Current News Articles - page 78
Daily updated information and news from the plastics industry.
-
High speed gantry machines GF AgieCharmilles, Mikron HSM / XSM - machines with the best working approach
- 29.07.2011
- Machinery & Equipment
When in 1994 the company entered the market with Mikron machining centers, which proved to work only with high speed, but also offered the same high rate shifts, making it one of the founders of HSC technology, namely high-speed...
-
Open Day in the educational center for the adjustment of injection molding
- 27.07.2011
- Services
Company Mapro Slovakia, sro and A-OMEGA, Ltd. was organized on 12.7.2011 in Orovnica the third time the Open Day, the educational center of Mapro Slovakia, sro, which is the fifth year of practice prepared by injection molding...
-
Sequence controller from Thermoplay
- 25.07.2011
- Machinery & Equipment
Formation of injection molding processing is the most important of all commercial methods. It was developed by a number of options and one of them, rapidly expanding, is forming a sequence controlled...
-
Heating with a new high-performance heating layer: Jets are now slim, have more power and are more economical
- 22.07.2011
- Plastics Moulds
Heisskanaltechnik Günther GmbH has introduced a new, powerful and energy efficient technology BlueFlow © nozzles first to K2010 in Düsseldorf. These nozzles are all new heating system other than a thick, rigid and large energy...
-
EUROPEN - the amount of packaging waste decreases
- 20.07.2011
- Plastics recycling
A new report by the Organisation Europen (The European Organisation for Packaging and the Environment), based on official data published by the European Union, informs about the success of the recovery and recycling of packaging waste and reducing the amount of packaging sent to...
-
Styron and RESINEX concluded a strategic partnership for the distribution of plastic granules for the electrical and lighting industry
Strategic partnerships with pan-European distributor - the company strengthens its position RESINEX Styronu market E &...
-
ENVI-PAK, together with the visitors of the festival Pohoda created a huge eco-footprint
- 13.07.2011
- Plastics recycling
Everyone's behavior leaves an indelible on earth ecological footprint. ENVI-PAK, together with State Secretary of Ministry of Environment Branislav Cimerman invited visitors to the festival, so instead of leaving footprint on nature to create a symbolic Pohoda eco-footprint by using their hands or...
-
General Plastic Ltd. Kolárovo evaluate annually 12 000 t of PET bottles
- 11.07.2011
- Plastics recycling
In Slovakia, the annual production of approximately 40,000 tons of PET waste, especially PET bottles, of which about 40% are collected. Most of the collected PET bottles - about 12 000 tonnes annually, evaluate the largest domestic processor General Plastic Ltd. Kolárovo. The company now belongs to...
-
Meeting members of the cluster of plastic Slovak
- 08.07.2011
- Services
On 06.22.2011 in the meeting of Uhorska Ves (district Liptovský Mikuláš) in the company Esox,s.r.o. Slovak members of the cluster of plastic...
-
Polyamide 6 meets the highest criteria for new standards for fire protection of railway vehicles
- 06.07.2011
- Suppliers of raw materials
Leverkusen - The forthcoming European standard for fire protection of railway vehicles imposes very strict requirements for the use of refractory materials. High-tech plastic polyamide 6 Durethan DP BM 65 x FM30 from LANXESS not passed the test preparation with the highest possible standards of...
-
The introduction of new practices Polytechnic Secondary School pupils - COP Zlin in plastics and rubber companies
- 04.07.2011
- Services
The second study and work placements for pupils at the school as a project partner DPlast Zlín Zlín Precision sro...
-
Radiation Shielding Lead-free solutions for a better environment
- 01.07.2011
- Suppliers of raw materials
PolyOne has launched a new generation of special plastic-metal composite materials under the trade name Grave-tech and medical applications called TrilliantTM Healthcare Radiation Shielding...
-
06E “Plug ‘N Play”® threaded nozzle and bolt-on valve gate actuator
- 24.06.2011
- Plastics Moulds
SYNVENTIVE introduces new 06E “PLUG ‘N PLAY”® hot runner system feturing threaded (screwed- in) Nozzle and bolt-on valve gate...
-
Construction tips of company Strack Normalien
- 22.06.2011
- Plastics Moulds
As every year, even now the company Strack Normalien enlarges its catalog offers with new or improved components, such as following two new...
-
Technological innovations in injection molding for parts with large dimensions
- 20.06.2011
- Plastics Moulds
Company Thermoplay SpA has developed a new hot runner system for molding parts with large dimensions, such as bumpers, spoilers, racks for car body and trucks, but also large parts in home electronics industries and variety of packaging...
-
LANXESS to exceed EUR 1 billion EBITDA in 2011
- 17.06.2011
- Suppliers of raw materials
Leverkusen – The specialty chemicals company LANXESS will exceed the EUR one billion EBITDA pre exceptionals mark in 2011 after achieving its best-ever quarterly result in the first quarter. EBITDA pre exceptionals rose 38 percent year-on-year to EUR 322 million, with all segments and regions...
