Current News Articles - page 26
Daily updated information and news from the plastics industry.
-
Cryogenic flow removal on thermoplastic and elastomer products from Messer Technogas s.r.o.
In many cases, there are thin overflows/burrs on the finished parts produced on the injection molding machines, which must then be removed. However, the use of traditional deburring methods is often problematic, as surface damage to parts or imperfect overflow removal often...
-
Puzzle floor from TOMIRTECH, s.r.o.
The puzzle floor is made of recycled SBR rubber granulate, which is glued with polyurethane glue. Its density is up to 1000 kg/m3 and can withstand a really extreme load of up to 290 t/m2 at a thickness of 8 mm. The coefficient of friction of 0.81 (according to VDI 2700 p.14) guarantees a perfect...
-
Is it worth automating?
- 12.10.2020
- Machinery & Equipment
- Automation
- Robotics
At a time of labor shortages and high labor costs, the Covid-19 pandemic has complicated the situation, but paradoxically it can also be a motivation for more consistent automation. Investing in sensible robotization of industrial plants is now an economically advantageous solution that can pay off...
-
Efficiency of plasma treatment depending on the distance of the discharge from the substrate - atmospheric plasma nozzle
- 09.10.2020
- Surface treatment
Customer-oriented research in the field of using a plasma atmospheric nozzle (Gliding arch discharge) for products with variable shape deviation was performed on PP boards in order to modify the surface properties. The influence of the distance of the discharge from the substrate on the final...
-
SUBTER PLUS s.r.o. - From rubber and plastic mixers through presses and extruders to 100% optical inspection
- 08.10.2020
- Services
- Automation
- Mold cleaning
- Purge Compound
- Finishing machines
- Extrusion
- Rubber
- Quality control
- Testing of plastics
- Injection molding machines
SUBTER PLUS supplies its customers in Central and Eastern Europe with both traditional machines and new technologies for the rubber and plastics industries. Recently, the topics of Industry 4.0 and process automation have been much discussed. This is where these new technologies find their...
-
The summer months brought a revival of production in the Czech Republic
- 07.10.2020
- Automotive
Motor vehicle production in the Czech Republic is only very slowly catching up with the losses caused by the coronavirus pandemic. From the beginning of the year to the end of August, a total of 691,889 motor vehicles were produced, ie 26.9% less than in the same period of 2019. This trend...
-
Gorilla Machines s.r.o. presents: Complex central transport systems VISMEC
- 05.10.2020
- Machinery & Equipment
- Conveyors
The heart of VISMEC central transport systems is the central control microprocessor unit FW 50 enabling the control of up to 48 sampling points together with one vacuum source and the possibility of an emergency backup system. The system is connected via the Visnet-Bus-communication...
-
Allrounder 1300 T: Next-generation rotary table machine
- 02.10.2020
- Machinery & Equipment
- Injection molding machines
With the Allrounder 1300 T, Arburg is significantly expanding its range of vertical rotary table machines to include a 1,300-mm table diameter option. Compared to its predecessor, the 1200 T, this new machine offers more space for heavier moulds – and with a significantly reduced installation...
-
Unipetrol also completed the second part of the new polyethylene unit
Unipetrol has completed the highest ever investment in the Czech chemical industry. Following the completion of the respective tests, the company took delivery of the second part of the new polyethylene unit, PE3. The first part of the unit producing natural polyethylene (the Natural Line) was put...
-
Innovation of PLASTIKA a.s. in industries
- 29.09.2020
- Machinery & Equipment
- Surface treatment
- Research
Plastika a.s. is intensively and long-term preparing for the upcoming changes in the industry. Much of the innovation concerns digitization in manufacturing and logistics activities. We try to make the most of digitization to best suit our technologies and specific market...
-
Production of molds for processing thermoplastics and thermosets from Linaset a.s.
- 28.09.2020
- Plastics Moulds
- Injection molds
On the one hand, more than 50 years of production tradition, on the other, state-of-the-art machinery and construction software. This is the production of injection and direct molding molds for the processing of thermoplastics, thermosets, BMC and SMC at Linaset. The company is able to produce...
-
New in hot runner technology from HRSflow
- 25.09.2020
- Machinery & Equipment
- Hot runners
Precise control of the hydraulic needle drive, wear-resistant design for abrasive plastics, high-quality injection molding of foils. HyFlow, the recently introduced needle opening and closing speed control technology in hydraulically operated cylinders, is available as a complete or - if used on...
-
New hollow shoulder FANUC for full production productivity
With the R-2000iD, the FANUC introduces the hollow arm and smaller installation dimensions into its best-selling R-2000 series. This makes the iD series ideal for all applications that require process cables, such as spot welding or material...
-
ENGEL presents next generation all-electric e-mac injection moulding machines
In October 2020, ENGEL is presenting the next generation of its all-electric e-mac injection moulding machine series in a challenging application for the manufacture of pipette tips. Offering maximum flexibility for individual customer requirements, the e-mac is now even more...
-
A completely different drying of materials with UltraDryer from A.M. spol. s r.o.
