Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 11/2020
Increasing viral insecurity,
The following factors influenced “commodity” polymer prices last week:
- BRENT oil price 33.22 USD/barrel, falling oil prices
- EUR/USD: 1.1161, turning trend, strengthening of the Euro
- NAPHTHA (European): 296.63 USD/t, falling prices again,
- March contract monomer prices:
- All Central European polymer producers are producing.
- Expected outages:
- Rompetrol: 2020. March 15 - May 5, 2020 (LDPE, PP)
- Unipetrol: April 6 - May 18, 2020 (HDPE, PP, C2, C3)
- Logistic disruption, both in terms of raw material delivery and finished product delivery.
- Limited imports from outside Europe for both PE, PP and PS.
The effect of the CV-19 virus reached the plastics industry last week. Closure of borders results in a disruption of trade between countries. This affects both the polymer supply and the delivery of the finished product. Market participants have differing views on the economic impact of the health crisis, including the polymer market. Some dealers and distributors expect that a series of quarantine measures will also slow down plastic converters. Demand is falling. And converters fear that the supply of polymers will be hampered. Both expectations will probably come true. Depending on how long this health emergency lasts. So far, the vast majority of plastic converters have produced last week. Everyone tries to supply to customers. Each of them strives to avoid forced stoppage or to postpone its start as far away as possible. In fact, food packaging manufacturers have reported increasing orders. The plastic converters that produce for Western European, mainly Italian, export are in trouble. Because it is almost impossible to find a vehicle in these directions. Thus, de-facto sales cannot take place. This in turn has an impact on their entire value chain. Customers of finished products are asking for guarantees from plastic converters for continuous deliveries. In the case of finished products, advance purchases are also made.
Western European polymer manufacturers and traders also face shipping problems. In some cases, delivery of confirmed orders cannot be guaranteed. For the time being, there is no problem with shipping within countries. This also means that price levels and demand-supply conditions may vary from country to country in the near future. The single economic space is temporarily disintegrating into smaller markets. The biggest problem can be caused by the supply of materials that are not manufactured in Central Europe - EVA, mLLDPE, terpolymers, etc. Converters have tried to place additional orders for them already last week. Or ask for a guarantee from suppliers to deliver them.
Oil and NAPHTHA prices are plummeting due to the coronavirus. Presumably prices have not yet reached their lowest point. And they are likely to remain low until the end of the European coronavirus epidemic. This could mean further monomer price drops in April. However, polymer prices are likely to follow a different path, and prices will be determined by the supply-demand relationship. Because imports outside Europe are stagnant, so are intra-European shipments, and given the planned stoppages. In Central Europe, we have to expect a narrowing supply in the coming months. And gradually (continuously) falling demand, for all polyolefin and polystyrene grades.
Polyolefin grades
LDPE prices were in a range of 880-960 €/t last week. They did not change compared to last week. Demand in March is good, except for the SCE region. Demand is weak here, customers buy only the most necessary. Prices are expected to fall.
Typical HDPE prices were in a range of 850 - 960 €/t in Central Europe last week. Demand shows a mixed picture. It is weak in the southern region for the reasons outlined above. In other regions, due to virus insecurity, some companies buy in advance, while others cut back their orders. Typical prices for each HDPE grade were as follows:
- HDPE BM: 870-960 €/t,
- HDPE IM: 900-960 €/t,
- HDPE FILM: 850-940€/t,
The availability of HDPE for North American imports has decreased, partly due to dwindling supply opportunities and partly due to declining European supply.
Typical HDPE (100) prices were in a range of 1,050-1,150 €/t last week. Prices have dropped by € 50. In addition, customers expect a further reduction of € 20-30. This is based on the fact that one major producer in the Middle East has lowered prices by up to € 70 compared to February for larger orders.
LLDPE C4 prices were in a range of 885-1,020 €/t last week. Demand is uncertain. This is also indicated by the fact that prices in the southern region have continued to fall, with supply again at prices below 900 € / t. In fact, some traders are trying to get rid of their stocks, so they already offer LLDPE for less than € 900 in the Czech Republic. Since all Central European supplies are covered by imports from outside Europe, the supply may become insecure.
mLLDPE (C6) prices were in a range of 1,020-1,120 €/t last week. The price range has narrowed and average prices have fallen. The supply is wide, the demand is average.
Typical PPH Raffia prices were in a range of 910-1,020 €/t last week. They did not change. Practically there was a rollover compared to February. Even though there is a lot of customer pressure to cut prices. But producers, traders distributors are still resisting this. Demand is good except in the southern region. Rompetrol downtime will lead to a shortage of supply in the southern region.
The price of PPM IM non-special products with medium melt index was in a range of 900-1,030 €/t last week.The price of products with high melt flow index ranged from 970 to 1,080 €/t. Demand is good except in the southern region. Rompetrol downtime will lead to a shortage of supply in the southern region.
Typical PPC prices ranged from 1,040 to 1,180 €/t in Central Europe. Demand is still good. Due to transport difficulties, we expect a narrowing supply in Central Europe. This may also lead to an increase in the lower end of the price range.
