Current News Articles - page 9
Daily updated information and news from the plastics industry.
-
ENGEL supplies two 8,000-tonne injection molding machines
- 03.03.2023
- Machinery & Equipment
- Injection molding machines
Austrian injection molding machine manufacturer ENGEL has set a new record with two injection molding machines delivered to the USA. With a clamping force of 8,000 tons each, they are the largest machines ever built at the St. Val- entin plant in...
-
Ampacet introduces ELTech™ masterbatches for E&E market
- 01.03.2023
- Suppliers of raw materials
- Additives for plastics
Ampacet, a global masterbatch leader, has launched the ELTech™ product range, specifically formulated to respond to the stringent requirements of the E&E...
-
Emission standard Euro 7/VII: high costs vs. negligible benefits
- 24.02.2023
- Services
- Automotive
The draft of the new Euro 7/VII emission standards will have a fundamental negative impact on vehicles with a combustion engine and their availability. At the same time, it will drain much-needed resources for investments in the development of electric...
-
MSV 2023: A unique opportunity for the presentation of new industrial technologies, products and services
- 22.02.2023
- Services
- MSV Brno
- Exhibitions
How is the industry ready for the digital era? Which technologies will help increase energy efficiency and save costs? What new business opportunities does the changing world bring? Tens of thousands of professional visitors will be looking for answers to these questions in Brno from October 10 to...
-
Do you need waste management in your company in accordance with applicable legislation?
- 20.02.2023
- Services
- Waste Management
PRÁKA CERTIFIKAČNÁ s.r.o. provides comprehensive services in the field of certification of construction products, plastic products, petroleum products, rubber, road salt and technical foils according to ISO/IEC 17065:2012. Prva certificačná also deals with waste management according to the...
-
OPTIK INSTRUMENTS presents new technologies in mobile FTIR spectrometers
- 17.02.2023
- Machinery & Equipment
- Testing of plastics
Nowadays, FTIR spectrometry is a widely used analytical technique for both qualitative and quantitative analysis, and it finds application in e.g. wherever it is necessary to identify substances, control their quality or determine their...
-
ALFA CHROM servis invests in the future: expanded production facilities and new Demag cranes
- 15.02.2023
- Plastics Moulds
- Maintenance of injection molds
"Demag cranes are our investment for the future," says Aleš Koutný, CEO of ALFA CHROM servis. The company ALFA CHROM servis, which mainly deals with the repair of molds for the automotive industry, has doubled its production facilities over the past year and equipped them with a pair of new Demag...
-
Mikron MILL P900: The best solution for tool shops and manufacturers of precision parts
- 13.02.2023
- Plastics Moulds
- Toolmaker
- Injection molds
GF Machining Solutions is a leading supplier of machine tools and automation solutions. It focuses on mold makers, tool makers and precision parts suppliers. Therefore, it has included in its offer the Mikron MILL P 900 with a portal frame made of mineral concrete, which will provide you with a...
-
PENTA - servis spol. s r.o. will help you reduce the cost of packing goods - even a small change can mean a big saving
- 10.02.2023
- Plastics packaging
- Packaging
The economic crisis and the rise in prices associated with it affects everyone, not only households, but also companies, where costs climb to astronomical figures, primarily due to high energy prices. Based on this, many companies try to save where...
-
How does Stepanek3D use powder technologies for polymer sintering?
- 08.02.2023
- Services
- 3D technology
- Research
In this article, we will focus on polymer powder sintering technologies that are popular mainly in industry and functional applications due to, among others, their versatility, availability, speed of delivery and other aspects. We will also explain standard delivery dates, prices, materials, sizes...
-
Biopolymers: New application possibilities in electronics and electrical technology through radiation crosslinking
Products in the electrical technology and electronics (E&E) industry have to meet high flame retardant standards and often demanding thermal requirements. Polymers available on the market so far do not meet these...
-
At the K 2022 in Düsseldorf grew up a green world : arburgGREENworld
Fair K in Düsseldorf is the most important information and business platform in the field of plastics and rubber industry. At the last event in October 2022, 3,300 exhibitors from 69 countries presented themselves. A whole range of current trends and innovations was presented. Among the most...
-
Despite the extensive challenges of 2022, a total of 1.25 million were produced in the Czech Republic. vehicles
- 30.01.2023
- Services
- Automotive
The year 2022 was filled with many difficult challenges for the Czech automotive industry. Despite the ongoing shortage of semiconductors and other components, the war in Ukraine, difficulties in production and logistics chains, a total of 1,249,281 road vehicles of all types were produced between...
-
Half time of Slovak electromobility. How will it turn out?
- 25.01.2023
- Services
- Automotive
- Electromobility
According to preliminary results, Slovak car manufacturers produced approximately one million cars in 2022, which is a slight decrease of less than 5 percent compared to the previous year. Next year, according to estimates, the production oscillation will continue at the level of around one million...
-
TRANE ČR: Heat pumps of the affiliated company ICS Cool Energy reduce heating costs by 68%
TRANE, an international market leader specializing in complete temperature control and regulation solutions for manufacturing processes and other applications, has replaced a fossil fuel heating system with a new "Free-heating" (i-FH) industrial heat pump rental solution in the manufacturing...
