Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 33/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 57.38 USD/barrel, increasing prices,
- EUR/USD: 1.118, Euro getting stronger
- NAPHTHA: 436.16 USD/t, falling prices,
- Relatively good sales in August,
- The monomer price drop is over
- Ethylene (C2) contract price +10€/t (1,010 EUR/t),
- Propylene (C3) contract price Roll-over (910 EUR / t),
- Styrene monomer (SM) contract price +33 EUR/ t (1,027 EUR/t),
- Polyolefin roll-over,
- Limited PS price increase,
- Demand better than expected
The final August prices quickly formed this week. Demand is weak, but slightly better than expected. Some converters secure themselves now, they are now buying at a low price, in many cases with late August delivery. Prices are close to this year's lowest level. In September, PPH and LDPE are unlikely to be that close to the 1,000 EUR price level. There are also skeptical companies that are expecting even lower prices for September due to oil and NAPHTHA price cuts. Against these expectations, NAPHTHA prices are at their June level, which has resulted in a massive July monomer price drop. And in August, olefin monomers did not rise (the price increase of C2 + 10 is more of a roll-over +). As a result, the NAPHTHA price drop does not yet mean a monomer price drop. Another important fact is that the market is on leave. Both plastic converters, their customers and polymer producers. This not only means fewer orders, but also slower cash flow. Thus, in spite of favorable purchasing opportunities, narrower cash flow discourages customers from buying in advance. The general holiday season is expected to end by the 19th. And then the market and cash flow are expected to rebound until the end of the month.
The price of SM has increased as expected (+33 EUR / t). However, due to weak demand, prices for polystyrene could not increase to the same extent. Like the polyolefin grades, the autumn season is expected to start after August 19th.
Polyolefin grades
Typical LDPE prices were in a range of 980-1,050 €/t last week. The cheapest prices are surprisingly from big European producers. While Central European producers are trying to maintain the price level around € 1,000. Most deals are made in a price range of 980-1,020 €/t. Demand has been better than expected last week. Cheap commodities are expected to disappear in the week ahead. And from August 19th, the bottom of the price range will be 990 and 1,000 €.
HDPE prices have also stabilized. Typical prices were in a range of 1,020-1,140 €/t. Demand is lowest in this product group. The biggest Central European producer is trying to stimulate demand with significant price reductions after a significant (-20 €) price cut. So far, with not much success.
Typical HDPE BM list prices in Central Europe were in a range of 1,020-1,100 €/t. In this way the bottom values of the price range have slightly dropped compared to July. Demand is good and supply is broad.
Typical HDPE IM prices ranged from 1,020 - 1,100 €/t in Central Europe. They did not change compared to July. Supply is good, demand is low.
HDPE Film grade prices were in a range of 1,020-1,120 €/t in Central-Europe. Demand is weak, rather MDPE grades are sought after, but their supply is still limited. Availability is expected only as late as by the end of August.
Typical HDPE (100) prices were in a range of 1,235-1,300 €/t last week. The cheap Saudi Arabian feedstock is sold out. The price range came to be narrower. The demand is in line with the season. Converters now have their main holiday season.
The typical LLDPE C4 prices were in a range of 980-1,040 €/t last week, depending on the grade and application area. It didn't change over the previous week. Supply and demand are balanced, both are weak. However, prices may start rising in the second half of August in parallel with Asian factory shutdowns and supply shortages. However, price changes are not expected in the week ahead.
mLLDPE (C6) prices were in a range of 1,120-1,250 €/t last week. Supply is good, demand is low. Prices have not changed compared to the previous week and will not change during the week ahead either.
PPH prices have generally remained unchanged. There were minor price reductions only in the PPH Raffia segment for smaller volumes. Goods are available at polymer producers. However, there is no willingness to reduce prices. Everyone is waiting for the end of the holiday season, hoping that the market will come to life and that prices and demand will rise. This expectation is supported by the fact that there is a lot of informal interest but little purchase.
The typical price of PPH Raffia in Poland was 980-1,080 €/t, while in other countries of Central Europe they were in a range of 990-1,100 €/t last week. Demand is weak and Central European polymer producers are trying to keep prices above € 1,000. We expect very weak demand in the week ahead.
The price of non-special PPM IM products with medium melt index was in a range of 1,000-1,130 €/t in Poland. Some smaller lots were sold at prices below 1,000 EUR/t. The prices in other Central European countries were in the range of 1,010-1,150 € / t. The prices of high flow index grades in Poland were in a range of 1,060-1,160 €/t and in other Central European countries in a range of 1,090-1,180 €/t. Demand is weak, the availability of all grades is good.
Typical prices for PPC were in a range of 1,150-1,240 EUR/t in Central Europe. Roll over happened. Cheaper South Korean materials are out of the market. Now, the bottom of the price range is the seasonal prices of Western European producers.
PPR was in the range of 1,190-1,270 €/t last week, compared to July the prices in the top band of the price range have dropped slightly. The bottom of the price band hasn't changed in principle. However, we received news from Poland of sales in a range of 1,150-1,180 EUR/t in case of the products of Western European producers.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the second week of Aug 2019, Central Europe (€/ton) |
HDPE BM | 1020-1100 |
HDPE Film | 1020-1120 |
HDPE IM | 1020-1100 |
HDPE Pipe (100) | 1235-1300 |
LDPE Film | 980-1050 |
LDPE GP | 990-1050 |
LLDPE C4 | 980-1040 |
mLLDPE C6 | 1120-1250 |
PPC | 1140-1270 |
PPH IM | 1000-1150 |
PPH IM HMFR | 1060-1180 |
PPH Raffia | 980-1100 |
PPR | 1190-1270 |
GPPS | 1100-1200 |
HIPS | 1145-1250 |
EPS | 1170-1240 |
ABS | 1400-1590 |
Polystyrene grades
EPS prices were in a range of 1,170-1,240 €/t last week. Customers did not accept EPS price increases following the SM price increase. Only 15-20 €/t price increase has passed through the market. So far EPS demand is weak. Both converters and polymer producers are hoping for the season to start on the 19th.
Typical GPPS prices were in a range of 1,100-1,200 €/t, while HIPS prices were in a price range of 1,145-1,250 €/t. As indicated, the rise in prices did not go through due to weak demand. Customers accept a price increase of only 10-15 Euro. Euro is expected to recover and low-cost import from outside of Europe will continue to be available.
ABS prices were in a price range of 1,400-1,590 € last week. Demand is low. European producers have officially raised their prices following the SM price increase. But there are still very cheap items around 1,400 Euro on the market. Probably from earlier production.Type | Price |
---|---|
HDPE blow molding | 1080 € / t |
HDPE film | 1074 € / t |
HDPE injection molding | 1069 € / t |
HDPE pipe (100) | 1268 € / t |
LDPE film | 1029 € / t |
LDPE general purpose | 1031 € / t |
PP co-polymer injection molding | 1218 € / t |
PP homo-polymer fiber | 1015 € / t |
PP homo-polymer injection molding | 1091 € / t |
PPR | 1254 € / t |
GPPS | 1154 € / t |
HIPS | 1206 € / t |
EPS | 1205 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
-
28.06.2024 | ID: 202419426
-
28.06.2024 | ID: 202419425
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
For Sale: HDPE regranulate - natural
15.07.2024 | ID: 202419482
-
15.07.2024 | ID: 202419481
Upcoming Events
17.07.2024 - 19.07.2024 | Beijing
17.07.2024 - 20.07.2024 | Surabaya
17.07.2024 - 19.07.2024 | Guangzhou
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)