Current News Articles
Daily updated information and news from the plastics industry.
-
Electromobility as a weapon in the hybrid war
- 31.12.2011
- Services
- Electromobility
It turns out that electromobility is a polarizing issue comparable to migration, LGBT issues or vaccination against covid. It is therefore no surprise that it also plays a significant role in the information war that has long been waged on social media and in the media as part of the hybrid...
-
Plastika produces tens of millions of car parts a year. It is helped by intensive digitization
Plastika has transformed from a keyboard manufacturer to one of the largest producers of plastic parts for the automotive industry in the Czech Republic. The Kroměříž-based company, whose revenues exceed CZK 1 billion, produces tens of millions of mouldings every year, which can be found in most...
-
TotalEnergies Equivis HE: The new generation of hydraulic oils for maximum performance, energy savings and reliability
Hydraulic systems are a key component of many industrial and mobile plants. Their efficient and energy-saving operation depends on the quality of the hydraulic oil that provides power transmission, lubrication and component protection. Equivis HE, a TotalEnergies product, represents the leading...
-
Lifotcolor: one of the key players in the world of pigment dispersions
- 31.12.2011
- Additives for plastics
- Compounds
Lifocolor Farben has also established itself in the fiercely competitive market for pigment dispersions. Companies operating in this market specialize in the manufacture and distribution of pigment dispersions for a wide range of industries including plastics, paints, coatings and textiles. Given...
-
GASTOP-FlexTM boosts flexible packaging barrier performance in compliance with circular economy design guidelines
Ampacet GASTOP-FlexTM technology allows to address the trends towards a reduction of plastic packaging wastes and higher...
-
Ampacet Introduces Low Halogen and Halogen-Free Flame Retardant Masterbatches
Ampacet, a global masterbatch leader, has introduced Halolite 527 and Halofree 533, low-halogen and halogen-free flame retardant masterbatches, to comply with international standards IEC 61249-2-21 and EN 50642 regulating maximum halogen and antimony...
-
Successful presentation of Arburg at Fakuma 2011
- 19.12.2011
- Machinery & Equipment
Lossburg: this year's presentation of Arburg the international plastics trade fair in Friedrichshafen Fakuma a success that surpassed all expectations. In addition to the celebration of the anniversary "50 years of ALLROUNDER machine" and the launch of a new series of electric injection molding...
-
EWIKON - introduced MH HPS III jets with direct lateral injection
- 16.12.2011
- Plastics Moulds
Due to continuous development and improvement of technologies in areas such as multiple jets and wide exposure of specialists in the field of plastic injection molding, it is possible to inject the most complex applications with elegant and reliable...
-
KOWA al. s ro - plastic pipes for water and aggressive media
- 09.12.2011
- Plastics and Rubber products
Potřebujete plastové potrubní rozvody pro vodu nebo agresivní media? Pak jste na správné adrese! Naše společnost dodává plastové potrubní rozvody již od roku...
-
PRO EKO 8. výstava recyklácie a zhodnocovania odpadov
- 07.12.2011
- Services
V dňoch 24. až 27. apríla 2012 sa opätovne otvoria brány výstavných podujatí - 8. ročníka najväčšej ekologickej výstavy PRO EKO, 15. ročníka stavebnej výstavy PRO ARCH a 11. ročníka výstavy regionálneho rozvoja a cestovného...
-
SLOVNAFT continues to mega investment, 300 million euros will go into the manufacturing of plastics
- 02.12.2011
- Suppliers of raw materials
Three large-scale investment projects planned to carry out SLOVNAFT in the Bratislava refinery in the next 42 months totaling more than 300 million euros. Their aim is to increase the competitiveness of plastics as well as improving the ecological parameters of production. Currently the largest...
-
Used batteries are the bigboxes
- 30.11.2011
- Plastics packaging
Someone that meets before someone later. Do not worry, We are talking about the battery in a car that just expire. To him, therefore, asked Jan Neruda. Today, fortunately, do not bypass ignominiously around and dropping bits of straw as a classic, we have several options to resolve our...
-
Printer Willmark launched advertising campaigns PRINT
- 25.11.2011
- Services
Large printer Willmark launched in autumn 2011 image campaign titled "print large COMFORT ". The campaign aims to communicate the key benefits of working with printers that are professionalism, the highest rate in Slovakia wide format printing, exceptional quality and excellent...
-
New machines from GF AgieCharmilles LASER
- 23.11.2011
- Machinery & Equipment
Reliable equipment for laser texturing, engraving, mikroštruktúrovanie, marking and description of controlled surface areas with guaranteed high repeatability with production deployment from simple 2D geometry to complex 3D geometric...