PPR prices were in a range of 1,100-1,200 €/t last week. Demand showed mixed picture. There is a sense of uncertainty, both in the packaging and construction sectors.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the second week of March 2020, Central Europe (€/ton) | |
from | to | |
HDPE BM | 870 | 960 |
HDPE Film | 850 | 960 |
HDPE IM | 900 | 960 |
HDPE Pipe (100) | 1 050 | 1 150 |
LDPE Film | 880 | 960 |
LDPE GP | 880 | 960 |
LLDPE C4 | 880 | 1 020 |
mLLDPE C6 | 1 020 | 1 120 |
PPC | 1 040 | 1 180 |
PPH IM | 900 | 1 030 |
PPH IM HMFR | 970 | 1 080 |
PPH Raffia | 910 | 1 020 |
PPR | 1 100 | 1 200 |
GPPS | 1 020 | 1 110 |
HIPS | 1 100 | 1 190 |
EPS | 1 030 | 1 100 |
ABS | 1 350 | 1 500 |
Polystyrene grades
Typical EPS prices were in a range of 1,030-1,100 €/t last week. Demand is uncertain after an oil price collapse early in the week, buyers are uncertain about further price prospects. With the exception of a few Russian EPS, there is no import material on the market. Converters increasingly have to source their supplies from Central Europe.
Typical GPPS prices were in a range of 1,020-1,110 €/t, while HIPS prices were in a range of 1,100-1,190 €/t . Prices continued to fall slightly. Demand for the time being does not show a definite trend, but is not bad. Price expectations are down here, too, but the supply is limited. Demand is expected to grow during the week ahead.
Typical natural ABS prices were in the price range of 1,350-1,500 € last week. The average price drop was € 80. Supply is still wide and demand is weak compared to the same period last year.
Type | Price |
---|---|
HDPE blow molding | 908 € / t |
HDPE film | 916 € / t |
HDPE injection molding | 933 € / t |
HDPE pipe (100) | 1119 € / t |
LDPE film | 925 € / t |
LDPE general purpose | 924 € / t |
PP co-polymer injection molding | 1103 € / t |
PP homo-polymer fiber | 966 € / t |
PP homo-polymer injection molding | 968 € / t |
PPR | 1148 € / t |
GPPS | 1090 € / t |
HIPS | 1165 € / t |
EPS | 1074 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
To purchase: Regrinds and plastics producion waste (scrap)
15.07.2024 | ID: 202419488
To purchase: PA 6/66 GF 30 regrind
15.07.2024 | ID: 202419487
-
10.07.2024 | ID: 202419471
-
08.07.2024 | ID: 202419466
To purchase: PA 6/66 GF 30 regrind
08.07.2024 | ID: 202419453
To purchase: Regrinds and plastics producion waste (scrap)
01.07.2024 | ID: 202419442
To purchase: PA 6/66 GF 30 regrind
01.07.2024 | ID: 202419438
-
28.06.2024 | ID: 202419426
-
28.06.2024 | ID: 202419425
For Sale: Granulate PBT Pocan B1305(G)
24.05.2024 | ID: 202419225
Top Advert-
03.05.2024 | ID: 202419068
Top Advert -
15.07.2024 | ID: 202419490
For Sale: HDPE regranulate - white/grey
15.07.2024 | ID: 202419486
For Sale: PP COPO black regranulate
15.07.2024 | ID: 202419485
For Sale: PP gray regranulate - injection type
15.07.2024 | ID: 202419484
-
15.07.2024 | ID: 202419483
For Sale: HDPE regranulate - natural
15.07.2024 | ID: 202419482
-
15.07.2024 | ID: 202419481
Upcoming Events
17.07.2024 - 19.07.2024 | Beijing
17.07.2024 - 20.07.2024 | Surabaya
17.07.2024 - 19.07.2024 | Guangzhou
Australasian Waste and Recycling Expo 2024
24.07.2024 - 25.07.2024 | Sydney
Vietnam Manufacturing Expo 2024
07.08.2024 - 09.08.2024 | Hanoi
13.08.2024 - 16.08.2024 | Joinville
21.08.2024 - 24.08.2024 | Lima
Formnext + PM South China 2024
28.08.2024 - 30.08.2024 | Shenzhen
02.09.2024 - 04.09.2024 | Nanjing
17.07.2024
17.07.2024
17.07.2024
Australasian Waste and Recycling Expo 2024
24.07.2024
Vietnam Manufacturing Expo 2024
07.08.2024
Online webinar: VAT changes effective from 1.1.2025
23.07.2024
Central European Plastics Meeting 2024
24.09.2024
01.10.2024
02.10.2024
02.10.2024
Job offers
Project engineer with English or German - Branson Ultrasonics, a.s.
15.07.2024
Business - technical representative of professional tools - the whole SR - ant s.r.o.
11.07.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
09.07.2024
Coordinator of dual education - ESOX-PLAST s.r.o.
09.07.2024
Quality engineer - ULSTRUP PLAST s.r.o.
08.07.2024
Molder/Toolmaker - ULSTRUP PLAST s.r.o.
08.07.2024
Sales - Technical Representative - Central Slovakia - Wermaly s.r.o.
03.07.2024
Sales and Technical Representative - Eastern Slovakia - Wermaly s.r.o.
03.07.2024
Machine Tool Setter - AIS Automotive Interior Systems Slovakia s.r.o.
03.07.2024
Branch Dictionary
![](/images/logo-stand.png)