – A New Platform of Emission-minimized POM Homopolymers with Optimized Processing Efficiency
The recent commercial launch of the first grades in the DuPont™ Delrin® CPE family marks the inception of a completely new generation of Delrin® POM homopolymers. These grades enable significant reductions in emission values and mold deposits with further efficiency-boosting application and...
-
The MOL Group has laid the cornerstone of the technological complex for the production of polyether polyols
In the Hungarian town Tiszaújváros, the foundation stone of the polyether polyol production complex was laid. The plant will be put into operation in 2021. The MOL Group will invest 1.2 billion EUR in the construction of the complex, which will produce approximately 200,000 tons of polyols per...
-
GRAFE helps to eliminate problems such as unwanted flow lines at an early stage
- 09.10.2019
- Suppliers of raw materials
- Additives for plastics
Plastics with metallic effects are now an important design element - whether in automotive visible parts, the furniture industry, electronics or household goods. The Thuringian company GRAFE, headquartered in Blankenhain, has extensive expertise in this...
-
Effective flame retardant for polycarbonate and polyethylene terephthalate from GRAFE
- 27.09.2019
- Suppliers of raw materials
- Additives for plastics
GRAFE, headquartered in Blankenhain, has developed a new effective flame retardant for polycarbonate. It contains neither halogen nor phosphorus and achieves a UL94-V0 classification even at comparatively low...
-
High Hydrolysis Resistance PA from Safic-Alcan
The power needed to drive a vehicle upon fuel combustion is produced by the engine. As the power is produced, the engine heat increases. Removing the increasing heat of the engine is one of the critical parameters that affect the vehicle performance and service life. Cooling systems are required to...
-
The success story continues - a strong first half year of 2019 for Polykemi AB
- 10.09.2019
- Suppliers of raw materials
- Business economics
After several years with strong growth, Polykemi AB continues to deliver very strong results. During the first half of 2019, the company has gained 71 new businesses. We actually are at all time high levels and are so pleased to be able to keep on delivering that kind of figures, informs Mr Mattias...
Latest Classifieds
-
03.05.2024 | ID: 202419068
Top Advert Cooperation: Nezaplatené faktúry firmou Industry Storm s.r.o.
19.04.2024 | ID: 202418993
Top AdvertFor Sale: Injection molding machine LOG160T
26.07.2024 | ID: 202419531
For Sale: Injection moulding machine MA900 II 260e
26.07.2024 | ID: 202419530
For Sale: Krauss Maffei KM1300 - 8100 M Injection Molding Machine
25.07.2024 | ID: 202419529
For Sale: Morethan A GF15 HSK Black
25.07.2024 | ID: 202419528
-
24.07.2024 | ID: 202419527
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
-
03.05.2024 | ID: 202419068
Top Advert For Sale: Injection molding machine LOG160T
26.07.2024 | ID: 202419531
For Sale: Injection moulding machine MA900 II 260e
26.07.2024 | ID: 202419530
For Sale: Krauss Maffei KM1300 - 8100 M Injection Molding Machine
25.07.2024 | ID: 202419529
For Sale: Morethan A GF15 HSK Black
25.07.2024 | ID: 202419528
-
24.07.2024 | ID: 202419527
-
24.07.2024 | ID: 202419526
Upcoming Events
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
04.09.2024 - 07.09.2024 | Jakarta
05.09.2024 - 07.09.2024 | Karachi
08.09.2024 - 10.09.2024 | Cairo
09.09.2024 - 14.09.2024 | Chicago
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
13.08.2024
21.08.2024
Formnext + PM South China 2024
28.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Cutting equipment operator - VALLOS s.r.o.
22.07.2024
Projektový vedúci pre nástrojáreò ESOX-PLAST s.r.o.
19.07.2024
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024