Current News Articles - page 47
Daily updated information and news from the plastics industry.
-
Investment group Aakon Capital acquired the Slechta company
- 13.02.2017
- Plastics Moulds
- Business economics
Aakon Capital acquires Slechta, a leading company in the surface treatment of forms based in Jindrichuv Hradec in the Czech...
-
HASCO Austria under new corporate leadership
After six successful years as manager of the company Hasco Austria Ges.mbH in Guntramsdorf leaving DR. Ernst Brenner at the end of February 2017 to deserved...
-
IPA Slovakia prepares the Conference of practical maintenance - New trends in maintenance
For the sixth year of the conference IPA Slovakia offers the opportunity to be inspired by modern trends and challenges in maintaining the unique maintenance system maintenance and evaluation of its subsequent optimization. Forum practical maintenance regularly visited by more than 200...
-
The extended version SGDE valve - application in ejector form
- 07.02.2017
- Machinery & Equipment
- Design of molds
SGD innovative system designed as relief valve SGDE is applied to the parting plane having the same buildings as standard bouncer. This gives you easier forms designer bleeding of application options. SGDE valve is available in standard lengths of 300 m and 400 mm with the possibility of shortening...
-
The Czech automobile industry broke the historical record in the production of motor vehicles
- 06.02.2017
- Services
- Automotive
For the year 2016 was in the Czech Republic According to data from the Automotive Industry Association (AutoSAP), produced more than 1.35 million vehicles. Production of motor vehicles recorded from January to December annual rate in excess of 8%. Automobile production increased last year, roughly...
-
Students participating in dual education attracts most scholarships and guaranteed jobs
- 02.02.2017
- Services
- Automotive
Kia Motors Slovakia in the school year 2016/2017 for the first time participated in the dual system of education. Since September last year, 22 vocational students of Mechanical Engineering in Kysucké New Town acquires theoretical and practical experience in the fields of automobile manufacturing...
-
MCAE represents the Czech market a new 3D scanner ATOS Capsule - optical device with high resolution for the most demanding tasks of production quality control
- 01.02.2017
- Machinery & Equipment
- 3D technology
The German company GOM GmbH via its distributor for the Czech Republic - Companies MCAE Systems - ATOS expanding its range of new 3D scanner based on technology surface projection streaks of light. It is intended to digitize the object's surface and dimensional control of part...
-
Schoeller Allibert won the prestigious WorldStar Award in the Automotive / Transport and industrial packaging
- 30.01.2017
- Plastics packaging
- Automotive
- Storage
Known manufacturer (not only) this range, the company Schoeller Allibert manufactures also plastic pallets and crates, pallets, containers, folding boxes...
-
Harness the power of machine tools for 110 percent or more
- 26.01.2017
- Services
- 3D technology
- Cost savings
Years, the development of CAM programs focused on maintaining development with the development of machine tools. Mostly with a delay of just reacting to new technical possibilities. Progressive milling technology trend turned and vice versa breathes conventional milling machines and tool for new...
-
Looking for a long-lasting coating for your gates, fence or rail? Use Pulron.
- 25.01.2017
- Suppliers of raw materials
- Surface treatment
Functional as well as aesthetic, like this is Pulron thermoplastic powder coating for...
-
Flexibility Is A Must
- 24.01.2017
- Machinery & Equipment
- Injection molding machines
The Magna Mirror Systems, founded in 1994, produces around 53 million exterior and interior mirror systems for the automotive industry and is one of the largest global...
-
US Study Tour 2017
United States is a country of contrasts and endless possibilities. In the south, you can enjoy the most beautiful beaches in the world lined with palm trees, Further - national parks, canyons, waterfalls and of course we can not forget the magic of large metropolitan areas, we know from the movies....
-
Stäubli robots for difficult environments
- 19.01.2017
- Machinery & Equipment
- Robotics
Medicine, pharmacy, biotechnology, food processing, electronics, semiconductor, photovoltaic, laboratories - for all these environments with demanding requirements can Stäubli offers a wide range of suitable robots. Most standard robots It is also available in a special version adapted directly...
-
The company ARSIQA system, s.r.o. brings you AROP - The planning and management
- 18.01.2017
- Services
- Software for industry
Our target customers are manufacturing factories virtually any...
