Current News Articles - page 67
Daily updated information and news from the plastics industry.
-
The automotive industry is strategic for Slovakia
- 07.11.2013
- Services
This sector bears attributes for several years as a core, essential, supporting. Facts that we were able to summarize just shows exceptional position automobile industry, which even supported the scientific study of experts, led by prof. Ing. Nicholas Luptáèik, PhD. from the University of Economics...
-
Strong third quarter 2013 in BASF
- 06.11.2013
- Suppliers of raw materials
BASF 3rd quarter 2013 sales increased by 1.5% to 17.7 billion euros, despite significantly negative effect of exchange rate fluctuations of currencies. This increase was primarily the result of increasing sales volumes, particularly in the segment of Petroleum & Natural Gas. Income from operations...
-
Innovative system for the exchange of injection molds made by Stäubli
Today's automotive industry production is very much determined by the growing diversity and smaller production runs. The importance of this fact is seen when looking at the production of plastic parts Faurecia. 40t injection mold here has changed several times per shift - this operation can be...
-
Easy to operate robotic system from KraussMaffei
- 01.11.2013
- Machinery & Equipment
Core competencies range from simple linear devices by type "pick & place" to complex, custom-made production unit of industrial robots, or combinations...
-
News for better results in the injection molding from SVOBODA Ltd.
- 31.10.2013
- Plastics Processing
Among the novelties SVOBODA Ltd. company presented at this year's International Engineering Fair in Brno the patented water distributors, including control valves with turbulent flow, pressure and temperature and system for preventing Diesel effect in the forms and...
-
IML: Direct gating onto touchscreen film with SoftGate®
- 30.10.2013
- Machinery & Equipment
At Euromold 2012 this presentation generated great interest: the ready-to-install operating panel fitted with touchscreen sensors, produced in a single shot at the stand sponsored by Roth-Werkzeugbau GmbH of Wiebelsdorf, Germany. INCOE valve pin speed control optimises production of a new...
-
Slovakia needs more local subcontractors
Interview with Jaroslav Holecek, president of the Association of Automotive Industry of the Slovak Republic (ZAP SR) on the current situation subcontracting automotive...
-
Final press conference of K 2013 and photogallery
High Expectations Exceeded at K 2013, Many Pioneering Innovations prompting a Remarkable Number, Exhibitors anticipate Strong Post-Fair...
-
Conclusions of the Conference of Local Government and separate collection 2013
- 23.10.2013
- Plastics recycling
More than 200 participants of the conference Autonomy and separate collection 2013 agreed that the introduction of the principle of extended producer responsibility (care manufacturer of packaging / product from the development stage to the end stage of life), which should include the forthcoming...
-
Modula: the innovative drying technology of Piovan wins at leading car maker and obtains patent
- 22.10.2013
- Machinery & Equipment
The main prerequisites at BMW, for the selection of plastic material handling systems, including conveying, drying and blending, are the evident characteristics of energy efficiency, ease of use, productivity level stability, ecological compatibility and...
-
KraussMaffei at K 2013 for the first time presenting its proven technology SpinForm the machine GX series
- 17.10.2013
- Machinery & Equipment
KraussMaffei now offers the GX-Series SpinForm multicomponent technology, including design with swivel base, which result in significantly expands the...
-
Invitations to the Messe Düsseldorf 2013
Accept the invitation to visit the exposition of some major...
-
MSV Brno 2013 - Preliminary Final Report and Photo Gallery
55th anniversary International Engineering Fair showed the quality of Czech industrial production, which maintains a highly competitive and significantly contributes to the results of our exports. The participation of leading European and world producers also testified that the Czech and Central...
-
FOR ARCH became the largest construction fair in the Czech Republic
This year's International Building Trade Fair FOR ARCH 2013, focused on the topic: "Reconstruction and revitalization", which attracted a record number of visitors. On 17 to 21 September 2013 passed through the gates of the exhibition PVA EXPO PRAGUE in Prague Letòanech 71,290 people, an increase...
-
Conformal cooling simulation and analysis Cadmould ® 3D-F
- 09.10.2013
- Plastics Moulds
Conformal cooling shortens injection cycle up to 50%. Simulation software Cadmould ® 3D-F offers Plasty Gabriel...