- 22.09.2020
- Machinery & Equipment
- Peripherals
For decades, dry air drying with a two-cartridge or rotor dehumidifier has been considered the only correct approach to drying hygroscopic materials. 13 years ago, Maguire launched a three-chamber LPD rotary dryer on the plastics market. The material is not dried in a stream of dry air, but in a...
-
METROVAC SG – the compact solution for small conveying systems
- 21.09.2020
- Machinery & Equipment
- Conveyors
For standard conveying applications, motan's new METROVAC SG conveying station offers an optimal and inexpensive solution for smaller conveying systems. Consisting of a vacuum blower, a control and a cyclone dust filter, up to 8 hopper loaders can be connected to the PLC...
-
The company PROFING Piešťany advises how to choose the right wire straightener
- 18.09.2020
- Machinery & Equipment
- Peripherals
Wire straightening is a process that goes back to the essence of steel production technology. In short: when the steel cools, various grains (crystals) are formed and various defects at their borders. During wire forming and production, these are transformed differently, and different stresses and...
-
Plastic variable flow regulators type RVPK from the company FORT - PLASTY s.r.o.
When implementing industrial ventilation systems, possible economic savings during the operation of the installed ventilation system are increasingly taken into account. One of the most effective ways to save significantly is to regulate the system properly. The most common control elements include...
-
ant s.r.o. represents electrofusion welding of pipes
- 14.09.2020
- Machinery & Equipment
- Welding of plastics
Electrofusion welding is a method of joining plastic pipes with the help of special fittings (electric fittings), which have a built-in resistance wire. With the help of an electric current from a welding machine for electric fittings, the resistance wire heats up and melts the mass of the fitting...
-
MOL Group and Meraxis will work together to produce recycled plastics
The Swiss Meraxis business group and the leading Central European integrated oil, gas and petrochemical group MOL have entered into a strategic partnership focused on the development and production of recycled polyolefins. The goal is to develop and produce high quality materials based on recycling...
-
The first post-crisis Technical seminar Granic organized by VALPLAST CZ
This year's seminar, which took place on September 3, 2020 in Brno, was attended by about 40 guests. The aim of the seminar was to present the wide possibilities of using mineral masterbatches of the Granic brand, especially in the production of foils. The company VALPLAST CZ presented specific...
-
Antibacterial wall coverings PALCLAD Pro HYG
The PALCLAD PRO HYG tiling system offers a practical and ideal solution for wall cladding where high demands are placed on hygiene (they eliminate the deposition of microbes). The boards are suitable for lining large areas, in hospitals, pharmaceutical facilities or, for example, in the food...
-
New mobile cleaning laser ROD 1000W from Narran s.r.o.
The biggest novelty of Narran s.r.o. is a new mobile cleaning laser ROD with a power of 1000W for 2020. The laser is equipped with a special fiber resonator, which allows cleaning without damaging the surface and handles a really wide range of unwanted materials from greases and greases through...
-
ŠKODA AUTO has invested 32 million euros in a production line for ENYAQ iV in Mladá Boleslav
- 03.09.2020
- Automotive
ŠKODA AUTO has completed the reconstruction of the production line for the production of MEB vehicles at its main plant in Mladá Boleslav, which has been underway since last summer. Among other things, modifications were made in the area of building statics, conveyor technology and final assembly....
-
WITTMANN BATTENFELD presents its highlights digitally
Since FAKUMA 2020 has been postponed to next year due to the health risks arising from the SARS-CoV-2 virus, WITTMANN BATTENFELD has decided to present the exhibits originally planned for the Fakuma and several other interesting applications in the form of product videos, and post them on a...
-
LANXESS launches bio-based prepolymer line Adiprene Green
- 31.08.2020
- Suppliers of raw materials
- Bioplastics
- Rubber
LANXESS has developed a new range of MDI polyether prepolymers containing renewable raw materials. Marketed under the brand name Adiprene Green, the products are suitable as replacement for existing fossil based polyether prepolymers and allow the PU processor to produce components with a reduced...
-
The beginning of the summer did not bring a turnaround in the development of vehicle production in the Czech Republic
- 27.08.2020
- Services
- Automotive
Despite the gradual restart of the market, the production of motor vehicles is still well below last year's level. From January to July, a total of 589,339 motor vehicles were produced, ie 29.7% less than in the first seven months of last year. The development of production reflected the...
-
Sensoneo received a prestigious grant of € 1.368 million from the European Innovation Council
The Slovak technology company Sensoneo, which develops and provides revolutionary solutions for efficient and transparent waste management, has succeeded in the pan-European EIC Accelerator call focused on innovative technological projects supporting the objectives of the European Green...
-
KraussMaffei extends sales cooperation with Luger in Austria and Hungary
KraussMaffei Austria, a national subsidiary of the Munich-based KraussMaffei Group, is extending its sales cooperation for KraussMaffei-brand injection molding machines with the Austrian family-owned company Luger GmbH. The cooperation will start on September 1,...
-
Quality advertising starts in 3PLAST
- 20.08.2020
- Services
- Plastic products
The company 3PLAST s.r.o. has been operating on the Slovak market since 2007. The main credo of our company is "SUCCESS", not only in terms of personal and professional growth of our employees, but the greatest success for us is customer...
Branch Dictionary
