Current News Articles - page 70
Daily updated information and news from the plastics industry.
-
The LiCEA project will boost the energy savings of Slovak SMEs
The new LiCEA project will be implemented in Slovakia. It will focus on SMEs in plastic industrial sector. The principle of project lies in determination, implementation and long-term usage of Life Cycle Energy Audit. Relevant SMEs can participate and catch the benefits of energy saving...
-
Polyamide TechnylStar ® from RESINEX to increase product quality
- 10.07.2013
- Plastics Processing
- PA Polyamide
RESINEX Czech republic s.r.o. is a polyamide TechnylStar® for excellent surface quality of injection molded parts, exceptional fluidity and possibility of high performance glass...
-
Fasteners Poppit ® for even faster processing
- 08.07.2013
- Plastics and Rubber products
Quick and efficient installation and removal of panels as well as wall and ceiling cladding is a big challenge for fastening technology. The Poppit® fastening system is the solution for this. Through concealed fasteners and the perfect “click” technology, covers can be fastened without visible...
-
Successfully achieving recycling of MSW in Slovakia by EEA
- 04.07.2013
- Plastics recycling
The European Environment Agency (EEA) released in February 2013 on municipal waste management in Slovakia, which assesses the current state and direction of waste...
-
Direct injection of long fibers: new opportunities for the production of stronger, lighter plastics
- 02.07.2013
- Plastics Processing
- Injection molding machines
In general, the longer the fibers are injected, the better mechanical properties of the moldings receive. Direct injection of long glass fibers, however, until recently, could not be made due to the limitations of the material preparation and dosing, but also for the nature of the granules. You can...
-
Interflon Czech s.r.o.: Improvement the characteristics of hydraulic fluids with Teflon ®
- 01.07.2013
- Machinery & Equipment
Hydraulic systems have a unique place not only in industry but also the entire scale non-manufacturing activities. According to its specialization hydraulic systems require different types of high quality hydraulic fluids, which must meet a number of important requirements, such as the ability to...
-
STU developing unique technologies for the regeneration of used oils, research is helping to employ people in the company
- 28.06.2013
- Plastics recycling
Scientists Slovak University of Technology have developed a unique technology for the treatment of motor oils. Thanks to technology there is no need to burn oil, it can be regenerated and reused. Technology began using commercial company in eastern Slovakia. The protected utility model are also...
-
Thermal infrared cameras Optris PI from Hotset CR s.r.o.
- 27.06.2013
- Machinery & Equipment
Are you looking for reliable infrared thermal imager? Need a thermal imaging camera with its lens? See offer powerful thermo cameras brands Optris, which brings the company Hotset CR...
-
Project Don´t fall off from waste at Envirofilm 2013
Between 3 to 8 June 2013 was held on 19 international film festival on environment - Envirofilm. NATUR-PACK had presented the festival in Kosice for two days and a unique courseware "don´t fall off from waste". Directly at the festival it was possible for more than a thousand children from second...
-
Introducing Solberg SK International Ltd. - protect your vacuum pump!
- 25.06.2013
- Machinery & Equipment
Solberg SK International Ltd. is a subsidiary of a leading company in the field of filtration, acting on the world market for 44 years. Our company sells to over 65 countries...
-
New quarters for INCOE®
For INCOE® International Europe, of Rödermark, Germany, the cornerstone laying on June 12, 2013, marks the beginning of the Company’s move into facilities of its own. TFor INCOE®, the project is a decisive step toward optimising efficiencies for customers across all its...
-
KUBOUŠEK Ltd. - Equipment Division presents Digmatic micrometer Mitutoyo MDH-25M
- 21.06.2013
- Machinery & Equipment
Devices division is the sole supplier of a complete range of products, the Japanese company Mitutoyo, manufacturer of measuring instruments and machines for measuring geometric parameters and also supplier of products Italian companies Vici & C and Demmel...
-
Wittmann Battenfeld brings a new connection technology - In-Mold Internal Welding
IMIW has made it possible to overmold inserts with gas- and watertight sealing. The connection is made directly between the contact surfaces by joining the two injection-molded plastic halves from inside, using the same plastic material the parts are made of. This technology is particularly...
-
Products for cleaning and lubrication for food industry from Chem Trend
- 19.06.2013
- Services
Experience professional products for the maintenance of machines made by Chem Trend, which are suitable for the plastics industry. A wide range of pruducts helps our customers to produce quality products and provide fast and efficient cleaning machines, molds and...
-
Controlled liquid ion carbonitriding as an alternative to electroplating
- 18.06.2013
- Machinery & Equipment
CLIN group practices are modern and environmentally friendly processes for the oxidation and carbonitriding steel and cast iron. Diffusion of nitrogen and carbon leads to the layer having non-metallic character. Great advantage of this peripheral zone in comparison to other types of surface...
-
What to do with PVC flooring Fatra affected with floods?
