Current News Articles - page 55
Daily updated information and news from the plastics industry.
-
WITTMANN 4.0 – the WITTMANN group’s answer to Industrie 4.0
On the way to Industrie 4.0, WITTMANN 4.0 provides an important element for integration and will be demonstrated at the Fakuma from 13 to 17 October on the injection molding machines exhibited there in hall B1, booth...
-
Nitra Autoshow 2015 - Photo Gallery
- 13.10.2015
- Services
- Automotive
- Autosalon
- Photo reportage
22nd annual inspections of passenger cars, utility vehicles and trucks is over. See photo gallery of attractive pieces of cars from the Nitra Motor Show, which ran from 8 to 11 October 2015...
-
Centralplast s.r.o. presents a new septic tank from the construction board Paneltim®
- 12.10.2015
- Plastics and Rubber products
- Plastic products
Septic is an appropriate solution for the discharge of sewage from buildings where no public sewerage or wastewater treatment plants. Most septic tanks consists of three chambers, where the wastewater in pure and there is consequently they are discharged eg. reasonable course or sewage...
-
RESINEX is DOW HDPE and Equate HDPE
High density polyethylene (HDPE) has, in contrast to LDPE or LLDPE, a minimum or no side chain in their molecules. This makes the individual molecules very close and are linked by strong intermolecular bonds that make HDPE stronger, thicker and stiffer than LDPE. This also causes the formation of...
-
Caspro s.r.o. - Comprehensive range of machinery for the Plastic industry
- 07.10.2015
- Machinery & Equipment
- Extrusion
- Interview
Caspro s.r.o. company based in Kosice, Slovakia, has been engaged in the supply of specific materials and facilities, especially for plastics processors, but also for other industries since its inception in 2002. More about the company's focus and its visions told us in an interview Mr. Ing. Pavol...
-
Professional experience at Kia - benefits for students and society
- 06.10.2015
- Services
- Automotive
In the school year 2015/2016 tactics of professional experience in the factory Kia Motors Slovakia 63 high school...
-
Get free tickets to the fair VISCOM Düsseldorf 2015
- 05.10.2015
- Services
- Exhibitions
MANIN EXPO as representation VISCOM Düsseldorf 2015 invites you to the International Trade Fair, which is an event no. One for industry and visual art will be held from 4 to 6 November 2015 in Düsseldorf,...
-
Smart Factory - what will bring us?
- 02.10.2015
- Machinery & Equipment
- Smart factory
- Industry 4.0
- Injection molding machines
- Injection molding
Currently, more and more articles on the subject of the so-called. Industry 4.0 thus imaginary fourth industrial revolution. This topic is not new, the Federal Republic of Germany under discussion in various professional circles for nearly ten years. And now also he arrived to us in the Czech...
-
Flame-retardant new developments in GRAFE
The GRAFE Group of Blankenhain will be presenting two new product developments at the upcoming Fakuma. Alongside other products, the company will be introducing an electrically conductive and halogen-free, flame-retardant PP compound at the international plastics trade fair which will be held from...
-
After the independent audit, we found that we have room for major improvements
- 30.09.2015
- Services
- Automotive
- Cost savings
Inalfa Roof Systems is one of the world's largest suppliers of roof systems for the automotive...
-
PolyOne Highlights Industry-Leading Developments at Fakuma 2015
- 29.09.2015
- Suppliers of raw materials
- Exhibitions
New developments in natural fiber reinforced materials, conductive thermoplastics, and in specialty engineered materials for metal replacement will be highlights of the PolyOne stand at the upcoming Fakuma trade show in Germany. In addition, experts from the company will make 15-minute Tech Talk...
-
Autoshow Nitra 2015
exhibition Motor Show again becomes in Nitra - Autoshow 2015, held from 8th to 11th October...
-
Polykemi AB at FAKUMA 2015
Our goal is to offer you technical solutions and saving by thinking outside the box – to help you see new possibilities and to really challenge conventional ideas & solutions. You are ready and so are we – to develop and implement new solutions...
-
Non-abrasive plastic cleaning fluid, cleaning screws and molds for plastics and rubber offers SUBTER PLUS s.r.o.
- 24.09.2015
- Machinery & Equipment
- Mold cleaning
Cleaning and blasting is non-abrasive plastic media stripping method, dirt and paint from metal, aluminum and plastic...
-
The technology of injection molding presses for Dr. BOY
- 23.09.2015
- Machinery & Equipment
- Injection molding machines
Company Dr. BOY offers more than 45 years of experience in the development and manufacture of injection molding machines with a workforce of more than 40,000 units delivered...
-
MSV Brno 2015 showed the future of the industry, photo gallery
- 22.09.2015
- Services
- Photo reportage
- MSV Brno
The 57th MSV was marked by a conjuncture. Czech industry thrives, businesses are investing and there was great interest in a trade fair presentation and a tour to see the exhibits. At the same time, this year was a window into the future: the main theme was focused on Industry 4.0 and the advent of...
