Current News Articles - page 38
Daily updated information and news from the plastics industry.
-
Wittmann Battenfeld SK spol. s r.o. has purchased high quality Austrian peripherals for fast delivery to customers
- 07.11.2018
- Machinery & Equipment
- Peripherals
Wittmann Battenfeld SK spol. s r.o. In 2018 he bought the customer in a warehouse in Trencin as part of customer service improvement peripheral devices for fast delivery to...
-
Sales partnership extended: Biesterfeld distributes Solvay's sulfone polymers in Switzerland starting in 2019
Biesterfeld Plastic will distribute sulfone polymers, manufactured by Solvay, in Switzerland beginning in January 2019, following the extension of their mutual distribution agreement. The product portfolio includes the Udel® PSU, Radel® PPSU and Veradel® PESU brands. These products has been selling...
-
GRAFE increases counterfeit protection
- 05.11.2018
- Suppliers of raw materials
- Additives for plastics
At Fakuma 2018, GRAFE will present its latest developments of marker masterbatches for thermoplastics. The customized solutions are based on a combination of chemical substances and special analytical detectors to enable a combination for qualitative and quantitative product analysis. Thanks to...
-
Fakuma 2018: VELOX introduced new high-end raw materials for the plastics industry
VELOX GmbH, Europe's leading solution provider for the plastics, composites, additives, rubber, paints and coatings industries,took part in this year's Fakuma Fair, held in Friedrichshafen, Germany, on October 16-20, presenting its latest...
-
The secondary school of Otrokovice rises higher in the evaluation of schools in the Zlín Region
- 31.10.2018
- Services
The secondary school of Otrokovice was ranked as the 3rd best school in the Zlín region in 2014, then it was 2nd in 2015 and was rated as the 1st - the best school of the Zlín Region in 2017. The secondary school of Otrokovice, with its active activity and the range of all areas of secondary...
-
The largest meeting of international car manufacturers and suppliers in the Czech and Slovak Republics
- 29.10.2018
- Services
- Photo reportage
- Exhibitions
Automobile manufacturers and their largest partners want to reduce their costs efficiently by a stronger location of their subcontracting chains. Presented by representatives of the largest automotive companies at the second edition of CEE Automotive Supply Chain 2018 in...
-
FAKUMA 2018 was in the motto of plastic processing in digitization mode, see the Photo gallery
- 26.10.2018
- Services
- Photo reportage
- Exhibitions
The Fakuma Fair presents not only suitable injection molding, extrusion, molding and plastics additives, but also plastics recycling and hybrid technology solutions. With more than 1,933 exhibitors from 40 countries and an exhibition space of 85,000 m², Fakuma 2018 was fully...
-
PlasticPortal.eu again sponsored the Nitra exhibition and competition of plastic and paper models
- 25.10.2018
- Services
- Events
- Photo reportage
The Modeling Club Zobor Nitra, AMAVET, IPMS Slovakia, together with CVČ Domino and Nitra, organized an exhibition and competition of plastic and paper models entitled The Prize of the Mayor of City Nitra, the 24th year that took place on 20.10.2018 in...
-
ENGEL appoints Regional Sales Presidents
- 24.10.2018
- Machinery & Equipment
- Business economics
With the further development of its worldwide sales structure, ENGEL continues to strengthen its customer proximity. The 30 subsidiaries and more than 60 representations worldwide have been consolidated into seven regions, with a Regional Sales President appointed to each. Effective immediately,...
-
Arburg World premiere at the Formnext 2018: larger Freeformer - more applications
At the Formnext, to be held from 13 to 16 November 2018 in Frankfurt am Main, Germany, Arburg will be celebrating a world premiere with its Freeformer 300-3X. The new large machine will process three components using the Arburg Plastic Freeforming (APF) process, enabling the industrial additive...
-
Fillamentum Industrial is the new brand of Fillamentum
- 19.10.2018
- Suppliers of raw materials
- 3D Fillaments
Fillamentum, a Czech brand that is one of the world's leading brands in the production of strings for 3D printers, presented in September at the TCT show in Birmingham a new brand for professional use materials with the distinctive name Fillamentum Industrial. After a successful start at the Prague...
-
AUTOSALON - AUTOSHOW NITRA 2018 - Photo gallery
- 17.10.2018
- Services
- Autosalon
- Exhibitions
The largest and most comprehensive car exhibition AUTOSHOW NITRA took place from 11th to 14th October 2018 at the NATIONAL EXHIBITION agrokomplex in Nitra. More than 37,000 square meters featured 242 exhibitors with a total of 45 innovations, many accompanying events. We bring you a photo gallery...
-
Today begins the largest exhibition of plastic processors in Europe - Fakuma 2018
Functional plastic components with high resistance and lightweight construction, which are fiber-reinforced, offer great potential for the automotive and aerospace industries as well as for many other industries. Whether FRP, FFRP or CFRP - solutions for the production of large, lightweight...
-
ENGEL with new e-connect.monitor modules at Fakuma 2018
The challenge in maintaining and repairing injection moulding machines is to guarantee high availability while at the same time reducing costs. This is where e-connect.monitor from ENGEL comes in. The condition monitoring solution makes it possible to check the condition of process-critical machine...
-
Jubilee 60th MSV was Czech-Slovak and very successful - photo gallery
The Brno Exhibition Center lived for five days with industry and the most advanced technologies. An exhibition of 1651 exhibiting companies from 32 countries has occupied an area of more than 45,000 square meters. All areas of the exhibition center were sold out several weeks in advance, and the...
