Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 14/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 67.82 USD/barrel, stagnating prices
- EUR/USD: 1.232, Euro getting stronger
- NAPHTHA: 532.9 USD/t, increasing prices
- Slightly increasing contractual olefin monomer and steeply increasing contractual SM prices
- Ethylene (C2) contract price +30€/t (1,045 EUR/t),
- Propylene (C3) contract price +20 €/t (970 EUR/t),
- On the day when the report was written styrene monomer contract (SM) price was not yet known
- Demand in line with the season, yet precautious.
- Short PE and PP supply
Now it is already for sure that olefin monomer prices will increase, though spot propylene price was unchanged all over the month, until the middle of the last week. This has made market players uncertain. Yet the minor price increase that happened on Thursday-Friday supported the increase of the April contract price. The generally short PP supply induces a price increase generally exceeding the price increase of monomer grades in April. In case of polyethylene grades supply is getting shorter. In this way both LDPE and HDPE prices, first of all the bottom value of the price ranges, have started their way up. Supply remains short in April as well, due to the shutdowns in Central and Western Europe.
The price change of SM is not yet known. But the price increase can almost be taken for granted. Spot monomer prices increased by 65 USD compared to the beginning of the month. Players prepare also here for a price increase of similar magnitude.
Polyolefin grades
Typical LDPE prices were in a range of 1,010-1,120 €/t last week. Seemingly there was no change but the quantity of goods is extremely low in the lower price category. Supply is available rather in the price range of 1,050 -1,120 €. The market anticipates price increase, there was a high interest last week. For the time being not even the resolution of the production problems at SABIC results in the significant increase of the supply in Europe. This week the incident at the plant of LyondellBasell in Aubett causes supply bottleneck. We expect a price increase exceeding monomer price increase by 30-50 € by April.
HDPE supply is still short. But this did not result in price increase last week. Here the typical HDPE prices in Poland were in a range of 1,085-1,170 €/t. In the other parts of Central-Europe the price range was 1,120-1,200 €/t. The market anticipates increasing supply and prices in April. The rate of the price increase will follow monomer prices, at WE producers the rate of the price change can exceed monomer price increase.
HDPE BM prices are in a range of 1,090-1,170 €/t in Poland, while in a range of 1,130-1,190 €/t in other parts of Central-Europe. Supply is balanced for the time being. In April a price increase following monomer prices is probable.
The tendency of HDPE IM prices was similar in Poland and also in the other countries of Central-Europe. Last week we have measured prices in a range of 1,110-1,170 €/t last week. Supply is still short. In April the price of HDPE IM produced in Europe is expected to increase by 30-40 €/t.
In case of HDPE FILM grades, in Poland, prices were in a range of 1,100-1,170 €/t last week. In the other countries of Central-Europe the price range is 1,140-1,200 €/t. Here the upward movement seems to be clear, which is due to the short supply. In April, compared to the prices in March, we expect a price increase by 30-40 €/t.
Typical prices of HDPE (100) grades were in a range of 1,270-1,360 €/t they did not change compared to the previous week. The season in CE seems to be good, demand is good and increasing. A price increase by 40-50 € slightly exceeding monomer prices is probable in April.
LLDPE C4 supply increased, buyers can anticipate the price reduction in North-America to potentially affect Europe as well. The typical price range is 1,000-1,070 €/t. In April, in spite of the weakening of the USD no price increase exceeding 20 Euro is probable.
mLLDPE (C6) supply and demand were good and last week prices varied in a range of 1,150-1,300 €/t, depending on the grade and producer. Supply is balanced and demand is good. We expect a price increase corresponding to the monomer price increase. In April prices will be in a range of 1,180-1,320 €.
PPH demand is high. Supply is still short. The bottom of the price range increased last week, due to the minor price increase of the Serbian producer by 20 EUR. The typical price range is 1,140-1,260 €/t.
Typical PPH Raffia prices were in a range of 1,140-1,220 €/t in Central Europe last week. Supply is still short. We expect a price increase exceeding monomer prices by +30-40 €/t.
The price of non-special PPM IM products with medium melt index was in a range of 1,140-1,220 €/t last week. The prices of products with high melt index were in a range of 1,170-1,260 €/t last week. We expect a price increase exceeding monomer prices. In case of grades with low and medium melt index a price increase by +20-40 €/t and in case of those with high melt index a price increase by +30-40 Euro is probable.
Typical prices of PPC grades were in a range of 1,200-1,310 €/t in Central-Europe last week. Demand is good, soon also quantities imported from outside of Europe are sold out. In this way also the bottom of the price ranges can start increasing, thus leaving levels below 1,200 €. Typical price range in April is expected to be 1,240-1,350 €/t.
PPR demand was very good but supply continued to be short. The demand for pipe grades has increased dramatically. The price range was 1,280-1,370 €/t, depending on the grade, producer and application area. We expect an increase by 30-40 € in April.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the fourth week of March, 2019, Central Europe (€/ton) | Expectedpolymer price ranges in the first week of April, 2019, Central Europe (€/ton) |
HDPE BM | 1090-1200 | 1130-1240 |
HDPE Film | 1085-1200 | 1120-1240 |
HDPE IM | 1110-1170 | 1140-1230 |
HDPE Pipe (100) | 1270-1360 | 1300-1400 |
LDPE Film | 1010-1100 | 1040-1150 |
LDPE GP | 1010-1100 | 1050-1150 |
LLDPE C4 | 1000-1070 | 1020-1100 |
mLLDPE C6 | 1140-1280 | 1170-1320 |
PPC | 1220-1310 | 1250-1350 |
PPH IM | 1140-1220 | 1160-1250 |
PPH IM HMFR | 1170-1260 | 1190-1290 |
PPH Raffia | 1120-1220 | 1140-1240 |
PPR | 1280-1370 | 1300-1400 |
GPPS | 1210-1310 | SM is not published yet |
HIPS | 1260-1400 | SM is not published yet |
EPS | 1250-1300 | SM is not published yet |
ABS | 1490-1650 | SM is not published yet |
Polystyrene grades
The EPS season has not started yet, but demand is good. The typical price range where deals were made, was 1,250-1,300 €/t. Buyers are aware of the price increase that can be expected. The change of prices will probably be identical with the SM price increase.
Typical GPPS prices are in a price range of 1,220-1,310 €/t. while HIPS prices are in a price range of 1,260-1,400 €/t. They did not change compared to last week. Supply is short. A price increase by 60-80 EUR following monomer prices is probable.
ABS prices were in a range of 1,490 - 1,650 €/t last week. They did not change. Due to the broad supply a price increase lower than the SM price change is probable.
Type | Price |
---|---|
HDPE blow molding | 1147 € / t |
HDPE film | 1137 € / t |
HDPE injection molding | 1143 € / t |
HDPE pipe (100) | 1310 € / t |
LDPE film | 1041 € / t |
LDPE general purpose | 1038 € / t |
PP co-polymer injection molding | 1249 € / t |
PP homo-polymer fiber | 1177 € / t |
PP homo-polymer injection molding | 1183 € / t |
PPR | 1302 € / t |
GPPS | 1268 € / t |
HIPS | 1326 € / t |
EPS | 1272 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
-
28.06.2024 | ID: 202419426
-
28.06.2024 | ID: 202419425
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
For Sale: HDPE regranulate - natural
15.07.2024 | ID: 202419482
-
15.07.2024 | ID: 202419481
Upcoming Events
17.07.2024 - 19.07.2024 | Beijing
17.07.2024 - 20.07.2024 | Surabaya
17.07.2024 - 19.07.2024 | Guangzhou
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)