Current News Articles - page 82
Daily updated information and news from the plastics industry.
-
RubPlast EXPO - the most dynamic sector
- 25.10.2010
- Services
After the success of last year's trade fair industry and rubber industry, plastics RubPlast EXPO Expo Silesia continue in preparation for the third edition, which will be held from 17th to 19th November. Already, the state of applications exceeds the number of exhibitors last year's event and...
-
Innovation Compass shows the direct path of the highlights of the fair K 2010 Düsseldorf
- 22.10.2010
- Services
Fair K 2010 by the widest and most comprehensive range of products and innovations. In fact it can not overtake any other trade fair plastics and rubber industry. With a high degree of internationality of three thousands of exhibitors, who will be the 27th time October to 3 November present at the...
-
Analysis of injection plastic parts with metal inserts and analysis of two chamber injection
- 21.10.2010
- Services
Simulation analysis focused on injection molding helps to improve the quality of plastic products and manufacturing tools. Simulations also means shortening the preparation of new products to market and thus the final reduction of financial costs associated with new projects. Simulation programs...
-
New Technique for Cleaning of Plastic Regrind Materials – Kongskilde’s Air Wash system
- 17.10.2010
- Machinery & Equipment
- Conveyors
- Peripherals
Kongskilde, the well-known producer of equipment for pneumatic conveying systems for industrial purposes, has developed a new system for combined conveying and cleaning of plastic regrind materials by cleaning it effectively from dust and light particles. The system reduces the processing costs and...
-
MAGNUM ® ABS from RESINEX Resinex Czech Republic Ltd.
- 13.10.2010
- Suppliers of raw materials
- ABS
Company RESINEX Czech Republic Ltd. . has been operating on the Czech market for over ten years and during that time was able to establish itself as the most reliable supplier of thermoplastics, elastomers and additives. RESINEX belongs to the Belgian group Ravago, which has over 4,000 employees....
-
PlasticForum 2010
- 08.10.2010
- Services
Plasticforum 2010, prepared by SLOVAK PLASTIC CLUSTER with NADSME to promote cooperation, increase competitiveness and economic growth in the Slovak and Hungarian firms have met with very positive feedback from workshop...
-
Energy savings in the process of injection - a seminar of company ARBURG ltd.
- 06.10.2010
- Machinery & Equipment
At Tuesday, 28.09.2010, in hotel Impozant in Valcianska valley near Martin, ARBURG organized the thematic seminar focused on energy savings in the process of injection, automatization and preventive maintenance of...
-
NATUR-PACK, education, and responsible persons under the packaging law
- 26.09.2010
- Plastics recycling
Issuing organization NATUR-PACK, and offers its clients free environmental advice to the extent of the packaging. In daily communication with clients responding personnel authorized organization NATUR-PACK, as on many issues related to waste, payments to the Recycling Fund, the obligations of the...
-
Slovak Willmark created a new speed record
- 21.09.2010
- Machinery & Equipment
Large-scale digital printing is an important segment of advertising. The ability for rapid production and implementation of the contract is crucial for the printer. Willmark showed that 100 billboards to print in less than three hours is no longer a problem even in...
-
Preliminary Final Report and Photo of MSV Brno 2010
- 20.09.2010
- Services
International engineering trade fair presentations byl AGAIN largest industrial space technologies in Central Europe. Its scope, the large number of business dealings led many now directly on the spot confirmed the contract closed nastupující reviving the economy. Exposure exhibitors occupying All...
-
Every hour with sudo start packing line model
- 13.09.2010
- Plastics packaging
Complete packing line equipped nejmodernějšími technologiemi View online you can have in živém pavilion G2 transmission of MSV in Brno. The Packaging Project unikátního Live šestnáct involved with supply...
-
Large boards Fundermax-optimal material for facades and balconies
- 10.09.2010
- Plastics and Rubber products
MAX Exterior building a high quality product that takes Orme uses a large flat plates specially for large format tiles and facades of the balcony dlouhá life. MAX Exterior boards are high-pressure laminates of plastics tvrditelné of heat (HPL), EN 438-6, type EDF. Pressed forward under a lot of the...
-
ENVI-PAK encourage separate collection systems in towns and villages close to EUR 8 million
- 09.09.2010
- Plastics recycling
Municipalities, which receive the authorized funds directly to organizations, is already more than...
-
Radiation síťování - a recipe for improving the tribological properties of injection molding parts polymerních
- 07.09.2010
- Services
- Radiation technologies
Areas with many shops nahrazují others plastics materials such as metals, are almost all kinds of drives. Plastic is a material suitable for production of gear wheels, bearing bushes or of other sliding elements. Lightweight and Cheap to manufacture parts located in office machines, in automobilech...