-
Packaging live at MSV 2013 - with new technology packed sweets
This year comes packing line Packaging Live with several innovations - is held in r npavilonu of the larger open area, wrapping presents new machine and a new robot and r nzaøazuje the production department so. manual operation. "Visitors can thus four times r ndennì see packaging and storage...
-
New brand injection molding machines - Borche
- 07.10.2013
- Machinery & Equipment
Czech Republic and Slovakia enters the new brand of injection molding machines - Borch. The new brand machines provides new opportunities for processors and injection molding. Sales of injection molding ensures a Polish company...
-
Stäubli at K-Show
Düsseldorf Trade Fair, 16th to 23rd October 2013: The Booth. 11 in Hall. 11 will be exposed the best solutions for plastics processing, including an exceptional range of products for automation of injection molding machines. When you're on the K 2013 do not forget to come see the latest innovations...
-
Letter from the Minister: Major projects to improve environmental quality
The Ministry of Environment in Slovakia is currently developing a draft Operational Programme Environment...
-
Plastic Injection Molding: Improved Part Quality and Considerable Cost Savings Result With Mixing Nozzles
- 01.10.2013
- Machinery & Equipment
- Automation
- Dosing equipment
It is well known that static mixers – so called mixing nozzles help to avoid color streaks in injection molding. Less known is the fact that mixing nozzles can be used to solve many other quality problems, improve the process stability and reduce production costs. This article provides an overview...
-
Compuplast Ltd. invites at the K show 2013
- 30.09.2013
- Machinery & Equipment
- Extrusion
Ladies and gentlemen, as a regional representative Labtech Engineering of the Czech Republic and Slovakia we would like to invite you to visit their booth at K2013. This year we increased the area to 200 m2 stand which allows us to expose more of our machines than in the...
-
Plastic fence profiles of K.O.S.-plastic, Ltd.
Thinking of an economical fence? KOS-plastic, spol. Ltd. plastic fences are beautiful, durable and lasting without any painting or similar maintenance. Fences are affordable for everyone, such as iron rust and rot like wood. Other benefits include stability, maintenance-free, UV stability and a...
-
Invitations to the International Engineering Fair MSV Brno 2013
PlasticPortal.eu ® - a media partner of the fair MSV Brno invites you to visit our stand from 7th october 2013 to 11th october 2013. You can find us in the exhibition hall. G1 / 014 Companies also publish invitations that were sent to the...
-
Maximum safety in food processing and packaging - TECAMID 6 blue ID expands portfolio detectable plastic
- 25.09.2013
- Plastics Semi-finished products
Food industry must ensure that the end product will get no contamination. Detection of foreign bodies in their own products, therefore, plays an important role in the production...
-
INCOE ® Fully assembled systems with bolt guns
- 23.09.2013
- Machinery & Equipment
Plain or screwed: That's the question constantly put designers and processors of plastic instruments when selecting nozzles for multiple instruments. INCOE ® International Europe found a way to take advantage of threaded nozzles and the high number of...
-
Plasma surface treatment of plastics - solutions for continuous and batch processes
- 20.09.2013
- Services
The company SurfaceTreat a.s. is focused on the development and application of plasma technology for surface treatment. The aim is to find an efficient solution of specific problems finishes with the environment in mind just using all the advantages that plasma technology provides - without using...
-
Šlechta s.r.o. in new hall!
- 18.09.2013
- Plastics Moulds
Šlechta Company, which is engaged in the preparation of molds for plastic products, opened a production facility in the old premises of the former laundry in J....
-
Special show at K 2013 - Plastics move the world!
Around 3,100 exhibitors will be part of 2013 K, the largest international trade fair for plastics and rubber, which will be held from 16 to 23 October in Düsseldorf /...
-
International Exhibition subcontractors automotive industry
We invite you to exhibition Automotive Hungary, which will be held under the auspices of the Office of the State Secretary of the Government for Foreign and...
-
Effect of Temperature of injection molds for the quality and price of thermoplastic moldings (part 2.)
The term tempering molds we include cooling or heating of the forming mold parts with a tempering medium to the desired temperature before the start of production and maintaining the operating temperature during cyclic injection in the desired tolerance range. When tempering leads to solidification...
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
Upcoming Events
17.07.2024 - 19.07.2024 | Beijing
17.07.2024 - 20.07.2024 | Surabaya
17.07.2024 - 19.07.2024 | Guangzhou
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)