-
GLASTHERM - thermal insulation for the purpose of insulation forms
- 21.11.2011
- Plastics Moulds
Use insulation boards is one of the basic requirements of sound and efficient functioning of the forms. Contribute significantly to reducing energy losses. Properly insulated forms conserve energy and also leads to better regulate the temperature inside the...
-
Kids 'Lab hocus-pocus
- 18.11.2011
- Suppliers of raw materials
Chemical company BASF has developed a CSR Project Kids' Lab and founded the first children's laboratory in the German city of Ludwigshafen (BASF headquarters) in 1997. Currently, BASF Kids' Labs are located in 15 countries and was first referred to this program in Slovakia, 6 October...
-
Record the number of sorted plastic overcome!
- 16.11.2011
- Plastics recycling
Visitors summer festival Bažant Pohoda overcome last year's record number of sorted plastic in an event. Now in its sixth year, the festival can be sorted...
-
A new program for high tempering temperature from Hasco
New HT-Series with a special seal long withstand high...
-
VELOX introduces a new range of products of company POLYRAM: BONDYRAM the TL tie layer
- 09.11.2011
- Suppliers of raw materials
Introducing the new TL series Bondyram to Czech customers is a continuation of the successful introduction and use of compatibilizer, impact resistance modifiers and binding agents (coupling agents) in plastics...
-
Cylinders for dialing forms with integrated gear
- 07.11.2011
- Plastics Moulds
To reduce molds size, acceleration of production and simplify the handling company VEGA in collaboration with Jan Svoboda Ltd. has developed cylinder with integral gear for insertion into the...
-
ADDIBIO Renew ® from ADDIPLAST
- 04.11.2011
- Suppliers of raw materials
Addiplast - independent french compounder specialized in the manufacture and the formulation de technical...
-
Plastics in Packaging Industry
- 02.11.2011
- Plastics packaging
The rapid development of global production of plastics for last 20 years that will be used in virtually all areas of human activities, missed the packaging industry. What was the cause of such a...
-
New additives for high performance bioplastics
- 31.10.2011
- Suppliers of raw materials
Successful cooperation between Henkel and Tecnaro. As a result stenčujúcich fossil reserves, the industry remains intensely interested in bioplastics. However, when compared with conventional high-performance plastics have their limitations - among other concerns, in particular their stability and...
-
Software for the analysis of injection molding
- 26.10.2011
- Plastics Moulds
Cadmould ® 3D-F is a simulation software to analyze injection molding, whose calculations are based on a proprietary 3D model that was developed by German company Simcon GmbH. The genesis of the software involved (and to continue to cooperate in its development), Technical University of Aachen...
-
Industrial quality - the best balance of price and quality for demanding applications nepohledové.
- 24.10.2011
- Suppliers of raw materials
- Recycled plastics
Increasing economic and environmental pressure leads to a significant change in terms of the plastic. With regard to the application requirements of customers and thus significantly extends the application of high quality recycled...
-
Pilot project with compostable bags for biodegradable waste has been successful
- 21.10.2011
- Plastics recycling
It seems that civilization flooded hundreds of years of plastic bags on the wane. Pilot project with biodegradable bags based on the substance Ecovio developed by the chemical company BASF, was in Germany Bad Dürkheimu...
-
Ergonomics and efficiency of modern packaging
- 19.10.2011
- Plastics packaging
Ergonomics and efficiency are two concepts often inflected in the mouth of everyone who's with the optimization of logistics operations in its serious. Prices of transport are the same as ten years ago, rising labor costs, increasing demands for quality, but selling prices are falling. It remains...
-
VIENNA-TEC 2012 - Austria's largest fair of industrial technologies and innovations
- 17.10.2011
- Services
In 2012, the fair will be the main theme of innovation in priemysle. Termín: 9th-12th 10th 2012 to a modern exhibition center Messe Wien in...
-
"To wander wastes NATUR-PACK-om?"
- 12.10.2011
- Plastics recycling
Issuing organization NATUR-PACK, as a DAPHNE Institute of Applied Ecology joined forces for primary school pupils prepare for school year 2011/12 a new program called "Where our travels wastes...
-
International Engineering Fair in Brno-Preliminary Final Report and fotoreport
- 09.10.2011
- Services
53rd International Engineering Fair and 6 International Fair of Logistics and Transport confirmed the positive situation in the economy and optimistic expectations of industrial firms. Central leader of industrial technology trade fair has seen a growing interest of exhibitors - were presented at...
Branch Dictionary