- 17.06.2013
- Plastics and Rubber products
Answers to frequently asked questions. What to do with temporarily flooded PVC flooring? What to do in case of prolonged flooding PVC flooring? We live in a flood area, exposed PVC floor are pulled down, the substrate seems to be all right. How do I know where we can stick the new...
-
Kuboušek Ltd. comes to the global market with a new dimension: GX molding machine from KraussMaffei
- 12.06.2013
- Machinery & Equipment
The crowd of more than 400 guests echoed whisper, as the curtain opened and the view of the first machine of new generation: GX - The new dimension in injection molding. Enthusiastic professional audience, however, could see more. A total of six new series of machines with a clamping force of 400...
-
Cleaning equipment for pipes and heat exchangers from BIO-CIRCLE
- 11.06.2013
- Machinery & Equipment
Bio-Circle Surface Technology s.r.o. presents you RWR-cleaning machine for pipes, heat exchangers and condensers. Time-consuming disassembly and re-assembly of pipes will be through this cleaning technology of the past. Remove rust, oil, mineral or calcium deposits in your systems quickly and...
-
Interplastics, Ltd. offers improvements for your products
- 07.06.2013
- Suppliers of raw materials
- Commodity plastics
Produces an inexpensive compound that improves the properties of the final product. Its use is suitable for film lamination, pipes, injection molding, blow molding, and others. Improve the quality of the final product and its technical properties using...
-
In Zilina produced the first sports version of the Kia cee'd
- 06.06.2013
- Plastics and Rubber products
Kia Motors Slovakia (Kia) today launched volume production of its very first sports version of the Kia cee'd GT that complements the existing model range. The long-awaited model is produced at the plant in three-door (pro_cee'd GT) and five-door (cee'd...
-
From Research to Practice
- 04.06.2013
- Services
The project "Testing the suitability of the processing laboratory developed a biodegradable material injection technology and material preparation for operational tests in the transfer of research into practice 'solution was to transfer research results into industrial practice in the development...
-
Competence Days at Wittmann Battenfeld - Power for the future
Under the motto "Power for the Future" presented Wittmann Battenfeld guests at this year's Competence in the Kottinbrunn latest technology in the field of injection molding, automation and peripherals. That this motto is entitled to could convince ca 1,100 visitors 24 and 25 April in Kotingbrunn in...
-
Seminar gating systems of injection molds
- 30.05.2013
- Plastics Moulds
On 15 May 2013 was held in the training center MCAE Systems Seminar dealing with gating system of injection molds. The chosen theme had great interest, because shortly after the announcement that the workshop will be organized, the capacity of the training room (about 60 seats) was fully...
-
ANAMET Ltd. - a comprehensive solution for your material testing laboratory and laboratory
- 29.05.2013
- Services
- Quality control
Company ANAMET Ltd. the Czech and Slovak market with superior equipment of foreign firms (representing more than 30 companies). For all supplied equipment provides customized solutions, customer service, including the supply of spare parts and...
-
Photos from 20th International Engineering Fair in Nitra
- 28.05.2013
- Services
This year's MSV in Nitra was attended by about 400 exhibitors and co-exhibitors, representing the other 200 companies from many countries, mainly from Slovakia, Czech Republic, Austria, Germany, Switzerland, Italy, France, but also from overseas countries such as. Japan and Taiwan. Listed companies...
-
Unipetrol Group spend 213 million CZK in the Environment in 2012
Unipetrol's investment costs for the protection of the environment reached CZK 213 million last year. The largest investments were made by Česká Rafinérská (CZK 127 mil.) and Unipetrol RPA (CZK 62 mil.). At Chempark Záluží, this included, among other things, the modification of the flare system in...
-
Grass paving from the company Puruplast
- 23.05.2013
- Plastics and Rubber products
At a time when green grass areas recede asphalt and concrete, come up with the perfect solution to strengthen lawns, which has excellent technical characteristics and is very environmentally...
-
5th PMA annual conference in Bratislava
- 22.05.2013
- Services
On 23 - 25 April 2013 professionals working in the field of plastics, rubber and rubber had the opportunity to meet again in Bratislava on 5th International Conference Polymeric Materials in Automotive PMA 2013 and 21 Volume Slovak Rubber Conference SRC 2013. Organizers of the Conference of the...
-
Competence Days 2013 Wittmann Battenfeld
- 21.05.2013
- Events
- Injection molding machines
The two-day event called Competence Days, organized by the company Wittmann Battenfeld, was led with the slogan "Strength for the future." Over 1,100 visitors met in the Austrian Kottingbrunne where to acquaint themselves with technological innovations in the field of injection molding, automation...
-
Agrokomplex Nitra invites the International Engineering Fair
Exhibition Agrokomplex Nitra cordially invite you to the 20th anniversary th International Engineering Fair. The event will be held from 21.05 to 24.05.2013 at the exhibition in Nitra...
Branch Dictionary