-
The new president of the Association of Automotive Industry
- 21.09.2015
- Services
The automotive industry in Slovakia is among the key industrial sectors in the development of the national economy. Development of new technologies, global trends and strategies indicates that the automobile continues to remain one of the top five innovative industrial sectors in the world. It is...
-
Tempering injection molds - an important prerequisite for the production of thermoplastic moldings, Part 4
- 18.09.2015
- Plastics Moulds
The aim of constructor injection mold should be such proposal tempering plants that, while recognizing all possible restrictive criteria, will work with maximum efficiency in terms of the heat transfer while minimizing the surface area basis walls tempering...
-
Thermal cleaning of metal parts & tools
- 16.09.2015
- Machinery & Equipment
- Cleaning of machines
Working from their manufacturing headquarter in Germany, SCHWING designs, engineers, manufactures and markets the most advanced Thermal Cleaning Systems since 1969. Valuable experience resulting in industrial leadership and excellent processes with perfect results for the plastics and fiber...
-
The new picker SPX 10 SpruePicker has it all: speed, accuracy
Small automatic injection molding machines KraussMaffei CX series were introduced with the new picker SPX His servo drive is fully integrated into the automation control system MC6 and has a short cycle time and low operating costs at a minimum grabbing...
-
Software (not only) for packaging from A to Z
- 15.09.2015
- Plastics packaging
- Software for industry
One of the most interesting exhibitions MSV this year HELIOS Packaging Live (HPL). It can be seen in the pavilion Z, where you can also visit the booths of partners lines. The information technology literally rule the world, and the strojaøským accompanies this new packaging line: Active roofing...
-
The largest Czech exhibition of 3D technologies MCAE 3D expo presents unique exhibits in Brno
- 14.09.2015
- Machinery & Equipment
Following the huge success of the exhibition "The World of 3D technology", which the company MCAE Systems was organized last year in collaboration with its partners in the International Engineering Fair in Brno, this event this year will see its re-enactment called "MCAE 3D expo / World 3D...
-
Tempering injection molds - an important prerequisite for the production of thermoplastic moldings, Part 3
- 11.09.2015
- Plastics Moulds
(Continued) The mold temperature and its...
-
Slovnaft completes installation of technology in new production plant - LDPE4
- 10.09.2015
- Suppliers of raw materials
Slovnaft, a member of MOL Group, has completed installation of technology in new facility for the production of low density polyethylene - LDPE4. The company has invested more than EUR 300 million in units with the latest technology and other petrochemicals components which include reconstruction...
-
Lifocolor, s.r.o. officially opened a new production facility in Brno
- 09.09.2015
- Suppliers of raw materials
LIFOCOLOR, s.r.o., a subsidiary of German manufacturer of color concentrates, additives and compounding Lifocolor Farben GmbH, has invested more than €4m in the construction of a new production site in Brno on the street Erich Rouèka. On the occasion of opening a new plant in the Friday, June 19,...
-
Unique plastic container Magnum Optimum offers cost saving by Schoeller Allibert
- 07.09.2015
- Plastics packaging
Schoeller Allibert company has been operating in the Czech and Slovak market for 20 years. During this period became the largest supplier of plastic shipping and handling packaging in the Czech Republic and Slovakia. About the current offer of unique container Magnum Optimum that its properties and...
-
Tempering injection molds - an important prerequisite for the production of injection molded thermoplastics, part 2
- 04.09.2015
- Plastics Moulds
(Continuation )Mold temperature. Injection mold is viewed from thermal processes taking place in it is a very complex mechanism. For each production cycle in the appropriate dosage forms melt into the supply of certain heat...
-
motan-colortronic combines the best of two worlds
- 03.09.2015
- Machinery & Equipment
During this year’s Fakuma in Friedrichshafen from the 13th to the 17th of October in hall B1 stand 1111, motan-colortronic will show that the combination of established technologies from both motan and colortronic is key. The focus will be the METRO G material loaders, which can now be fully...
-
MicroMark™ Spray Marking Valve Systems from Nordson EFD
- 01.09.2015
- Machinery & Equipment
MicroMark spray marking valve systems can be used to color code similar components, indicate pass/fail, or show production or test...
-
Woojin Plaimm increases its production capacity and opened a new manufacturing facility in South Korea Boeun
- 31.08.2015
- Machinery & Equipment
In 2014 the company WoojinPlaimm, a manufacturer of injection molding machines in South Korea (in the Czech and Slovak are known under the brand Woojin Selex), opened a new manufacturing plant in Boeunu. Boeun town, which is located in the middle of South Korea, about 200 km south of Seoul, is in...
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
Upcoming Events
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
04.09.2024 - 07.09.2024 | Jakarta
05.09.2024 - 07.09.2024 | Karachi
08.09.2024 - 10.09.2024 | Cairo
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024