-
Corporate Presentation Days for plastic injection molding systems Ltd.
- 10.06.2011
- Machinery & Equipment
Increasing demand for energy-saving machines brought to the Czech and Slovak market new fully electric and hybrid machines Woojin Selex Korean manufacturer. These machines were introduced for presentation on the company for plastic injection molding systems...
-
Long fiber reinforced thermoplastics in portfolio companies RESINEX
Long fiber reinforced thermoplastics Celstran FACTOR ® and ® are manufactured by Pultrusion Technology, which provides complete coverage of each polymer...
-
New polycarbonate for LED lighting
- 06.06.2011
- Suppliers of raw materials
Bayer MaterialScience has developed new types of transparent Makrolon ® for the growing use of LEDs (light emitting diodes) for innovative light sources. Significant use is for lenses, focusing and guiding light emitted by an...
-
Photoreport from MSV 2011 exhibition in Nitra
- 03.06.2011
- Services
We bring you a brief photo report of 18th anual International Engineering Fair in Nitra and the 4 thematic exhibitions which were part of the fair: EUROWELDING - 17th International Exhibition Welding and welding technology,CAST-EX - 17th International Exhibition Casting, metallurgy, and...
-
Polycarbonate Backlit Panels RODECA ®
- 01.06.2011
- Plastics and Rubber products
RODECA PANEL Perforated plate thickness is 40mm internal štvorstennou, šesťstennou, sedemstennou (or at hr. 50 mm 10-Stennis, U = 0.83 W/m2 K, and the hr. 60 mm with 12-Stennis, U = 0.71 W / m2.K) structure. Board are provided with interlocking tongue and groove system that allows interconnection...
-
SEPRO Robotique from Kuboušek Ltd., a division of KraussMaffei
- 30.05.2011
- Machinery & Equipment
SEPRO French company is a leading manufacturer of automation for injection molding machines, which shipped more than 20,000 worldwide robots and is market leader in Europe. Primarily focuses on the automotive industry, but due to increasing demands on the technological level of production projects...
-
Level sorting of waste in cities and towns in Slovakia
- 27.05.2011
- Plastics recycling
How is separated in cities and towns in Slovakia? Koľko waste is actually in the towns and villages through the selective collection...
-
Orientation CADMOULD ® EXPRESS from Gabriel Plastics Ltd.
- 25.05.2011
- Services
Orientation CADMOULD ® EXPRESS calculated orientation of fibers in the plastic part and place it into the software Ansys ® and Abaqus ®. CADMOULD Orientation EXPRESS ® is a software bundle of two modules: CADMOULD ® Converse ® CADMOULD and to calculate the fiber...
-
Prague exhibition area Letňany lived with industry during 3 May days ....
- 23.05.2011
- Services
Simultaneous presentation of three closely consecutive key industry combines the longer tradition of holding fairs spring with the industrial theme in Prague. This year the fair presented from 3 to 5 May: FOR INDUSTRY - 10th international exhibition for industry FOR SURFACE - 6th International...
-
7 th. exhibition of recycling and waste management PRO EKO
- 20.05.2011
- Services
From 3 to 6 May 2011, in Banská Bystrica conducted exhibition events FOR ARCH - N14. Exhibition Building, FOR EKO - 7 Exhibition of recycling and recovery on for the region - 10 exhibition of regional development and tourism. Exhibition space 5 000 m2, which were presented to 161 exhibitors from...
-
PlasticPortal.eu celebrates second birthday
- 18.05.2011
- Services
In May 2009 there was launched a new portal in Slovakia, to provide comprehensive information from plastics industry in one place. You can find plastics processors, manufacturers and distributors of plastic products and intermediate products, raw material suppliers, machinery, technologies,...
-
Universal frame molds for prototypes and small series
- 16.05.2011
- Plastics Moulds
- Design of molds
- Standardized parts
K3500 Universal frame forms developed by HASCO, meets all requirements for the production of samples, prototypes and production in small quantities at low cost. It consists of a frame form in dimensions 156x196 mm, 246x296 mm, 296x396 mm and shaped inserts K3520 / K3501 and ... / ... with built-in...
-
Piovan INTRODUCES GENESYS - NEW GENERATION TECHNOLOGY IN DRY PET
- 13.05.2011
- Plastics Processing
Drying of PET material is increasingly an integral part of the process of transformation and has become an indispensable and crucial step. New application with PET material acceptable from an environmental perspective, modified PET for extrusion and blow molding, increasing production capacity of...
-
Cryogenic Shot Blast Deflashing. What it can and cannot do?
- 11.05.2011
- Machinery & Equipment
Cryogenic high speed shot blast deflashing is a process used by the rubber industry to remove flash from molded rubber parts. The process uses liquid nitrogen, high speed rotation and media (shot blast) in varying combinations to remove the flash in a highly precise, economical and expedient...
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
Upcoming Events
17.07.2024 - 19.07.2024 | Beijing
17.07.2024 - 20.07.2024 | Surabaya
17.07.2024 - 19.07.2024 | Guangzhou
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)