-
GLOBAL RECYCLING a.s. is clear about that! Recycling makes sense
- 20.01.2023
- Services
- Circular economy
- Recycled plastics
Today, almost all of us perceive the recycling of glass, paper or plastics as a matter of course. We are less experienced that it should be the same with electrical equipment, even if this statement is not 100 percent true. We probably wouldn't try to throw an old washing machine, television or...
-
The worldwide packaging competition WorldStar Packaging Awards 2023 knows the winners
- 18.01.2023
- Services
- Awards
- Plastic packaging
A record number of packaging solutions were registered this year. 488 applications for various packaging solutions arrived from 44 countries around the world. The Czech Republic received 9 and Slovakia 2...
-
A.M. spol. s.r.o. - Drying of moist materials with dry air vs. in a vacuum
Conventional dryers working on the principle of drying the material with dry, heated air have a long-term completely privileged position in the processing of moist plastics. The proven system of the drying unit as a source of dry air with drying power differs among many different manufacturers only...
-
The number of new vehicle registrations in the Czech Republic in 2022 significantly marked their overall lack on the market
- 13.01.2023
- Services
- Automotive
The year-on-year decrease in new vehicle registrations was most pronounced in the categories of passenger cars and light commercial vehicles. The demand for new vehicles was significantly higher than the possibilities of their delivery. There was a decrease of 7.15% for passenger cars, and 14% for...
-
ORLEN Unipetrol has integrated the REMAQ recycling company into its group and is preparing a comprehensive waste recycling solution
- 11.01.2023
- Plastics recycling
- Recycled plastics
The ORLEN Unipetrol Group continues to meet its strategic development objectives by 2030. Within this framework, it also focuses on the principles of circular economy and permanent sustainability. It develops these by building a broad portfolio of recycling activities, thanks to which it will be...
-
Six reasons, why to invest in new plastic windows
- 09.01.2023
- Plastics and Rubber products
- Plastic products
The current energy crisis forces many to think more about the possibilities of savings in the home. The demand for energy-saving sources, such as heat pumps or photovoltaics, is still growing. However, interest is also growing in heat-insulating windows, because up to 50% of the heat can escape...
-
Jevons paradox and JSW injection moulding machines
Plastic producers in the Czech and Slovak Republics are under enormous pressure. Inlection moulding plants are caught in the grip of technological conditions, when it is no longer possible to reduce costs with technology and the price of inputs goes against the trend of cost reduction. The price of...
-
Panattoni sustainable buildings – a significant advantage for the automotive industry
- 02.01.2023
- Services
- Circular economy
- Cost savings
The main trend for almost the last decade has been the gradual transition from combustion engines to electric ones. In addition to the change in driving parameters, the primary reason for this change is the reduction of the carbon footprint. Billions of cars in the world have helped push it to an...
-
Electromobility in 2022 in Europe but also in the world
- 31.12.2022
- Services
- Automotive
- Electromobility
The European Automobile Manufacturers’ Association (ACEA) has analysed the trends and developments in battery electric vehicle (BEVs) markets. While China is currently ahead of Europe and the US in the electrification of the car market, the European market will rebound in 2025 and take the lead...
-
How to choose the right sludge pump
- 29.12.2022
- Machinery & Equipment
- Control technology
Měli jste už vodu ve sklepě nebo uvažujete nad koupí čerpadla domů či na chalupu? Kalová čerpadla patří mezi nejpoužívanější pomocníky na čerpání vody. Můžete jimi čerpat dešťovou vodu, fekálie, stavební, průmyslové a zemědělské kaly a kapaliny s obsahem různých nečistot. Výběru čerpadla, které...
-
Despite the slight drop in November car production back to pre-crisis production values
- 27.12.2022
- Services
- Automotive
The production of passenger vehicles jumped by 9.3% year-on-year to a total of 1,118,639 units in the first 11 months. In November itself, however, there was a slight decrease in the volume of production (-4.6%, i.e. 118,264 units). This was mainly caused by the persistent shortage of some parts...
-
Addiplast: Eco-development for better recycling
Addiplast Group develops its own innovation strategy in the field of packaging materials and supports sustainable development and recycling. The Addicolor manufacturing plant has already designed 5 products that are part of the sustainable assortment and are detectable using near infrared radiation...
-
ENGEL launches Pay per Use: New usage model offersmore flexibility and assurance
ENGEL breaks new ground in injection moulding machine distribution. Blazing a trail for its industry, the machine manufacturer now offers its customers a pay-per-use model on top of classical machine purchases. This helps proces-sors to reduce their investment risk while at the same time boosting...
-
Fotoreportáž z 11. ročníku odborných seminářů Trendy v plastikářském průmyslu 2022
- 16.12.2022
- Services
- Events
- Photo reportage
On November 22-23, 2022, the 11th professional seminar from the series "Trends in the Plastics Industry" took place in Demänová at the Via Jasná hotel. In 2021, due to pandemic measures, the seminar was organized online. Therefore, the participants welcomed the opportunity to meet again in person,...
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
Upcoming Events
17.07.2024 - 19.07.2024 | Beijing
17.07.2024 - 20.07.2024 | Surabaya
17.07.2024 - 19.07.2024 | Guangzhou
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024