-
EuroBLECH 2018: Digitization opens up a huge potential for sheet metal companies
This year's International Technology Fair for Sheet Metal Processing will take place from 23 to 26 October in Hanover, Germany. Its exhibition stand will be held at the leading world trade fair, which will be strongly influenced by the topics of digitization and Industry 4.0, to be attended by...
-
Biesterfeld Plastic: Innovative Electric and Electronics Portfolio for E-Mobility
New technologies in e-mobility entail increased requirements for plastics and call for innovative product adaptations. Especially when it comes to higher electrical voltages and flame retardance, sophisticated materials are needed to satisfy these stringent requirements and enable all components to...
-
Fanuc adds slimline robots
- 09.10.2018
- Machinery & Equipment
- Automation
- Robotics
Supplier of automation and robotic solutions Fanuc has expanded its rich portfolio with its compact, universal thin robot. The sleek robot is the ideal solution for smaller workspaces and top-of-the-range...
-
KraussMaffei at Fakuma 2018: All-electric PX 320 will show double IMD and IML simultaneously
- 08.10.2018
- Machinery & Equipment
- Injection molding machines
Frame decoration and electronic equipment in one – and in the adjacent cavity another component that has a dead-front design. At Fakuma 2018(October 16 to 20, Hall A7, Booth 7303), KraussMaffei will show how far manufacturing integration can meanwhile go using the example of the all-electric PX...
-
Cimatron's path to facilitating the construction and production of injection molds from technology-support
Cimatron is a CAD / CAM system specializing in tooling and offers features that greatly facilitate the entire design and production process from supply to delivery. Based on the needs of the manufacturers involved in the construction and production of injection molds, Cimatron features for quick...
-
The company ENGEL present on Fakuma 2018 e-cap with even higher performance
- 03.10.2018
- Machinery & Equipment
- Injection molding machines
At the Fakuma trade fair in Friedrichshafen, Germany, 16th to 20th October 2018, ENGEL will demonstrate a further reduction in cycle times for the produc-tion of caps. An all-electric ENGEL e-cap 2440/380 will be used to produce 26 mm caps, including tamper-proof bands made of HDPE, at a cycle time...
-
WITTMANN BATTENFELD with new VPower at the Fakuma 2018
- 02.10.2018
- Machinery & Equipment
- Injection molding machines
At this year’s Fakuma in Friedrichshafen from 16 to 20 October, WITTMANN BATTENFELD will present its new, vertical VPower under the motto “be smart” in Hall B1, booth 1204. With this machine model, WITTMANN BATTENFELD is now also offering its vertical machine series in the PowerSeries...
-
New Portfolio of Temperature Devices built for Smart Production by Industry 4.0 from Piovan
- 01.10.2018
- Machinery & Equipment
- Control technology
The temperature of the mold or tool is a very important parameter in plastics production. They must be stable and precise as they directly affect the production costs and quality of the final products. The result of Piovan's innovative approach to innovation through research and product development...
-
Unique string FILLAMENTUM for 3D printing
Josef Doleček founded Fillamentum, which for four years set the world to star base high. From its unique strings for 3D printing, the backdrops in Star Wars are made and the first functional one printed speaker in the...
-
Synventive exhibited Hot Runner Systems and Advanced Control Technologies at MSV 2018
- 27.09.2018
- Machinery & Equipment
- Hot runners
Synventive, a business of Barnes Group Inc.’s Molding Solutions strategic business unit, will exhibit at MSV (Plastex) 2018 in Hall G1, Booth 55. The company will feature its innovative modular hot runner technologies and controls with a key focus on delivering a stable process, allowing for...
-
About the Polyol project is decided, the MOL Group has entered into a contract for engineering, purchasing and construction with thyssenkrupp
- 26.09.2018
- Suppliers of raw materials
- Business economics
The MOL Group has achieved another milestone in a strategic petrochemical project when EPC has concluded contracts with thyssenkrupp Industrial Solutions to implement the polyetherpolyol production...
-
New version of Moldex3D R16 simulation software from SimulPlast accelerates innovations of injected plastic parts
Thanks to enhanced functionality and enhancement, the latest version of the Moldex3D plastic injection molding software enables the new product development cycle and deliver them on the market in shorter time. So the Moldex3DR16 allows to achieve higher levels of efficiency and reliability of...
-
COMPUPLAST presenting co-ex Chill Roll line, latest development by LABTECH Engineering
- 24.09.2018
- Machinery & Equipment
- Extrusion
COMPUPLAST is delighted to present one of LABTECH Engineering's largest deliveries in over 35 years of history. It is a high-speed co-ex Chill Roll line, which we supplied in July 2018 to a customer in Germany, Klöckner...
-
Arburg at the MSV 2018: Expertise in multi-component injection moulding and additive manufacturing
- 20.09.2018
- Machinery & Equipment
- Automation
The MSV trade fair, to be held from 1 to 5 October 2018 in Brno, is the most important industry event in the Czech Republic and Slovakia. Here, Arburg will exhibit two plastic processing highlights on stand 33 in hall G1: A two-component Allrounder will demonstrate the high-volume injection...
-
MCAE Systems on MSV 2018 will introduce 3D technologies, the potential application of which will be use by every manufacturing company
- 19.09.2018
- Machinery & Equipment
- 3D technology
At the 60th International Engineering Fair in Brno, MCAE Systems will be presenting an area of nearly 300 m² of the latest technology in 3D optical metrology, 3D printing and CAD / CAM. There will be no practical applications, this year MCAE will introduce co-operation in tuning Lotus racing...
.gif)
Branch Dictionary