-
Nitra plastic with a loss of 2.4 million. EUR
- 06.09.2010
- Plastics and Rubber products
Nitra sculpture company, which manufactures plastic products, reported a first half loss of 2.4 million. million. The year-over management to a worsening of 472.2 thousand. million, whereas during the same period last year the company reported a negative 1.9 million. million. The decrease was also...
-
Moldex3D/eXplorer - gateway to the world of 3D simulation of plastics injection molding
- 05.09.2010
- Services
Creep cavities form in the melt is a complicated process. Especially in parts of proměnnými thickness walls ztěží odhadnout there is possible to just one by the mold cavity where a report accompanied by a defect in mohou vzniknout dilemma. Design of plastic parts are today still složitější and...
-
Looking for a highly durable construction material offering long life and reducing downtime?
Polymer VICTREX ® PEEK ™ is a worldwide one of the toughest thermoplastics. You'll love its resistance to aggressive environments and high...
-
Solutions imbalance in the influx of bitter
- 30.08.2010
- Plastics Moulds
Balance of the bitter influx vstřikovacího proposal is part of the system. Company Thermoplay ensures that Her bitter influx systems are always balanced, and that applies to mnohodutinových It also vstřikovacích...
-
Fair VIENNA-TEC 2010 - waiting for the Slovak and Czech visitors in Vienna from 12 15 October 2010
- 24.08.2010
- Services
In the near future will open doors to international industrial exhibition VIENNA-TEC, which takes place every two years and offers the opportunity to see in one place under one roof six specialized industrial trade fairs AUTOMATION AUSTRIA (automation), ENERGY-TEC (energy), IE ( industrial...
-
Flexible planning and production control as a strategy for Growth during Economic Crisis
- 19.08.2010
- Services
Every business manager výrobního surely knows that his products Competitiveness depends on ukazatelích doubt, as is productivity, quality of production or level of services provided, ideal Already at the very beginning of choosing the appropriate concept of production...
-
Slovnaft completed one of the most significant overhaul in the past 10 years
- 18.08.2010
- Suppliers of raw materials
Slovnaft in the second quarter showed a good performance, despite the planned overhaul and technical indents. Although the group in the first half ended with an operating loss of management - 5.8 million. million, of which in the second quarter - three million. euros, but in June, after the...
-
The pilot training program for injection molding adjuster - the first part of testing successfully completed
- 11.08.2010
- Services
The project Improvement of Vocational Education in Field of Injection Moulding (EDMOULD) - Improvement of vocational training in the field of injection molding - LLP/LDV/TOI/2009/SK/93100534) Lifelong Learning Programme, Leonardo da vineyard - Transfer of...
-
BASF and Renova Stroygroup participate in the plan, the Russian government to reduce energy consumption by 40% by 2020
- 09.08.2010
- Suppliers of raw materials
+ + + The planned construction of a new urban quarter to 325,000 people in Ekaterinburg + + + The use of insulating material Neopor ® + + The complaint was based on the German-Russian government consultations + +...
-
Bayer second-quarter increases in revenue and profit
- 30.07.2010
- Suppliers of raw materials
Bayer Corporation has once again been an increase in sales and profits in the second quarter of 2010. "Subgroup MaterialScience overcome the crisis, experiencing even greater growth in trade, as expected. Volumes returned to pre-crisis level, "he said Thursday after the publication of the...
-
MSV 2010 Together with Technology Fairs
- 29.07.2010
- Services
Souběžně the 52nd international engineering and seventh veletrhem International veletrhem cutting and shaping machines for IMT Brnenský Exhibition pass off even more next three specialized technological fairs: 13 international foundry trade fair FOND-EX 20 International Welding Engineering Fair and...
-
PMMA Altuglas ® by the company RESINEX
Company RESINEX pùsobí Canada Ltd. in the Czech market via ten flight and in that time managed to establish itself as with maximally Reliable supplier of thermoplastics, elastomers and...
-
Willmark chosen the way of quality
- 19.07.2010
- Services
One of the most visible effects of the crisis with which we meet today in business is the pressure on...
-
BASF brings new lightness into furniture
- 16.07.2010
- Suppliers of raw materials
With material Kaur Light ® from BASF is a material for modern interior design for 30 percent...
-
Polystyrene concrete from Agrostyro Ltd.
- 14.07.2010
- Plastics and Rubber products
AGROSTYRO Company Ltd. offers a thermal spádovaciu concrete-based mortar made of expanded polystyrene and cement. Polystyrénbeton a new trend in...
-
Cooling Application forms konformního cooling
- 12.07.2010
- Plastics Moulds
In vstøikolisových forms are now commonly used drilled cooling channels. Ensuring optimum cooling mold cavity is very hardened by many, not only with the shape ohledem složitost mold cavity, but often with the space necessary for the conduct of cooling channels located also included a kick-off...
Branch Dictionary