-
ENGEL presenting new plasticising screws
- 17.01.2017
- Machinery & Equipment
- Injection molding machines
The plasticising unit has tremendous influence on the quality and performance of the injection moulding machine. To meet the customers' individual requirements in an even more targeted way, injection moulding machine manufacturer ENGEL AUSTRIA has revised and extended its portfolio of plasticising...
-
New Additive from GRAFE Improves Polymer Melt
- 16.01.2017
- Suppliers of raw materials
- Additives for plastics
The plastics processing industry is about reducing cycle times and thus decreasing production costs and energy consumption, and therefore the injection molding machine or the periphery is mostly targeted. In this process, the polymer itself has potential, if it succeeds in optimizing the processing...
-
Kia produced in Slovakia during 10 years more than 2.5 million cars and continue its investments
- 12.01.2017
- Services
- Automotive
- Business economics
Since the official launch of volume production on 7 December 2006 it rolled off the production line at Kia Motors Slovakia for more than 2.5 million cars and 3.8 million...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 4
Continuation of the article p. Lubomir Zeman dated December 29,...
-
Materials of the future in Slovakia
Magnesium and aluminum materials are promising future. Their use we talked to Frantisek Šimanèík of the Institute of Materials and Machine...
-
Cylinders with extended life
- 03.01.2017
- Machinery & Equipment
- Design of molds
Hydraulic cylinders for plastic molds are separate and special category rollers. Their application is different from a standard industrial rolls...
-
MCAE Systems launches a new generation of 3D Printers Stratasys Fortus, which significantly extend the capabilities of 3D printing
- 02.01.2017
- Machinery & Equipment
- 3D technology
Large format printer Stratasys Fortus 900mc meets the demands of the production 3D printers to high capacity, precision and repeatability. Additionally enables 3D printing of new material Stratasys FDM Nylon 6 and uses the printer software...
-
Feasibility study and manufacture of injection molded thermoplastics, part 3
- 29.12.2016
- Plastics Processing
Continuation of the article p. Lubomir Zeman dated December 22,...
-
PF 2017
To all our readers and business partners we appreciate your cooperation in the past year and the new year good luck, health, personal and professional...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 2
- 22.12.2016
- Plastics Processing
Continuation of the article p. Lubomir Zeman dated December 15,...
-
Preparing for Industrial Fairs Prague 2017 - be there!
- 21.12.2016
- Services
Becoming a tradition, the second week of May is held an exhibition at the PVA EXPO PRAHA for the products, machines and latest technology in mechanical engineering, logistics and energy. On 9 to 12 May 2017, will be held Industrial Fairs Prague and organizers for exhibitors and visitors are already...
-
Apparatus for testing the integrity of surface offers TITAN Multiplast s.r.o.
- 20.12.2016
- Machinery & Equipment
- Quality control
Apparatus from british company Buckleys can be successfully used for the control membrane, membrane film to the bridge structure, the insulating film, but also the weld or controlling the...
-
Not be afraid of Lean Administration and Master study FAQ
- 19.12.2016
- Services
- Cost savings
In February opens IPA Slovakia second year of Master study lean administration. Some questions about the course and the schedule of prospective students are repeated, so the author decided to write this article. The questions are divided into three areas. Perhaps the answer will also help you in...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 1
- 15.12.2016
- Plastics Processing
Injection molding has long been the most widely used technologies for the production of plastic parts for all industries. Its meaning and application is constantly increasing, mainly related to the development of the automotive industry, electronics, telecommunications technology, the production of...
-
Anti-draft curtains of soft PVC from TITAN - Tatraplast Ltd.
The striped curtains of soft PVC are used as anti-draft curtains, reducing heat loss in winter, limiting the leakage of cold from the freezer cabinets, preventing dust entering to the building and can serve as an additional source of...
-
GF Machining Solutions: Cut your work pieces faster than your competitors!
- 12.12.2016
- Machinery & Equipment
- Peripherals
The new electro-wire cutting machines labeled CUT E350 and CUT E600 are designed to significantly increase production capacity while maintaining the quality requirements of the areas cultivated. Technology oriented for cutting speed are now more productive and deliver customer financial...
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert For Sale: PVC granulate Sunprene MKD75DAE
16.07.2024 | ID: 202419495
-
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
Upcoming Events
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
04.09.2024 - 07.09.2024 | Jakarta
05.09.2024 - 07.09.2024 | Karachi
08.09.2024 - 10.09.2024 | Cairo
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)